VSRF Kit

[NewDirection]

Hey everyone,

To install the VSRF CP in an N54 135i, what do you need from their kit?

I bought a CP from someone privately and they only included the CP itself and two little couplers for the DVs.

I saw the kit comes with another bigger coupler and a bunch of c clamps. Are these necessary for the install?

[Petro135]

You need the silicone hose and the 2 large clamps to connect the chargepipe to lower chargepipe. Just use the o-ring from the old chargepipe to connect it to the engine side

[NewDirection]

Originally Posted by Petro135

You need the silicone hose and the 2 large clamps to connect the chargepipe to lower chargepipe. Just use the o-ring from the old chargepipe to connect it to the engine side

Hey, thanks for the response. So I can't reuse the existing hose to go from VRSF charge pipe to lower charge pipe, correct?

[G3min1]

That is correct. You will have to get the VRSF elbow coupler just like the one shown in the photo. They go to $23 (https://www.vr-speed.com/vrsf-replac...2-e90-e92.html)