Xenon to halogen

[Drumbeat]

I bought my car and got home to find the headlights didn't work. The original xenon wiring had no insulation left on them.
I replaced my Xenon adaptive headlights with halogen. I used ncs expert to remove codes 522 and 524 and went through the process posted here previously - FA write CAS and NFRM etc... I now have low beam lights working. When activating high beam, the blue light indicates on the dash but the high beam lights do not come on.

Also using INPA I have fault codes -
* A8C6 daytime running lights (they never worked)
* A8C5 - left fog light (neither fog lights worked)
* 9CBB - Short circuit (I'm guessing because of the bare wiring in the original headlights)

Do I have to code other things, have I missed something? Or, am I physically checking and rewiring??

Thanks