Help me fix these fault codes...

falcon8760 · 05-25-2026, 12:04 PM

Hi,

New guy here, I recently purchased a 2013 BMW 135i (N55/E82) that cranks over but doesn't start. Scanning it on my Xtool D8 I am getting the following codes:

371A Current
2DB6 History
371E History
29D0 Current
2DB5 Current
371B Current

A103 Current

I checked the ground, it's good. Can hear the low pressure pump when ignition turns on. When cranking the tach registers some RPMs. Rail pressure shows 140 psi, tried starting fluid but didn't work. Where do I concentrate my efforts now?

falcon8760 · 06-01-2026, 05:38 AM

Nevermind, I figured it out. The valvetronic system damaged the DME.

05-25-2026, 12:04 PM	#1
falcon8760 Registered 0 Rep 3 Posts Drives: 2013 BMW 135i Join Date: May 2026 Location: Alabama iTrader: (0)	Help me fix these fault codes... Hi, New guy here, I recently purchased a 2013 BMW 135i (N55/E82) that cranks over but doesn't start. Scanning it on my Xtool D8 I am getting the following codes: 371A Current 2DB6 History 371E History 29D0 Current 2DB5 Current 371B Current A103 Current I checked the ground, it's good. Can hear the low pressure pump when ignition turns on. When cranking the tach registers some RPMs. Rail pressure shows 140 psi, tried starting fluid but didn't work. Where do I concentrate my efforts now?
	Appreciate 0 Tweet Quote

06-01-2026, 05:38 AM	#2
falcon8760 Registered 0 Rep 3 Posts Drives: 2013 BMW 135i Join Date: May 2026 Location: Alabama iTrader: (0)	Nevermind, I figured it out. The valvetronic system damaged the DME.
	Appreciate 0 Quote