|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
01-07-2017, 12:49 PM | #1 |
Enlisted Member
1
Rep 33
Posts |
(HELP ASAP) Left rear guide rod B missing bolt (wishbone)
So I recently had my 135i in for service due to a no start issue that was narrowed down to a faulty valvetronic motor and 2 sticking injectors all is replace and car runs fine. I had a knocking noise in the rear going slow over bumps they found out it is completely missing a bolt out of the left rear guide rod which translates to the wishbone? I need a quick fix for this and was wondering if I could piece together a bolt and some washers to fix this temporary so it isn't banging around back there. I can't find the sizes online of the bolt I'd need so if anyone knows that would be awesome. I understand this part of the suspension controls the axle torque from what I read could further damage be caused by this?
__________________
2011 135i M sport DCT / Injen intake, vrsf 3" chargepipe and vrsf 3.5" catless downpipe / JB4 with 40% E85
|
01-07-2017, 05:05 PM | #2 |
Second Lieutenant
27
Rep 240
Posts |
rear suspension
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
135i, bolt missing, suspension, wishbone |
|
|