|
|
|
10-11-2020, 07:50 PM | #1 |
Colonel
124
Rep 2,205
Posts |
oil pressure on track
Might be time for an oil accumulator, 28 psi at 3000 rpm!
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
Driving e82, e72, e85, R53 Gone but not forgotten.. 1974 2002, many various 3s. |
10-17-2020, 05:11 AM | #3 |
Colonel
124
Rep 2,205
Posts |
I added a oil pressure sender and feed it into my racecapture mk2 data logger.
here is more data, i'm going to add a accusump with 35psi switch, not sure where to put it though they are not exactly small more data and video, those left hand high g turns are a problem. I do not see as high of G force on right hand turns, either driver or car setup error not sure.
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
Driving e82, e72, e85, R53 Gone but not forgotten.. 1974 2002, many various 3s. |
Appreciate
2
135113.00 tracer bullet3450.00 |
10-17-2020, 08:55 PM | #4 | |
Supreme Galactic Commander (one galaxy over...)
697
Rep 1,784
Posts |
Quote:
__________________
Best,
Andy '12 E82-PS2,Stoptechs,Clubsports+M3 bits,Accusump,Wagner DP+EVO III FMIC,ERCP,BMS Intake,Mason Strut Bar,Wedge Tune |
|
Appreciate
1
houtan719.50 |
10-18-2020, 10:29 AM | #5 | |
Captain
113
Rep 682
Posts |
Quote:
What oil/weight do you use? |
|
Appreciate
0
|
10-18-2020, 06:24 PM | #6 |
Colonel
124
Rep 2,205
Posts |
no, I read the oil pan baffle threads and determined it was a waste of time as the data showed the problem is not resolved with just a baffle.
5w40, why do you ask?
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
Driving e82, e72, e85, R53 Gone but not forgotten.. 1974 2002, many various 3s. |
Appreciate
1
AndyW697.00 |
10-19-2020, 12:27 PM | #8 |
Colonel
124
Rep 2,205
Posts |
I would like to run the oil accumulator off the 2nd port but I am not sure where to get an adapter that is at least AN10, needs to be high flow unlike what I use for the oil pressure
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
Driving e82, e72, e85, R53 Gone but not forgotten.. 1974 2002, many various 3s. |
Appreciate
0
|
10-19-2020, 04:27 PM | #10 |
Colonel
124
Rep 2,205
Posts |
I found an adapter in the garage, not sure how much space there is between the line and the hood though ?!?!?
and where on earth can I fit a 2 quart accusump, this engine bay is cramped
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
Driving e82, e72, e85, R53 Gone but not forgotten.. 1974 2002, many various 3s. |
Appreciate
0
|
10-19-2020, 07:00 PM | #11 |
Colonel
1219
Rep 2,030
Posts |
you can put it anywhere... in the passenger seat... trunk... transmission tunnel... under the cowl... wherever you can find a place to strap it.
regular 90* will hit the hood I think. I use the mishimioto low profile Banjo and no interfeerence. |
Appreciate
1
AndyW697.00 |
10-19-2020, 07:54 PM | #12 |
Colonel
124
Rep 2,205
Posts |
that's much easier said than done, have you ever seen one done under the cowl?
I am contemplating relocated inlets and putting the accusump where the airfilters are now
__________________
You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape.
Driving e82, e72, e85, R53 Gone but not forgotten.. 1974 2002, many various 3s. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|