|
|
|
03-23-2017, 04:38 AM | #68 |
Banned
390
Rep 2,186
Posts |
here is one http://datazap.me/u/martymil/log-149...-6-9&zoom=0-68
3rd gear pull, its not a true indicator, but it shows you roughly what it can do A nice drag log would be nice at least it would show us more data |
Appreciate
0
|
03-23-2017, 07:28 AM | #71 |
JDTuning
220
Rep 907
Posts |
If that's the log that I provided to Marty it's a street log and the ambient temp was actually 30c or 86f.
We are planning to put the same car on the dyno again tomorrow to do a few long pulls from 3rd gear into 5th, at a low ramp rate that more closely approximates the slower rate of acceleration you will experience on the street versus the dyno. Of course a street log from a roll in 2nd to the top of 5th would be wonderful but the owner of the car is not particularly interested in losing his license, lol. |
Appreciate
0
|
03-23-2017, 11:34 PM | #72 |
JDTuning
220
Rep 907
Posts |
Ok guys, so here is a datalog recorded on the dyno this morning from 2,000rpm in 3rd gear to 6,700rpm in 5th.
The dyno cell temp was around 32c or 90f and the ramp rate was 150 which sees a longer acceleration time over the usual faster 200 ramp we run at Advan. Thanks, JD. http://datazap.me/u/jd/log-149034746...-4-5-6-9-11-19 P.S. before anyway criticises the use of a dyno log rather than a proper street log, I'm more than happy to arrange for you to drive the car and do 240 clicks whilst I grab some datalogs from the passenger seat, haha. Last edited by JD75; 03-24-2017 at 04:28 AM.. Reason: Revision |
Appreciate
0
|
03-24-2017, 08:26 AM | #77 |
JDTuning
220
Rep 907
Posts |
Here is a road log from one crazy individual, haha.
I'll let the results speak for themselves. http://datazap.me/u/jd/log-149036203...-11&zoom=0-142 |
Appreciate
1
Forced_downunder20.50 |
03-24-2017, 02:50 PM | #78 |
Brigadier General
835
Rep 3,190
Posts |
I think that's the best iat suppression I have seen.
Put that on the other forum. Put it on all forums you should get some buyers. Best I have seen before was ad intercooler and it rises 15-20 at the drags. Or from 0-280ikm 42f rise in 100f ambient. Looks like a winner you have. |
Appreciate
0
|
03-24-2017, 11:24 PM | #80 |
Lieutenant
106
Rep 419
Posts |
Exhaust & waste-gate under way. Closer to finished after adding some Magnaflow 100 cell cats.
__________________
135i - RHD Bottom Mount Single Turbo - GTX3584RS |
Appreciate
1
Forced_downunder20.50 |
03-26-2017, 03:12 AM | #81 | |
Private First Class
6
Rep 107
Posts |
Quote:
|
|
Appreciate
0
|
03-26-2017, 03:35 AM | #82 |
Lieutenant
106
Rep 419
Posts |
The GTX3584RS is a 1000hp ceramic ball-bearing turbo in medium form factor. Latest tech out of Garrett. The motor and trans will blow before we find the turbos limit I would think.
__________________
135i - RHD Bottom Mount Single Turbo - GTX3584RS |
Appreciate
1
Forced_downunder20.50 |
03-26-2017, 04:26 AM | #83 | |
Banned
390
Rep 2,186
Posts |
Quote:
but should be here either mon or tue. I know it will run cooler but how much I cant tell you There is too many variables and temps will be different in every car I can tell you when you have limited airflow at low speeds this ic is superior to the bar and plate design and at high airflow speeds it cant be beat. How much better than yours will depend how much boost you running At low boost settings the temps could be around the same as yours but at high boost is where this ic shines |
|
Appreciate
0
|
04-01-2017, 02:30 AM | #87 |
Private First Class
6
Rep 107
Posts |
So in Aussie HP figures you would say 600-650 Rwhp as American HP figures are off by bout 120-150Hp.
Whats next upgrade for IRS or just go fit a 9" diff live axle |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|