|
|
|
11-04-2019, 10:53 AM | #1 |
New Member
1
Rep 22
Posts |
Difference of exhaust fitment e88 vs e82
Does anyone know the fitment differences for an exhaust for e82 on the e88. I am looking to get BMR exhaust but they don't know if it will fit the e88. Is there extra bracing in the back since it's a convertible
Thanks! |
11-04-2019, 12:14 PM | #2 |
Major
854
Rep 1,118
Posts
Drives: Lots of BMWs
Join Date: Aug 2013
Location: RI/MA
iTrader: (0)
Garage List 2018 M4 Vert [0.00]
2006 Z4M Roadster [0.00] 1995 540i [0.00] 2008 BMW M5 [0.00] 2019 i3 Rex [0.00] 2021 X7 40i MSport [0.00] |
I dont think so as Turner doesnt show diff systems for E82 or E88 search. But I know in the past on some BMW models, the coupe exhaust did not fit the convertible.
__________________
2008 M5 6spd, 1995 540i 6spd
2018 M4 Vert Comp, 2019 i3 120ah REX 2021 X7 40i MSport, 2006 Z4M 6spd |
Appreciate
0
|
11-04-2019, 12:48 PM | #4 |
New Member
1
Rep 22
Posts |
it seems the exhaust part#s are identical. Just can't tell if there is extra bracing that would get in the way of a larger 3.5inch exhaust. Real oem doesn't seem to just show the underside x-braces (or i am horrible at finding it)
|
Appreciate
0
|
11-04-2019, 02:58 PM | #5 |
Captain
706
Rep 830
Posts |
There is bracing in back on E88. Don't have a clue how/if it would interfere with aftermarket exhaust though I do have Dinan Axle and braces are forward of that.
|
Appreciate
0
|
11-04-2019, 07:04 PM | #6 |
Enlisted Member
27
Rep 34
Posts |
E88 is different at cross brace by having the pipe slightly flattened so it goes over top of brace without hitting it. I switched my original exhaust for a 1m and had to have this done. If you go under car you should be able to see how pipe has a flat spot.
|
Appreciate
0
|
11-04-2019, 07:16 PM | #7 |
New Member
1
Rep 22
Posts |
There are convertible 1m??
|
Appreciate
0
|
11-04-2019, 07:17 PM | #8 | |
New Member
1
Rep 22
Posts |
Quote:
|
|
Appreciate
0
|
11-04-2019, 07:28 PM | #9 |
1Addict
3424
Rep 8,046
Posts |
3.5" exhaust basically doesn't fit either. It will take fiddling no matter what unless you have an oval cross section made
__________________
Daily: E82 Mutt
Hauler: M57 Truck Looking for: 997/991 |
Appreciate
0
|
11-04-2019, 09:58 PM | #10 |
Private First Class
75
Rep 187
Posts |
It won't fit.
I was under the car over the weekend looking at the e88 exhaust. The rear bracing is extremely close to the exhaust piping. I wanted to sleeve the middle resonator but because of the bracing it blocked me from just dropping the rear muffler back section to access the middle resonator. |
Appreciate
0
|
11-04-2019, 10:00 PM | #11 | |
New Member
1
Rep 22
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|