|
|
|
02-28-2021, 11:36 AM | #1 |
Private First Class
22
Rep 101
Posts |
E88 128i 09 fitment question
Hi All,
Would the following below work for a stock bmw 128i e88? Thanks! REAR WHEELS Diamater: 18" Width: 8.5" Offset: +37mm REAR TIRES Michelin A/S 3+ 235/40/18 FRONT WHEELS Diamater: 18" Width: 8" Offset: +34mm FRONT TIRES Michelin A/S 3+ 235/40/18 |
03-01-2021, 11:40 AM | #2 |
Just one more taste...
566
Rep 2,011
Posts |
Why would you run square tires on staggered wheels? You could get away with 8.5 ET37 square all around.
__________________
My Build Thread: Jet Black 6MT 128i with MSport
|
Appreciate
0
|
03-02-2021, 09:24 AM | #4 |
Just one more taste...
566
Rep 2,011
Posts |
Yes it will fit, very likely without mods or rubbing especially if you’re on stock suspension.
__________________
My Build Thread: Jet Black 6MT 128i with MSport
|
Appreciate
0
|
03-02-2021, 10:01 AM | #5 | |
Just one more taste...
566
Rep 2,011
Posts |
Quote:
For reference, I’m running 8J ET25 fronts and 9J ET38 rears with minor rear roll and slight rubbing on the front.
__________________
My Build Thread: Jet Black 6MT 128i with MSport
|
|
Appreciate
0
|
03-02-2021, 11:58 AM | #6 | ||
Private First Class
22
Rep 101
Posts |
Quote:
|
||
Appreciate
0
|
03-21-2021, 08:18 PM | #7 |
Second Lieutenant
208
Rep 223
Posts |
I wish i could tell you my wheel sizes but they rub. I went to aggressive to get the concave. I also have an e88. Just keep in mind that the verts are heavier in the rear and they rub a lot easier. Stock suspension was crap. I upgraded to BC Coilovers and they rub a lot less but im setup for track use so my stiffness is maxed out and still rub. Ill try and get you my sizes but unfortunately it rubs although it looks good.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|