DCT delay fixed

[c1pher]

Originally Posted by SoFloE82

My car has had this issue since the day I bought it. Recently it became worse to a point of it being intolerable. I just happened to flash to the newest version of MHD and reset adaptations (load control, vanos, and throttle) and the car has gotten quite a bit better. It's not perfect, but at least I'm not using the issue as an excuse to trade the car like I was last month.

If you have MHD, I suggest updating the app, flashing the newest maps, then before starting the car reset the above mentioned adaptations. I also let my car sit for 30 minutes after adaptation reset before starting it for good measure. Hope this helps someone.

I had issues from the very first day. I took it back to the dealer as well as tried a number of the solutions posed on the forum. Everything would improve for some time and then the problem would creep back. I suspect that’s why the first owner sold it with low miles. I had every intention of keeping my beautiful 135is but when a Macan Turbo with the options I was looking for became available, I decided to trade her in. Definitely a bittersweet experience. I see another BMW in my future but maybe either with a manual or possibly ZF auto.

[dtla1]

Originally Posted by SoFloE82

My car has had this issue since the day I bought it. Recently it became worse to a point of it being intolerable. I just happened to flash to the newest version of MHD and reset adaptations (load control, vanos, and throttle) and the car has gotten quite a bit better. It's not perfect, but at least I'm not using the issue as an excuse to trade the car like I was last month.

If you have MHD, I suggest updating the app, flashing the newest maps, then before starting the car reset the above mentioned adaptations. I also let my car sit for 30 minutes after adaptation reset before starting it for good measure. Hope this helps someone.

MHD doesn't have the ability to reset the adaptations on the DCT. Try to get that reset using BMW software tools or maybe the protools by Bimmergeeks app can do it?

[SoFloE82]

Originally Posted by dtla1

MHD doesn't have the ability to reset the adaptations on the DCT. Try to get that reset using BMW software tools or maybe the protools by Bimmergeeks app can do it?

The adaptations MHD did allow me to reset has fixed the problem enough for me. I'm good now. Thanks