best map for procede v5?

[NOM3ERY]

Whatsup fellas im currently running map 2 on my procede v5...i have full bolt ons on my car except meth..am i on the right map if not whT map do i put it on for most power and max boost?

[infinitekidM2C]

Generally speaking Procede uses an auto-tune to adjust itself based on conditions (takes a few pulls over 4k rpm to adjust). Maps in the Procede are not super important because of this...there are 2 "maps" so that you can jump to a more or less aggressive tune quickly without waiting for the adaptation.

Having said that, what firmware and what date maps are you using?

[NOM3ERY]

Originally Posted by infinitekid2002

Generally speaking Procede uses an auto-tune to adjust itself based on conditions (takes a few pulls over 4k rpm to adjust). Maps in the Procede are not super important because of this...there are 2 "maps" so that you can jump to a more or less aggressive tune quickly without waiting for the adaptation.

Having said that, what firmware and what date maps are you using?

thanks buddy for helping me out again...and i really dont know the firmware i know its the latest one because i bought it about a month ago...anf i dont know that data maps im not to good wiyh it yet. I fo know there 3 maps i can switch from and nap 3 is na map...just trying to figure out if map 1 or map 2 gives u the most power

[infinitekidM2C]

Honestly; if i were you i'd hook up my laptop and download the latest user softwrae, firmware and maps..here's the link:http://www.e90post.com/forums/showthread.php?t=557395 just to be sure..and make sure to activate autotune...i'm really loving this software/map version.

you're going to want to get familiar with updating and how to operate the tune in general (and it's easy)...no better time than now

[FedeM]

Map2 with autotuning ON is correct...
Use 7-29 maps.

[NOM3ERY]

Originally Posted by infinitekid2002

Honestly; if i were you i'd hook up my laptop and download the latest user softwrae, firmware and maps..here's the link:http://www.e90post.com/forums/showthread.php?t=557395 just to be sure..and make sure to activate autotune...i'm really loving this software/map version.

you're going to want to get familiar with updating and how to operate the tune in general (and it's easy)...no better time than now

Thanks for the link and yes your right i gotta learn sooner or later

[infinitekidM2C]

what kinda octane is available at the pump in the old country muccio?

[NOM3ERY]

Originally Posted by MuCcIo

Map2 with autotuning ON is correct...
Use 7-29 maps.

Thanks buddy also how do i know if my autotune is on?

[infinitekidM2C]

Once u load the maps just go to the user adjustable menu in the user software (on your laptop) and you'll see the autotune option..i believe you have to set it to "2"--should be on that by default but make sure.

[KidRobot]

Originally Posted by MuCcIo

Map2 with autotuning ON is correct...
Use 7-29 maps.

Isn't the 7-29 maps BETA?

Any idea when they'll be done testing?

[sear]

Originally Posted by infinitekid2002

Once u load the maps just go to the user adjustable menu in the user software (on your laptop) and you'll see the autotune option..i believe you have to set it to "2"--should be on that by default but make sure.

Autotune is actually OFF by default and Autotune was disabled in all released V5 maps this year other than 7-29. As stated above, spend some time learning the proceed user interface via laptop and get to know the user paramters...