|
|
|
01-29-2024, 07:01 PM | #1 |
First Lieutenant
522
Rep 328
Posts |
US HIDs to ROA HIDs Conversion Help
I’m currently trying to convert my headlights (US/NA spec HIDs) to the Euro/ROA HID headlights.
After plugging them in, only the low beams/high beams and turn signals work, angel eyes and DRL does not. I looked at the socket and moved around one wire and the DRLs are now functional. My problem now is the angel eyes, in the Euro/ROA spec lights they are a separate plugged H10 bulb, which does not exist on the US/NA spec. My question is, how do I wire the H10 bulb to the main headlight wiring harness so that it functions? I know that one wire must go to the DRL light, does the brown go to the ground wire? If so, does anyone know which socket is for ground? Sorry I am no electrician so any help would be appreciated. Thanks. |
01-31-2024, 03:08 PM | #2 |
Enlisted Member
14
Rep 32
Posts |
Brown is usually ground but not always. You can check with a continuity tester from the brown to a bare metal ground (but make sure it's not hot first by checking for voltage).
This link may help with diagrams, haven't tried it myself: https://www.bimmerfest.com/threads/a...-2023.1436615/ |
Appreciate
0
|
01-31-2024, 04:26 PM | #3 | |
First Lieutenant
522
Rep 328
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|