What did you do to/for your 1er today?

desertman123 · 07-26-2018, 03:01 PM

Quote:

Originally Posted by low135

Thank you for reminding me to buy the whiteline inserts. I knew there was something I was missing before doing a a big install and tune day. Good luck with yours!

They make a nice difference for the price.

Also I found a decent deal on this locally lol

low135 · 07-26-2018, 03:04 PM

Quote:

Originally Posted by desertman123

Quote:

Originally Posted by low135

Thank you for reminding me to buy the whiteline inserts. I knew there was something I was missing before doing a a big install and tune day. Good luck with yours!

They make a nice difference for the price.

Also I found a decent deal on this locally lol

Nice! how much do those go for? I've got a front and rear I'm gonna sell soon but not sure what they're going for. I just wanna get rid of them cheap

Also, my headlights came in. Gonna go take off my bumper and remove my oem lights to see if these work. There's a bunch of wires underneath the lights that are just loose ends? it has a plug for the harness so I'm kind of wondering what these loose ends are for. Guess I'll find out soon

xQx · 07-26-2018, 04:12 PM

Quote:

Originally Posted by low135

So, I was wanting to do a power dome hood but hate the look of pins or latches. I finally found a separate weld on dome so that I can modify my OEM hood and not worry about adding latches or the hood flying up. Best of both worlds for people that want that look

Where'd you find that, I'm interested.

The cost of shipping makes a Seibon rather expensive in Australia; that and the legality of a CF hood is questionable. ... I'd love to get a weld-on powerdome.

low135 · 07-26-2018, 04:50 PM

Quote:

Originally Posted by xQx

Quote:

Originally Posted by low135

So, I was wanting to do a power dome hood but hate the look of pins or latches. I finally found a separate weld on dome so that I can modify my OEM hood and not worry about adding latches or the hood flying up. Best of both worlds for people that want that look

Where'd you find that, I'm interested.

The cost of shipping makes a Seibon rather expensive in Australia; that and the legality of a CF hood is questionable. ... I'd love to get a weld-on powerdome.

Sent you a PM

YearOneOne · 07-26-2018, 05:42 PM

Quote:

Originally Posted by low135

Quote:

Originally Posted by desertman123

Quote:

Originally Posted by low135

Thank you for reminding me to buy the whiteline inserts. I knew there was something I was missing before doing a a big install and tune day. Good luck with yours!

They make a nice difference for the price.

Also I found a decent deal on this locally lol

Nice! how much do those go for? I've got a front and rear I'm gonna sell soon but not sure what they're going for. I just wanna get rid of them cheap

Also, my headlights came in. Gonna go take off my bumper and remove my oem lights to see if these work. There's a bunch of wires underneath the lights that are just loose ends? it has a plug for the harness so I'm kind of wondering what these loose ends are for. Guess I'll find out soon

I assume those loose wires are for the adaptive headlight module

Also those looks really good like oe good

low135 · 07-26-2018, 06:05 PM

Quote:

Originally Posted by YearOneOne

Quote:

Originally Posted by low135

Quote:

Originally Posted by desertman123

Quote:

Originally Posted by low135

Thank you for reminding me to buy the whiteline inserts. I knew there was something I was missing before doing a a big install and tune day. Good luck with yours!

They make a nice difference for the price.

Also I found a decent deal on this locally lol

Nice! how much do those go for? I've got a front and rear I'm gonna sell soon but not sure what they're going for. I just wanna get rid of them cheap

Also, my headlights came in. Gonna go take off my bumper and remove my oem lights to see if these work. There's a bunch of wires underneath the lights that are just loose ends? it has a plug for the harness so I'm kind of wondering what these loose ends are for. Guess I'll find out soon

I assume those loose wires are for the adaptive headlight module

Also those looks really good like oe good

So, this is where the experimentation begins lol these lights are listed for halogen models only. I've been told from someone else that they we're plug and play for his US 135i. So, I'm going to try it and see what the results are. The seller provides free returns up to 60 days so I figured it was worth trying

desertman123 · 07-26-2018, 06:46 PM

Quote:

Originally Posted by low135

Nice! how much do those go for? I've got a front and rear I'm gonna sell soon but not sure what they're going for. I just wanna get rid of them cheap

Also, my headlights came in. Gonna go take off my bumper and remove my oem lights to see if these work. There's a bunch of wires underneath the lights that are just loose ends? it has a plug for the harness so I'm kind of wondering what these loose ends are for. Guess I'll find out soon

I got mine for 275 in good condition, a few scratches but nothing that'll make the paint guy hate me. I've seen them listed anywhere from 300-600 for the rear w valence

minirips2 · 07-26-2018, 07:27 PM

I finally got around to wrapping the dull aluminum window trim with dry weave carbon 3M Di Noc vinyl. It's a huge difference visually. I honestly don't know why I waited so long..

varoadking · 07-26-2018, 08:39 PM

Well done ^^^^^^^^^^^^^^^^^^^^^

asiflicious · 07-26-2018, 08:53 PM

Sad news. Had to cancel my order and get a refun on the Koni Yellows since it was starting to seem like I'd have to wait several months to receive them. Oh well, I guess I'll just wait until they're in stock and reorder them at a later point

JimVonBaden · 07-26-2018, 09:17 PM

Quote:

Originally Posted by low135

Nice! how much do those go for? I've got a front and rear I'm gonna sell soon but not sure what they're going for. I just wanna get rid of them cheap

Also, my headlights came in. Gonna go take off my bumper and remove my oem lights to see if these work. There's a bunch of wires underneath the lights that are just loose ends? it has a plug for the harness so I'm kind of wondering what these loose ends are for. Guess I'll find out soon

Those look great. Now I want them.

The wires are for the Halogen lights so you can make the halos work, like the uglier ones I installed. You can unplug your old headlight and plug in the new ones just sitting on the inner fender above them.

Mine:

low135 · 07-26-2018, 09:21 PM

Quote:

Originally Posted by JimVonBaden

Quote:

Originally Posted by low135

Nice! how much do those go for? I've got a front and rear I'm gonna sell soon but not sure what they're going for. I just wanna get rid of them cheap

Also, my headlights came in. Gonna go take off my bumper and remove my oem lights to see if these work. There's a bunch of wires underneath the lights that are just loose ends? it has a plug for the harness so I'm kind of wondering what these loose ends are for. Guess I'll find out soon

Those look great. Now I want them.

The wires are for the Halogen lights so you can make the halos work, like the uglier ones I installed. You can unplug your old headlight and plug in the new ones just sitting on the inner fender above them.

Mine:

Thanks, I'll have to mess with the wires. I'm awful with electrical. Didn't realize the harness would reach the lights like that. I'll have to try that and make sure everything works first

JimVonBaden · 07-26-2018, 09:22 PM

Quote:

Originally Posted by low135

Thanks, I'll have to mess with the wires. I'm awful with electrical. Didn't realize the harness would reach the lights like that. I'll have to try that and make sure everything works first

I would. My first left light was defective. I had to pull it all apart to replace it.

low135 · 07-26-2018, 09:24 PM

Quote:

Originally Posted by JimVonBaden

Quote:

Originally Posted by low135

Thanks, I'll have to mess with the wires. I'm awful with electrical. Didn't realize the harness would reach the lights like that. I'll have to try that and make sure everything works first

I would. My first left light was defective. I had to pull it all apart to replace it.

I realized the tools I had didn't fit into some of the recessed bolt locations to get the lights out so I put my bumper back on. I'll try that first now that I know the harness will reach

HyeWarrior · 07-26-2018, 10:17 PM

Quote:

Originally Posted by asiflicious

Sad news. Had to cancel my order and get a refun on the Koni Yellows since it was starting to seem like I'd have to wait several months to receive them. Oh well, I guess I'll just wait until they're in stock and reorder them at a later point

I ordered my set in late May and finally received them last week

asiflicious · 07-26-2018, 10:20 PM

Quote:

Originally Posted by HyeWarrior

Quote:

Originally Posted by asiflicious

Sad news. Had to cancel my order and get a refun on the Koni Yellows since it was starting to seem like I'd have to wait several months to receive them. Oh well, I guess I'll just wait until they're in stock and reorder them at a later point

I ordered my set in late May and finally received them last week

Ouch, yeah I don't want to wait that long. Probably for the better though, since I need to do pads and rotors and I should probably get a CP and BOV before my stock CP blows

1and1 · 07-26-2018, 11:51 PM

Upgraded from Beltronics Pro200 to Uniden R1

The Pro200 has served me well, but I just can't deal with the K band static any longer. Could have gone for the R3, but just don't need the GPS around here...

xQx · 07-27-2018, 04:56 AM

Some time ago I removed the fins from my m-sport bumper to give it a more 'open' look, earlier this week I removed a ///M badge and replaced it with a splash of color, and today I removed a month of dirt from my car so I could take these photos.

It's very due for a clay, polish and wax... but that won't be this weekend.

Before & after pictures as follows:

low135 · 07-27-2018, 06:45 AM

Bank put a soft block on my card by 7am

Bought downpipes, xtrons head unit, whiteline inserts, XHP stage 3, MHD stage 2 pack, and paid for a rental car for next week so my buddy can take the car in for wrap. Going to flash XHP while we're doing the muffler delete and 1M rear/quad tips this Sunday.

Super excited to make some big improvements to the car. Anyone going to Mpact east on August 11th at Pocono Raceway?

crowtrobot · 07-27-2018, 08:23 AM

Did a yearly drain/replace of the transmission fluid with Redline D4 ATF. Had parts to replace a weeping selector shaft seal, but I decided to just clean things up and monitor the leak - it's pretty tight in there and I'd rather not risk making things worse if I don't have to.

Name: IMG_20180725_193616.jpg
Views: 259
Size: 52.8 KB

Name: IMG_20180725_193616.jpg
Views: 259
Size: 52.8 KB

YearOneOne · 07-27-2018, 09:19 AM

Quote:

Originally Posted by low135

Bank put a soft block on my card by 7am

Bought downpipes, xtrons head unit, whiteline inserts, XHP stage 3, MHD stage 2 pack, and paid for a rental car for next week so my buddy can take the car in for wrap. Going to flash XHP while we're doing the muffler delete and 1M rear/quad tips this Sunday.

Super excited to make some big improvements to the car. Anyone going to Mpact east on August 11th at Pocono Raceway?

I want to but I think I will have to work. Fingers crossed though

low135 · 07-27-2018, 09:37 AM

Quote:

Originally Posted by YearOneOne

I want to but I think I will have to work. Fingers crossed though

Hope you can make it!

07-26-2018, 07:27 PM	#8412
minirips2 Second Lieutenant 211 Rep 282 Posts Drives: 2010 128i 6M CR Slicktop Join Date: Mar 2017 Location: Illinois iTrader: (1)	I finally got around to wrapping the dull aluminum window trim with dry weave carbon 3M Di Noc vinyl. It's a huge difference visually. I honestly don't know why I waited so long.. Attached Images
	Appreciate 5 varoadking155.00 GoodMoodley239.00 Gangplank1571.50 chris_flies3050.00 Gray_Panther2038.50 Quote

07-26-2018, 08:39 PM	#8413
varoadking King of Goodness 155 Rep 185 Posts Drives: 2012 128i Coupe Join Date: May 2017 Location: Dixie iTrader: (0) Garage List 2012 BMW 128i [0.00]	Well done ^^^^^^^^^^^^^^^^^^^^^
	Appreciate 1 minirips2211.00 Quote

07-26-2018, 08:53 PM	#8414
asiflicious Major 938 Rep 1,021 Posts Drives: 2017 540i Join Date: Aug 2017 Location: Portland, OR iTrader: (0) Garage List 2018 BMW M2 [10.00]	Sad news. Had to cancel my order and get a refun on the Koni Yellows since it was starting to seem like I'd have to wait several months to receive them. Oh well, I guess I'll just wait until they're in stock and reorder them at a later point
	Appreciate 0 Quote

07-26-2018, 11:51 PM	#8421
1and1 Loves me some MHD! 2005 Rep 1,813 Posts Drives: faster than he should... Join Date: Jul 2016 Location: Tally, FL iTrader: (2) Garage List '09 135i [10.00]	Upgraded from Beltronics Pro200 to Uniden R1 The Pro200 has served me well, but I just can't deal with the K band static any longer. Could have gone for the R3, but just don't need the GPS around here... Attached Images __________________ 1and1 (well, I suppose it's "Just1" now...) Sold 135i - E82.N54 2009 BSM - MHD / xHP / DCI, PR CP & 7.5" Race IC / N55 mid & Borla . . WL RSFI, Koni, Eibach & Dinan CP's, M3 CA's / EBC Red's & Firehawk 500's X1 - E84.N20 2013 MGM - JB4 - The Wife's, now with new turbo & ewg
	Appreciate 2 Esteban81312.50 Matticus913628.50 Quote

07-27-2018, 04:56 AM	#8422
xQx General 912 Rep 1,004 Posts Drives: 2008 BMW 135i (E88 N54 6AT) Join Date: Aug 2016 Location: Sunshine Coast QLD Australia iTrader: (0)	Some time ago I removed the fins from my m-sport bumper to give it a more 'open' look, earlier this week I removed a ///M badge and replaced it with a splash of color, and today I removed a month of dirt from my car so I could take these photos. It's very due for a clay, polish and wax... but that won't be this weekend. Before & after pictures as follows: Last edited by xQx; 02-13-2023 at 09:15 PM..
	Appreciate 3 YearOneOne363.50 low1352197.50 Zombie_Head604.50 Quote

07-27-2018, 06:45 AM	#8423
low135 Banned 2198 Rep 1,285 Posts Drives: E88 135i Join Date: Apr 2015 Location: Clearwater iTrader: (0)	Bank put a soft block on my card by 7am Bought downpipes, xtrons head unit, whiteline inserts, XHP stage 3, MHD stage 2 pack, and paid for a rental car for next week so my buddy can take the car in for wrap. Going to flash XHP while we're doing the muffler delete and 1M rear/quad tips this Sunday. Super excited to make some big improvements to the car. Anyone going to Mpact east on August 11th at Pocono Raceway?
	Appreciate 1 Esteban81312.50 Quote

07-27-2018, 08:23 AM	#8424
crowtrobot First Lieutenant 477 Rep 335 Posts Drives: 2008 M3 Join Date: Sep 2015 Location: Philly iTrader: (1)	Did a yearly drain/replace of the transmission fluid with Redline D4 ATF. Had parts to replace a weeping selector shaft seal, but I decided to just clean things up and monitor the leak - it's pretty tight in there and I'd rather not risk making things worse if I don't have to.
	Appreciate 0 Quote