does anyone make an e82 dct Carbon driveshaft?

[katsooba]

Hey guys

I have been through the web and noticed that there are plenty manual or M3 dct carbon driveshafts, but none compatible with the e82 dct variant.

Any info if it can be found somewhere?

[Snertz]

VTT/PST offers custom lengths, essentially need a E92 AT shaft that's 119mm shorter. Could also ask MFactory if they can do custom length on their E82 N55 offerings.

YFCM offers custom lengths however you'd have to swap to an M3 rear end as their shaft is only compatible with the M3 6bolt diff input flange.

[ShocknAwe]

I asked YCW/MFactory about custom CF shafts since they only make them for the 1M now. Answer was no.

[AshwinLB]

there’s a guy who took an f8x carbon driveshaft and welded on the e9x flanges to retrofit it onto his e82

[katsooba]

Originally Posted by AshwinLB

there’s a guy who took an f8x carbon driveshaft and welded on the e9x flanges to retrofit it onto his e82

did he make it fit the dct? i know that the e82 dct has the oddest driveshaft length, that's why it needs a dedicated driveshaft made

maybe i am wrong, there isnt much info about this

[AshwinLB]

He’s manual, not much info but you can look at these pics:

[ShocknAwe]

Would be super cool. I'm going to need to use a DCT prop for my LS3 swap and want a CF unit.