Sponsored by The Tire Rack

[MunichMike]

Anyone running a square rear setup of style 264's? Post pics if u got any

[MunichMike]

no one?

[Bimmer-Bob]

What is a "square rear" set up? Might help if you clarify. You mean stock rear wheels on all 4 corners?

[horsepower_and_hounds]

Think he means a set of rears on the front also.....

[631twentyeighteye]

I've always wondered this myself.

offsets are 18x8.5 et 52 for oem wheels. I think they'd fit without issue, so long as you use spacers.

[lastMleft]

There was a thread about this a while back, and if i remember correctly the rears in the front rub, best way to know for sure take your car to a shop and have them put your rear in front, or have them measure.

[chachacha28]

i did, i dont have any pictures, but i think i used like a 12 or 15mm spacer and lots of camber (maxed out vorschlag plates). before i maxed the plates i had almost 1" of tire sticking out past the fender, and the fender was restiing on the tire.

I wish i could help more, but it is possible.

[PrematureApex]

Plenty of guys do it. You don't need even camber at stock height.

There are threads on it.

[MunichMike]

Thanks for the replies, I'll jack up the car in the next few days and see how it looks/fits, just haven't had time

[VMRWheels]

Originally Posted by 631twentyeighteye

I've always wondered this myself.

offsets are 18x8.5 et 52 for oem wheels. I think they'd fit without issue, so long as you use spacers.

You'd need at least a 7mm spacer for them to fit.