|
|
|
06-03-2022, 08:01 AM | #1 |
Private
29
Rep 50
Posts |
BMW 1 Series exhaust cutout/straight pipe adapter
BadlanzHPE 2.75" custom exhaust cutout Y-adapter, never installed. This was measured for MPE and is flared for cut out and mount with clamps, no welding. Just mark off 6" to remove, slip over, and clamp down. Includes necessary hardware, not shown is the turndown pipe which will be included. This lets you straight pipe your 1 series M Performance Exhaust when you want by either using the included plate or adding in an electronic or vacuum-actuated valve cover (which was my original plan). The inner diameter for each flared end of the Y pipe/cutout adapter (that would go between your midpipe and exhaust) is roughly 70mm on both ends. Images: View post on imgur.com $75 shipped to CONUS Venmo/Paypal FF/CashApp/Zelle/Crypto accepted. Last edited by blacksh33p; 06-28-2022 at 10:00 AM.. |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|