Need Help ASAP CDV Delete!!

1EuroDelivery · 06-13-2008, 10:27 PM

Hey guys - how the hell do you fit a wrench in that small space to get a decent turn to tighten/loosen the damn bleed valve?! My car's sitting on ramps right now and I can't really fit the wrench in to get a turn in!

Mods: I think I duplicated this post by accident...

driftdriven · 06-13-2008, 10:37 PM

Bump for you!!

3toM · 06-13-2008, 10:41 PM

I looked - Larryn is not logged in currently. I know he did it. Sorry.

1EuroDelivery · 06-13-2008, 10:47 PM

Thanks for the support guys! Friday night I realize is not the best time to reach people...argh....

Templedogg · 06-14-2008, 01:35 AM

I just used a thin small carburator style wrench without issue.

larryn · 06-14-2008, 06:39 AM

^^ +1 for Templedogg. I just stuck a wrench up there and didn't think twice about how. It just fit. I remember it not being that tight either, so even though the wrench is smaller, it wasn't difficult to loosen.

mad chemist · 06-14-2008, 02:09 PM

Quote:

Originally Posted by dclee1

Hey guys - how the hell do you fit a wrench in that small space to get a decent turn to tighten/loosen the damn bleed valve?! My car's sitting on ramps right now and I can't really fit the wrench in to get a turn in!

Mods: I think I duplicated this post by accident...

Had the same issue with friends install.

You need to get a flexible screwdriver which has an adaptor for fitting small 12mm socket.

Worked for me, just took 1 hour to find a shop that sold the flexible screwdriver wrench!

Mad.

p.s. I was able to bleed the clutch from below, just 2 very gentle depressions on the clutch pedal from a friend. 1st press and some air came out, 2nd press was only fluid. I used a proper hose clamp on the reservoir side, which really helped.

1EuroDelivery · 06-15-2008, 03:11 PM

Thanks, guys...The wrench was really tight fitting in; since I was stuck at my parents' garage and needed to get home, I ended up turning the bolt about 1/10 turn at a time by bringing in the wrench at an angle and bringing it perpendicular as I turned the bolt. I definitely stripped a bit of the edges as I turned, but eventually it got done.

Thankfully the mod was well worth it, but frustrating for a time there nonetheless.

ChrisK · 06-16-2008, 01:47 PM

So.....how do you like the MT today?

1EuroDelivery · 06-16-2008, 04:03 PM

Quote:

Originally Posted by ChrisK

So.....how do you like the MT today?

Oh man, it's so much more freeing it's unbelievable.:roundel: It's better to the point where it's really frustrating that BMW even decided to make it as restricting as they did! Everyone MUST do this mod!

06-13-2008, 10:27 PM	#1
1EuroDelivery Lieutenant 26 Rep 469 Posts Drives: Join Date: Nov 2007 iTrader: (0)	Need Help ASAP CDV Delete!! Hey guys - how the hell do you fit a wrench in that small space to get a decent turn to tighten/loosen the damn bleed valve?! My car's sitting on ramps right now and I can't really fit the wrench in to get a turn in! Mods: I think I duplicated this post by accident...
	Appreciate 0 Tweet Quote

06-13-2008, 10:37 PM	#2
driftdriven Captain 55 Rep 905 Posts Drives: BMW 135i Join Date: Apr 2008 Location: Canada iTrader: (0)	Bump for you!!
	Appreciate 0 Quote

06-13-2008, 10:41 PM	#3
3toM Lieutenant 18 Rep 511 Posts Drives: 2013 335i EB Msport Join Date: Oct 2008 Location: SoCal iTrader: (0)	I looked - Larryn is not logged in currently. I know he did it. Sorry.
	Appreciate 0 Quote

06-13-2008, 10:47 PM	#4
1EuroDelivery Lieutenant 26 Rep 469 Posts Drives: Join Date: Nov 2007 iTrader: (0)	Thanks for the support guys! Friday night I realize is not the best time to reach people...argh....
	Appreciate 0 Quote

06-14-2008, 01:35 AM	#5
Templedogg Captain 49 Rep 799 Posts Drives: 135i, Trailblazer SS, 1934 PU Join Date: Oct 2007 Location: Lake Stevens, WA iTrader: (1)	I just used a thin small carburator style wrench without issue. __________________
	Appreciate 0 Quote

06-14-2008, 06:39 AM	#6
larryn Lieutenant General 2153 Rep 10,176 Posts Drives: '97 332ti, '21 X5 45e, '16 GT4 Join Date: May 2005 Location: Seattle iTrader: (2)	^^ +1 for Templedogg. I just stuck a wrench up there and didn't think twice about how. It just fit. I remember it not being that tight either, so even though the wrench is smaller, it wasn't difficult to loosen.
	Appreciate 0 Quote

06-15-2008, 03:11 PM	#8
1EuroDelivery Lieutenant 26 Rep 469 Posts Drives: Join Date: Nov 2007 iTrader: (0)	Thanks, guys...The wrench was really tight fitting in; since I was stuck at my parents' garage and needed to get home, I ended up turning the bolt about 1/10 turn at a time by bringing in the wrench at an angle and bringing it perpendicular as I turned the bolt. I definitely stripped a bit of the edges as I turned, but eventually it got done. Thankfully the mod was well worth it, but frustrating for a time there nonetheless.
	Appreciate 0 Quote

06-16-2008, 01:47 PM	#9
ChrisK Major General 4470 Rep 7,589 Posts Drives: '19 M2C Join Date: Jun 2007 Location: Chicagoland iTrader: (7) Garage List 2019 BMW M2C [7.00] 2015 Porsche Macan S [0.00]	So.....how do you like the MT today? __________________ www.ReTuneTheDeTune.com 2019 M2 Competition (Sunset Orange)
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search