|
|
|
08-03-2015, 03:37 PM | #24 |
!
742
Rep 3,267
Posts |
Looks like one 2" and one 2.25" pipe form the inlet to the Y. Seemed weird to me, but is consistent with the diagram on the installation instructions:
__________________
____________________________ Last edited by Bimmer-Bob; 08-04-2015 at 03:05 PM.. |
Appreciate
1
|
08-03-2015, 04:22 PM | #25 |
Brigadier General
836
Rep 3,855
Posts |
|
Appreciate
0
|
08-04-2015, 02:01 PM | #27 | |
Major
548
Rep 1,233
Posts |
Quote:
Also, surprised they failed so quickly....so much for quality I guess.... |
|
Appreciate
0
|
08-04-2015, 02:34 PM | #28 | |
!
742
Rep 3,267
Posts |
Quote:
It's just that the Ohlins are so good on the street that the Bilsteins seem, in retrospect, a little uncivilized by comparison. The damping is just very, very good on the Ohlins. Things like expansion joints and rail crossings are absorbed effortlessly and undramatically, where they were always a little more "bumpy" on the Bilsteins. Don't get me wrong, the Bilsteins provided an undeniably sporting ride, and I didn't complain about it when I owned them. The stock suspension had a tendency to "crash" over bumps while simultaneously managing to feel uncontrolled and without poise, a worst of both worlds scenario.
__________________
____________________________ |
|
Appreciate
0
|
08-05-2015, 10:58 PM | #31 |
Brigadier General
3452
Rep 4,113
Posts |
|
Appreciate
0
|
08-06-2015, 02:03 AM | #32 |
First Lieutenant
179
Rep 365
Posts |
Thanks for sharing Bob; really good info there.
I'm pretty keen to hear how your magnaflow cat-back sounds too. I've got aftermarket headers abd it's a bit quiet but I'm worried going for a PE will be too loud. |
Appreciate
0
|
08-12-2015, 05:26 PM | #34 | |
!
742
Rep 3,267
Posts |
Quote:
Plus, it seemed like a nice way to refresh a 5-year-old car that I have no intention of getting rid of (sort of justifies the expense a little, too, since I'm telling myself I'm saving a bundle versus buying a new Alfa 4C or something, lol).
__________________
____________________________ |
|
Appreciate
0
|
08-13-2015, 08:21 AM | #35 | |
Resident Tamed Racing Driver
300
Rep 4,697
Posts |
Quote:
__________________
2005 E46 M3 Interlagos/Cinnamon with Sunroof Delete
|
|
Appreciate
0
|
08-14-2015, 02:08 PM | #36 |
!
742
Rep 3,267
Posts |
New Wheels
For the last several years, I've been lucky enough to live in warm climates that allowed for the use of summer tires year-round. I've generally run whatever autocross tire I was using at the time on the street as well, both in season and out of season, which means that I've run my 17" APEX ARC-8 square set up as my only wheel, full-time, since I bought them a couple years ago.
I'm anticipating a move next summer to the Pacific Northwest, which means that I will no longer have the luxury of running one wheel/tire combo year-round if I intend to autocross in the summertime and daily drive safely in the (admittedly mild) winters. Rather than switch out tires twice a year, I decided to pick up a set of "street" wheels, on which I will likely run all-season tires, and reserve my ARC-8's for autocross and track days. Impressed with the quality, cost, and performance of my current APEX wheels, it wasn't long before I looked to them for a suitable street wheel. I came across the AERO-7 wheels, and was immediately impressed: stylistically, they remind me a little bit of my old Style 216's - although they are much lighter - and I like that they're a little bit different than the mesh CSL-style wheels that everyone (myself included) seems to have. The fact that they were designed from the ground-up in 1er-specific fitments was a big plus, since, as many of you know, aftermarket wheel fitment can be a challenge with this chassis. Originally, I was going to try and go for a square set up again, but I would've had to run 225 series tires all the way around, and I decided against that. Ultimately I decided to run the wheels as they were designed, which is a staggered set up of 18x8.5" in front with 225-series tires, and 18x9" in back with 255 -series tires. In this application, as a daily driven street wheel, I decided I could sacrifice some of the performance benefit of my square set up (17x8.5" wheels with 245-series tires). In other words, for normal street driving well below the limit, a little more show than go is okay. Then I discovered the AERO-7 had been discontinued by APEX, mainly due to poor sales, I think. This was disconcerting, because I wasn't planning on buying my street wheels until late 2016. I checked APEX's stock, and sure enough, they were low in every finish. In fact, you couldn't get a complete set in any single finish. But the wheels were discounted by about 20%. So rather than wait until next year and look around for another set of lightweight wheels in ideal fitments at an affordable price, I decided to pick up a set of mismatched AERO-7's on sale. I would have to have them refinished to match, of course, but the benefit to that was that I could do so in any color I wished. Lately I've become enamored of ceratin matte and satin bronze finishes I've seen around, often on HRE and VMR wheels. After selecting a powder coater, I sent off to Prismatic Powders for a handful of different color swatches. It's hard to decide on a color based on pictures on the internet. The color your seeing may not be at all accurate, and is so dependent on camera settings, lighting conditions, viewing monitor, etc. Not only that, but the style of the wheel itself I think can affect the way a color is perceived - for example, the same color may look slightly different on thin spokes versus on the barrel of the wheel. So I took the color swatches into different lighting conditions, and tried to decide what looked the most "right." A couple days ago, my powder coater sent me a pic of the end result; here's an APEX AERO-7 in Triple Bronze: To be honest, sometimes I look at it and it's perfect, and other times I think it's not quite what I had in mind. Like I wish it was a little darker, or a little flatter, or something. I'm reserving final judgement for when I can unbox the wheels and see them in person (this pic was under fluorescent lighting, by the way). Here's a Photoshopped version with what looks to be a more accurate white balance, and the color looks truer to the swatch I previewed. If the wheel comes out this way, I think I'll be very happy:
__________________
____________________________ Last edited by Bimmer-Bob; 08-14-2015 at 05:42 PM.. |
Appreciate
0
|
08-14-2015, 06:01 PM | #37 |
First Lieutenant
52
Rep 374
Posts |
Nice wheels! It's hard getting good representative pictures of metallic type materials. So much of how it looks depends on the angle of the camera and the lights.
I've lived in Seattle for the past 4 years and honestly, it's possible to use summer tires all year round. It rarely snows (usually only 1 or 2 days a year if that). I have winter tires so I can go up to the mountains for skiing but if I didn't do that, I wouldn't need them. Granted, I have not tried using real autox tires (e.g. 200 TW tires like RS3s) so maybe those won't be practical with all the rain outside of summer. I've just been autocrossing with my stock run flats for now. Trying to get them completely worn out before switching.
__________________
New Car: 2019 Porsche 718 Cayman GTS | Stock for now Old Car: 2013 BMW 128i | 6MT | BMW Performance Grills | CDV Delete | SSK | Performance Exhaust | M3 RSFB | TCKR DA |
Appreciate
0
|
08-15-2015, 12:17 AM | #39 |
!
742
Rep 3,267
Posts |
To the points above: it's not that I need a true "winter tire" for snow conditions or anything like that, but the city I will be moving to in the PNW sees lows in the 30's and 40's ten months out of the year, so I just don't think a dedicated summer tire is the best choice for year-round use.
Also, wet traction is not my concern, but it's just a fact that the RE-71R's are not going to be a good tire in freezing temps, despite the fact that winters will be mild in comparison to many other locales. Many of the high performance all-season tires are rated for light winter use, so I think it may be smart to have a "jack-of-all trades" tire on hand. It's also a way to preserve tread life in a fast-wearing 200 TW tire, and save the RE-71R's for what they were meant for (real performance driving), while using a practical daily drive tire on the street. And, let's be honest, it's also a way to rock a second set of wheels on a more cosmetic basis (although I do think the Satin Black 17" ARC-8's with RE-71R's look pretty darn good, too).
__________________
____________________________ |
Appreciate
0
|
08-15-2015, 09:50 PM | #40 | |
Brigadier General
3452
Rep 4,113
Posts |
Quote:
FWIW I think you made / are making a good decision. And the wheels color seems like it should go well w/ the car, hope it works out like you want. |
|
Appreciate
0
|
08-16-2015, 04:11 PM | #41 | |
Banned
2471
Rep 9,004
Posts |
Quote:
|
|
Appreciate
0
|
08-17-2015, 05:27 PM | #42 | |
Brigadier General
836
Rep 3,855
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|