|
|
|
02-11-2016, 02:16 AM | #1 |
Private
43
Rep 62
Posts |
130i Race Car
Amspeed are selling my 130i race car for me, details here; https://racecarsdirect.com/Advert/De...-challenge-car PM me or call Arran at Amspeed, its got to go so a deal to be done! I spent thousands on it, full spec; BMW E87 130i 3.0 N52 M-Sport Built From A New BMW Motorsport Shell - Nr16-15/67-S Engine – 3 Hours. Full Race Specification N52B3.0 by Anderson Race Engines; 375BHP, Wedged Crank, Iron Sleeved Block, CP Pistons, Farringdon Con Rods, Custom Piper Billet Race Cams, Solid Lifters, One Piece Valves, Vanos/Valvetronic/Vacuum Pump Deleted. Baffled Sump, Setrab Oil Cooler, Remote Mocal Oil Filter, Electric Rad Fan & Water Pump With Override, E36 M3 Throttle Bodies, Green Injectors, E46 M3 Throttle Actuator, ITG Filter, Bosch 033 Fuel Pump, Fuel Regulator & Swirl Pot, Solid Engine Mounts, Torque Techniques Race Manifold- 30mm Headers, 75mm 102 dBA Exhaust System Transmission – Solid Mounted Std Getreg 6 Speed Gearbox with New CAE Ultrashifter, New Helix Single Piece Lightweight Flywheel, New Helix Twin Plate Paddle Clutch and Release Bearing. 4:56 BMW Motorsport C/W & Pinion with Drexler LSD Electrics – Motec M800 Inc. Logging/Drive By Wire/Vanos & Water Pump Control, Motec PDM30, Motec C125 Display Full Logging & GPS. Full Race Engine & Chassis Loom By GWR Motorsport Including Engine Dyno Loom Adaptor. Odyssey Light Weight Battery & Box Suspension – Intrax Black Titan 1K2 Coil Overs, Front Adjustable Top Mounts, Solid Mounted Front & Rear Sub Frames, E92 M3 Arms & Anti Roll Bar, Adjustable Front Drop Links, Spare Intrax Adjustable Front Springs Sysytem Brakes – Front 6 Pot AP Calipers, Fully Floating 365mm AP Discs & Bells, RS29 Pads. Rears Std With RS29 Pads. Goodridge Braided Lines, Adjustable Pedal Box & Tilton Brake Proportioning Valve, Hand Brake Interior – Recaro SPG XL HANS Seat, Schroth Harness Dated 2017, Sparco Steering Wheel on Racetech Quick Release Boss, OMP Electronic Fire Extinguisher System, Touring Car Electronic Battery Isolator Exterior – Standard M-Sport Body Panels, Lexan Side & Rear Windows, Heated Laminated Front Screen, Drivers Door Window Slider, Front Aero Catches Wheels & Tyres – 2 Sets of Team Dynamics Pro Race Wheels, 8 x 18 Front, 9 X 18 Rears, One Set On Yokohama AD-08’s, Motorsport Studs & Copper Finish Nuts Spares – 130 Cup Splitter and Flat Floor, 107 dBA Rear Box, Track Day Muffler, 3 x Gearbox’s – One Stripped , 2 x Std Cylinder Heads, Two Spare Sets of 130 Cup Wheels, Selection Of Body Panels Inc. Wings, Cills, Door. 4 x Rear Lights, Refurbished Helix Single Mass Flywheel and Race Single Plate Clutch. Pair Of Ohlins DFV front Struts and Set of KW Clubsport Coil Overs Requiring Rebuild, 3.9 BMW Motorsport C/W & Pinion. 4 X Driveshaft’s, Std Gear Stick Assembly, Spare of Front and Rear Discs, Engine Block C/W Race Rods and Standard Pistons - 1 Hour Dyno Only, 130 Cup Manifold, Rear Bumper & Bar. Plus Various Other Engine, Chassis & Body Components. ‘Specialists Covers’ Outdoor Tailored Cover |
02-17-2016, 06:15 AM | #2 |
Colonel
151
Rep 2,120
Posts |
Anderson race engines seem like the "go to" built motor for track duty over there.
I want so bad..
__________________
BMW CCA # 473001
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|