|
|
|
10-25-2018, 02:51 PM | #1 |
Captain
595
Rep 704
Posts |
Rear Subframe Bushing(s) Tool
Hey guys,
I have been digging up some old threads on the RSFB and how creative some of you have become, made your own tool and got the bushings out. Some of you even used "standard" bearing/bushing tool(s) with success, since i do not have that luxury, i was wondering if one can use a "standard" wheel bearing tool set/kit and remove the RSFBs. I also came across these two items: https://www.amazon.de/eBay-Silentlag...f-7b5a58c1d2cf https://www.amazon.de/Silentlager-Ab...f-7b5a58c1d2cf The second one is peeking my interest, since it comes with various size spindles, which means it could help with not just the RSFB but also would work if i ever decide to replace the wheel bearings (at one point) in the future. My local DIY shop has a set, but i am unsure what size is the spindle (it looks to be an M16 size, which would be too big i guess). Any opinions would be appreciated. |
10-30-2018, 11:55 AM | #2 |
Captain
580
Rep 685
Posts |
I used a kit like that it worked fine, I think it was actually a bearing press kit. The rods in mine weren't long enough though so I had to use some grade 8 threaded rod, and even that was stretching like crazy pushing in the aluminum bushings.
|
Appreciate
1
Zombie_Head595.00 |
11-04-2018, 10:11 PM | #3 |
Supreme Galactic Commander (one galaxy over...)
697
Rep 1,784
Posts |
I got the real deal after failing with several of the DIY methods. Made it so much easier. Totally worth $300. And no, I don't have any association with the company.
https://www.germanspecialtytools.com...d-e90-91-92-93
__________________
Best,
Andy '12 E82-PS2,Stoptechs,Clubsports+M3 bits,Accusump,Wagner DP+EVO III FMIC,ERCP,BMS Intake,Mason Strut Bar,Wedge Tune |
Appreciate
1
fe1rx1496.50 |
11-05-2018, 10:54 AM | #4 |
Captain
595
Rep 704
Posts |
Thank you both for your feedback, i appreciate it.
Sadly i am in no position to spend another US$300 + shipping on a tool i will be using once. I will check again with the DIY tool and certain we can figure out how to remove the bushings. |
Appreciate
0
|
11-05-2018, 12:21 PM | #5 | |
Colonel
2196
Rep 2,815
Posts |
Quote:
And if only for removing the existing bushings ( if going 2 pc poly) did you have to drop the subframe much?
__________________
E82 - BMWP Springs / Koni Yellows / M front control arms / Adjustable front endlinks / M rear guide rods / Whiteline Poly RSFB
F22 - Stock M Sport, 6MT |
|
Appreciate
0
|
11-05-2018, 06:44 PM | #6 | |
Supreme Galactic Commander (one galaxy over...)
697
Rep 1,784
Posts |
Quote:
I did the whiteline 2-piece poly. You have to drop it some but it is easy if you drop both halfway (but still attached), then support with a floor jack while you drop front or rear, do them, then rebolt and do the other set (i.e. two bolts always in). Oh, and yes, you really do need to disconnect the brake lines regardless.
__________________
Best,
Andy '12 E82-PS2,Stoptechs,Clubsports+M3 bits,Accusump,Wagner DP+EVO III FMIC,ERCP,BMS Intake,Mason Strut Bar,Wedge Tune Last edited by AndyW; 11-06-2018 at 07:32 AM.. |
|
11-06-2018, 12:07 PM | #7 | |
Major
548
Rep 1,233
Posts |
Quote:
It's how my mechanic did it. |
|
Appreciate
0
|
11-22-2018, 11:08 AM | #8 |
Captain
1497
Rep 791
Posts |
Thanks AndyW for this link:
https://www.germanspecialtytools.com...d-e90-91-92-93 Just got one myself to do a change from M to solid aluminum. Nothing like having the right tool for the job. I originally installed the M using the makeshift method and wasn't looking forward to doing it that way again. This tool extracted the M bushings effortlessly and pulled the the Turner solid aluminum bushings (which are a serious interference fit) in with the help of a good long breaker bar. |
Appreciate
0
|
11-22-2018, 12:50 PM | #9 |
Captain
595
Rep 704
Posts |
That tool is €250 for the parts in the first diagram.
Another €110 for the lower part, that is €360 to do the bushings once....expensive for a one time use. I was able to remove all the bolts and lower the rear subframe in 40 minutes, so by my book it is a 3 hour job (removing the bushings included). Most shops will charge the same money, now if one plans to replace the M3 bushings to poly/solid ones in the future, yes i can see the "investment" in this tool. I do not like leaving my car in a shop and letting someone else work on my car, just had bad experience, but the more i think about it, the more that tool makes sense for someone like me. That company, the one that sells the tool, also rents tools. I will also give them a call tomorrow and see if one can rent that tool, would be nice. Last edited by Zombie_Head; 11-22-2018 at 01:14 PM.. |
Appreciate
0
|
11-23-2018, 03:50 AM | #10 |
Captain
595
Rep 704
Posts |
Good news, i contacted the shop selling that tool you linked, they do rent tools.
They are renting the tool for €100 for 1 week, including postage to me and back to them, which is a very good deal. Already gave them the green light, should get the tool by tomorrow or no later than Monday. |
Appreciate
0
|
12-03-2018, 10:38 AM | #11 |
New Member
6
Rep 27
Posts |
these are a decent tool for the job
https://mp-uk.com/bmw/3-series/e46-1...e36-e46-x3-z4/ |
Appreciate
0
|
12-03-2018, 08:49 PM | #12 |
California-bound
389
Rep 1,480
Posts |
Torch, a big impact socket, a few jacks and a friend sitting in the trunk for extra weight gets the job done for the broke people, like me.
__________________
Streets of Willow: 1:27.7 CW 11/15/15; 1:29.5 CCW 8/15/15 |||| Autoclub Speedway ROVAL (CCW): 1.52.6 - 12/2/17
Willow Springs - Big Willow (CW): 1:35.8 - 3/31/18 |||| Buttonwillow #13 (CW): 1:59.3 1/27/18 https://www.facebook.com/JakeStumphRacing |||| http://www.youtube.com/user/RaceMeMZ3 |
Appreciate
2
Zombie_Head595.00 chris_flies3035.00 |
12-06-2018, 09:46 PM | #13 | |
Lieutenant
65
Rep 523
Posts |
Quote:
1) the rear is on jack stands since the wheels are off 2) You put your jack under the rear diff and undo the RSFB bolts 3) Lower the jack and place the socket between the body and the RSFB 4) Heat up the subframe and jack up the rear diff to push the bushing out of the bottom Is that the method or am I missing something? |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|