|
|
|
04-20-2012, 12:52 PM | #67 |
Second Lieutenant
15
Rep 232
Posts |
I remember this from when I had a mini - didn't need it as I had a full alarm. However, my 135i vert does not have an alarm, nor is it prewired so I want to turn the clown nose on - which is similar to what was done with the mini (there the blinking LED is on top of the tach)... Anyone know if this will work? I have to resurrect all my NCS stuff so I can't just try it any time soon....
Okay, I can now confirm that it is possible to use NCS Expert to enable the blinking alarm light - even you don't have the alarm system! All you have to do is modify one setting in the KOMBI and SPEG modules. The initial setting will be: Code: DWA_VERBAUT nicht_aktiv Change this setting in both modules to read: Code: DWA_VERBAUT aktiv For reference, DWA_VERBAUT = "Diebstahlwarnanlage Verbaut" = "Theft Alarm Installed". Code those changes, and that's it - the light on the tach will blink when the car is locked using the remote. Opening a door or the hatch will cause the hazard lights to flash, but there's no audible alarm (unless you have the siren installed). There appear to be settings to enable flashing the headlamps as well, but I have not tried those - I figure the blinking light will be a sufficient deterrent to keep anyone from trying to break-in in the first place. |
Appreciate
0
|
04-20-2012, 01:36 PM | #68 |
Banned
36
Rep 357
Posts |
I would love for someone to post the absolute handheld baby noob way to turn off the double door pull after turning off the car, and the way to turn off the ambers from ever running besides when signaling a turn.
until that happens I'm not buying the cable because I'm scared of german :P peeti i wish you had of posted about that instead of the blinking alarm :P Last edited by phrenetiK; 04-20-2012 at 01:42 PM.. |
Appreciate
0
|
04-20-2012, 06:54 PM | #69 |
Second Lieutenant
15
Rep 232
Posts |
well Phren - if you can rally the troops to figure out if my thing is possible, that will push me into getting my system back together. Once I do, I can do a comprehensive writeup.
|
Appreciate
0
|
04-20-2012, 08:56 PM | #70 |
Colonel
214
Rep 2,938
Posts |
|
Appreciate
0
|
04-22-2012, 03:13 PM | #71 | |
Everyday I'm shuffling
451
Rep 1,098
Posts |
Quote:
The only way to open the door with one pull is if the doors are already unlocked. |
|
Appreciate
0
|
04-22-2012, 10:54 PM | #72 |
Banned
36
Rep 357
Posts |
someone mentioned having the car unlock itself after you hit the stop engine button so only 1 pull was needed.
|
Appreciate
0
|
04-29-2012, 08:35 PM | #73 |
.
19
Rep 260
Posts
Drives: 2011 BMW 135i Coupé
Join Date: Dec 2010
Location: Minnesota
|
Coded a couple things this weekend.
• Digital Speedometer • Close windows and moonroof with key fob • Disable amber corner lights when headlights are on • Disable iDrive Legal Disclaimer • Double Blink hazard lights • Disable Headlight washers • Eject key fob when engine stops • Unlock doors when engine stops Wasn't able to figure out Video in Motion.
__________________
2011 135i Black Sapphire Metallic / Coral Red
|
Appreciate
0
|
05-05-2012, 02:48 AM | #75 |
Captain
81
Rep 655
Posts |
Finally had success myself!!
2008 135i; Coded the following: • Digital Speedometer • Close windows and moonroof with key fob • Disable amber corner lights when headlights are on • Double Blink hazard lights • Disable driver seatbelt warning • Disable seatbelt chime • Enabled EfficientDynamics (Shift Indicator) • Enable auto-headlight sensitivity setting in board computer • Disable key-in-ignition chime Before you give me a hard time about disabling the seatbelt chime: In over 18 years of driving I have honestly never driven without wearing a seatbelt. However, in the same 18 years, I've developed a habbit of starting the engine first and then putting on the seatbelt before leave the garage. Of course the car complains about this which is very annoying. Well WAS anyway! . |
Appreciate
0
|
05-06-2012, 05:00 AM | #77 |
Colonel
88
Rep 2,438
Posts |
Does anyone know how to code out ambers when unlocking car or when turning on ignition?
Also is it possible to test AC compressor using INPA? Last edited by RimasRS; 05-06-2012 at 09:24 AM.. |
Appreciate
0
|
05-06-2012, 12:02 PM | #78 | |||
Everyday I'm shuffling
451
Rep 1,098
Posts |
Quote:
Quote:
Quote:
I assume it involve a cable and software. Where to get them? How hard is it to do? |
|||
Appreciate
0
|
05-06-2012, 12:31 PM | #79 | |
Captain
81
Rep 655
Posts |
Quote:
https://docs.google.com/spreadsheet/...CPqY7sEC#gid=0 But some were different on my 1 series. Feel free to contribute to this new spreadsheet with what's been working for you: https://docs.google.com/spreadsheet/...WaUVWS1E#gid=0 I'll try to add more later. |
|
Appreciate
0
|
05-06-2012, 12:32 PM | #80 | |
Captain
81
Rep 655
Posts |
Quote:
http://www.one-stop-electronics.com/...&product_id=16 Software: http:// b m w c o d i n g . c o m |
|
Appreciate
0
|
05-07-2012, 04:32 PM | #81 |
.
19
Rep 260
Posts
Drives: 2011 BMW 135i Coupé
Join Date: Dec 2010
Location: Minnesota
|
The software and daten at bmw-coding was all out of date for coding a 2011 1er. This is the newer software that I scrounged together that ended up working: http://www.christopherkriens.com/share/CODINGAPPS.zip
__________________
2011 135i Black Sapphire Metallic / Coral Red
|
Appreciate
0
|
06-03-2012, 05:24 PM | #82 |
BMW 1M
92
Rep 390
Posts |
I went to a local BMW Dealership to recode my key fobs with a printed copy of this thread.. and they had absolutely no idea how to do this.
Who am I supposed to go to properly code for some of these features? If I purchase the cable, download the software, and configure based on the codes posted above - is that just about it? Is it difficult to DIY? Thanks in advance! |
Appreciate
0
|
06-10-2012, 11:51 AM | #84 |
Lieutenant
48
Rep 567
Posts |
So I have some coding updates!
Using NCS Dummy, which is a helper companion tool to NCSExpert, I was able to disassemble the module programming for an X5's Idrive, and enable Video in Motion! For my own car, I successfully tuned the DRLs so I have angel eyes alone in front and nothing at all in back. Looks good. Also increased the angel eye brightness in DRL mode. Next little projects... - Change auto turn signal from three to five blinks (also needs a disassembly). - Change brightness of lights when using the ParkLicht function (this illuminates one side of the car to mark your position on the side of the road, I want to reduce the brightness of the taillight, and use the side marker as the front marker, and turn off the angel eyes). - Change angel eye brightness at night to be a little more white, when Xenons are on. - access radio settings using the Can-Most gateway. Would love to have weather and working. Coding does take a fair amount of research, but once you get going, it is good fun and not really that difficult. |
Appreciate
0
|
06-10-2012, 12:15 PM | #85 | |
BMW 1M
92
Rep 390
Posts |
Quote:
|
|
Appreciate
0
|
06-10-2012, 03:13 PM | #86 | |
Major
49
Rep 1,003
Posts |
Quote:
__________________
"The Camaro's V6 makes so much horsepower because them horses are trying as hard as they can to run the fuck away from that ugly ass car." -Golden3ye
Last edited by AW128i; 06-10-2012 at 06:37 PM.. |
|
Appreciate
0
|
06-10-2012, 06:26 PM | #87 |
Captain
81
Rep 655
Posts |
|
Appreciate
0
|
06-11-2012, 06:04 AM | #88 |
Lieutenant
48
Rep 567
Posts |
NCSDummy reads in your .man file and can show you every possible answer for different codes. For example, not everything is aktiv or nicht_aktiv... Sometimes the answer is wert0x where x could be from 1 to whatever. Sometimes the answer is word, like hart_einschalten or panik_alarm (two that happen to come to mind).
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|