|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Update on my DIY Oil Change
|
|
09-06-2005, 01:38 PM | #1 |
MAUI BUILT
485
Rep 7,781
Posts
Drives: 2006 330i MT
Join Date: Jun 2005
Location: NORCAL
|
Update on my DIY Oil Change
I completed my oil change this past weekend. Sorry, no pictures. My car had 1301 miles on it when I did the change. I purchased a case of the BMW oil and a BMW oil filter from the dealer. I purchased a strap-wrench and ramps from Sears.
After I drove the car up on the ramps, I opened the oil filler cap to let some heat out for a few minutes while I waited for the oil filter cap to cool down, it gets really hot. Doh!!! I assumed the exposed bolt from underneath the car was the drain plug because at first try, I didn't see the drain bolt behind the panel further back. Like a dummy I loosened it, but fortunatley nothing bad happened and I tightened it back up. Just call me dumbass! The washer on the drain bolt was stuck on the bolt with paint. It appears that the lower part of the block was dipped in paint or protectant. It came off with a little help from a screwdriver. Next, I took off the oil filter cap with the strap wrench. The filter element is wedged in the canister on which the cap is screwed to, but is easy to remove and replace. I soaked up the excess oil at the bottom of the canister with a rag before placing the new filter in. There are two gaskets for the cap that are easy to replace. No mess at all! Real easy. I'm used to japanese cars with the oil filter at the bottom, what a mess! I then filled up with about 6.7 quarts of oil. After I cleaned up everything, I checked the oil level and it read max level. I drove around and after about 100 miles or so, the oil level indicator showed about a 1/4 of a quart low, so I went home and put in the rest of the oil left in the 7th quart assuming that will max it out...wrong, still reads 1/4 low. BTW, the car runs excellent, smoother than before. I'm really glad I did the change as the old oil that drained out had some silver stuff in it! Questions: I'm scared to put any more oil in as I have a total of 7 quarts and do not want to overfill. Could my gauge be acting up? Before I did the oil change, the oil level was always maxed, suddenly when I do the change, it's 1/4 low, problem? And lastly, is there any thing that I reset when the oil is changed? Thanks! Danny
__________________
Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
Last edited by HRC; 09-06-2005 at 01:55 PM.. |
09-06-2005, 02:27 PM | #4 | |
MAUI BUILT
485
Rep 7,781
Posts
Drives: 2006 330i MT
Join Date: Jun 2005
Location: NORCAL
|
Quote:
After I did the oil change, I did not drive it to check, just let it idle for a few minutes...after which it showed full. After that while driving, it showed full. It was the next day while driving that it showed 1/4 low. I then topped it off and drove it for 1/2 hour and it still shows 1/4 low. I'm thinking that I could have burned a little becuase after the change, I took her past 6K rpms twice, but again, not sure. Can the e90 hold a little more than 7 quarts? Danny
__________________
Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
|
|
Appreciate
0
|
09-06-2005, 02:36 PM | #6 |
Moderator
618
Rep 10,855
Posts |
The one thing you really do not want to do is overfill, as that can lead to blowing out seals. I would be getting paranoid. It is very unlikely that revving past 6k would cause the loss of oil. You might have drained more than 6.7 by sopping up the residual in the filter, but I doubt it. Chances are that you are just on the borderline of the 1/4 low detector, and another oz/dl or two would do it. But having already put 7 quarts in I would worry. I assume you have checked everywhere for leaks? At times like this the old dipstick would be comforting. If I were you I might consider taking it in to be checked.
|
Appreciate
0
|
09-06-2005, 02:38 PM | #7 |
Lieutenant General
1312
Rep 10,185
Posts |
Sorry, I dont know quarts
Its supposed to take 6.5Litres on a change ( seems to be around 6.9 quarts ) maybe cleaning out the filter canister causes it to take a little more ( bet a dealer NEVER does that ) If it still shows a bit low you can probably put a bit more in if you want , but dont put in too much, rather a little at a time |
Appreciate
0
|
09-06-2005, 02:42 PM | #8 | |
MAUI BUILT
485
Rep 7,781
Posts
Drives: 2006 330i MT
Join Date: Jun 2005
Location: NORCAL
|
Quote:
I'm glad I did the change. I of course don't know the parts-per-million content of the metal in the oil, but the old oil did have some silver in it. The car now runs and revs smoother, plus with the piece of mind, I recommend it. Danny
__________________
Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
|
|
Appreciate
0
|
09-06-2005, 02:47 PM | #9 | |
MAUI BUILT
485
Rep 7,781
Posts
Drives: 2006 330i MT
Join Date: Jun 2005
Location: NORCAL
|
Quote:
Danny
__________________
Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
|
|
Appreciate
0
|
09-06-2005, 02:49 PM | #10 |
Major General
550
Rep 6,563
Posts |
Did you also look under the car after the oil change? Look at the area around the drain plug to see if oil is slowly leaking or not? make me want to change the oil also but I already have 7000 miles now.
|
Appreciate
0
|
09-06-2005, 03:12 PM | #11 | |
MAUI BUILT
485
Rep 7,781
Posts
Drives: 2006 330i MT
Join Date: Jun 2005
Location: NORCAL
|
Quote:
Danny
__________________
Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
|
|
Appreciate
0
|
09-06-2005, 03:22 PM | #12 |
Moderator
618
Rep 10,855
Posts |
I second Danny's suggestion that you change your oil w/ 7k miles. Anyone know if there is the equivalent of the old magnetic sinks that would collect bits of steel, but that would work with the aluminum and magnesium bits in the N52? While I'm at it, what is the manufacturing process for the block -- do we still have to worry about bits of silica etc. from molds? I know this is anal perfectionism, but hey, we are dealing with a machine that is near-perfection here.
|
Appreciate
0
|
09-06-2005, 03:23 PM | #13 | |
Brigadier General
101
Rep 3,566
Posts
Drives: F30 M-Sport 328i Estoril Blue
Join Date: Jun 2005
Location: Melbourne Australia
|
Quote:
i have forgotten quarts as well. i once saw an american tv show where the presenter said, referring to the USA. "here comes the metric system." can anyone shed some light on that. im just trying to think who it was.... oh yes, that famous and highly respected movie star & tv commercial presenter, Troy McLure. yeah, he said it. any idea when it will be implemented?
__________________
328i M-Sport, Estoril Blue, Carbon XP 35 Tint, front heated seats, black Dakota, Sports Suspension, Anthracite Headliner, HUD, Pro Nav, Sunroof, hk 600w, Bi-Xenon, 19" 403M wheels, Reversing Camera, DAB+, Xenon, BT Ext Connect, MST turbo intake pipe, MST Cold Air Intake, JB4 on Map 2 with Catless DP produces awesome performance in Sport.
|
|
Appreciate
0
|
09-06-2005, 03:31 PM | #14 |
Moderator
618
Rep 10,855
Posts |
When are we going metric? Probably about the same time the 335i and diesels are released in the USA. And we decide that teaching Intelligent Design is a waste of a student's time. Sorry but the logic (?) of some things we do here gets me sometimes.
|
Appreciate
0
|
09-06-2005, 03:42 PM | #15 |
Captain
44
Rep 722
Posts |
Thanks for the helpful post and info. I am at 5,500 miles now and I want to change my oil soon. I wanted to do it at 1,200 miles (Audi maintenance pays for this on newAudis) but I trusted BMW that they know what they are doing. I figured that BMW engine tolerances must be better or something. I was just being naive I guess.
I am fairly certain that it's about money that BMW no longer requires a 1,200 mile service (since they pay for oil changes in the first 4 years), but it's basically good insurance to change the oil on a brand new engine after break-in. I am kicking myself now for not changing it at 1,200 miles. How could there not be some metal particles and/or silica in the engine when it is new? I hope the oil filter on the E90 is really good, and that they use a magnetic drain plug. Let us know how it turns out with the 1/4 low issue please. |
Appreciate
0
|
09-06-2005, 03:49 PM | #16 |
Captain
176
Rep 737
Posts |
Yeah, I don't get it either. Metric is so much more useful and scientific than our "feet" and "gallons" crap.
I think the US decided to switch over to the metric system in the 1970s because there is ONE sign still up somewhere in Minnesota or one of the Dakotas that is exclusively metric, but somehow the idea got shot down and we never converted. I found this page, kinda neat: http://lamar.colostate.edu/~hillger/signs.htm . |
Appreciate
0
|
09-06-2005, 04:06 PM | #17 | |
Lieutenant General
1312
Rep 10,185
Posts |
Quote:
|
|
Appreciate
0
|
09-06-2005, 04:08 PM | #18 | |
Lieutenant General
1312
Rep 10,185
Posts |
Quote:
Nice link for the signs |
|
Appreciate
0
|
09-06-2005, 04:44 PM | #19 |
Captain
176
Rep 737
Posts |
Here in the states, we have to learn at an early age units of measure in our standard English system. Then when we hit high school or college, we have to forget everything we learned about inches and pounds, and re-learn units of measure for the metric system and have all our scientific and mathematical studies based on celsius, mg, mL, and mm.
Why not learn just metric since makes 100x more sense. Not only that, you waste half a semester just trying to learn how to convert inches to meters, and fahrenheit to celsius (even though I think "fahrenheit" is a cooler word ). |
Appreciate
0
|
09-08-2005, 10:56 AM | #21 |
MAUI BUILT
485
Rep 7,781
Posts
Drives: 2006 330i MT
Join Date: Jun 2005
Location: NORCAL
|
Update: I added slightly more oil(less than 1/4 of a quart) on the 6th, drove around and the it still read 1/4 low. I was driving around yesterday and it read full! All is good now.
Side note, I've noticed my gas mileage improving. It used to be 18 or so in the city and 22 or so on the highway, now it's getting around 20/25! The engine is pulling harder and revving alot more freely as the miles go on the clock. The motor is just so smooth and creamy! I now have about 1520 or so. Danny
__________________
Arctic/Blk Leather/Alum.Trim/MT/ZSP/Sunshades/Blk Lines/M3 Illuminated Knob/Alcantara Performance Wheel/M-E-Brake Handle/Euro Fog Switch/Koni Yellows/H&R Sport Springs/19" VMR V718's w/PS2 Tires/M-Tech Body Kit/Carbon Fiber Spoiler/Bimmian Interior Bulbs/OEM Eye Glass Tray/SSK/Alcantara Boot/Split Armrest/OEM Dual Rear Power Outlets/Rear Ashtray Delete/OEM Alum. Pedals/Osram 6000K/Brex Rings/LED Side Markers/BMS Power Box
|
Appreciate
0
|
09-08-2005, 02:44 PM | #22 | |
Captain
26
Rep 679
Posts |
Quote:
I'm specifically looking for the specific ramps you used, as well as tools, etc. |
|
Appreciate
0
|
Bookmarks |
|
|