FS: KW Clubsport Coilovers w/ SWIFT springs & HPA Perches

berns · 07-18-2019, 08:57 AM

SOLD

AndyW · 07-18-2019, 10:33 AM

Interested. Sending PM.

lowside67 · 07-18-2019, 01:32 PM

Did you have them revalved for the increase in spring rates? I am interested if they can be revalved but thought there was some talk about KW no longer allowing for revalves except for rebuilds to factory spec.

Thank you,
Mark

berns · 07-18-2019, 01:43 PM

Quote:

Originally Posted by lowside67

Did you have them revalved for the increase in spring rates? I am interested if they can be revalved but thought there was some talk about KW no longer allowing for revalves except for rebuilds to factory spec.

Thank you,
Mark

They weren't revalved for these spring rates, however these rates are not far off from what they came with from KW. I've spoken to KW directly, and Harold at HP Autoworks and many others have had great success running varying spring rates on these dampers. If we were talking an extreme setup like 700lbs front and 1000lbs rear, I wouldn't advise it, but 450/750 is nothing.

Both my e82 and e90 were sorted, smooth and extremely capable on this setup. I hold platform records (or close) at a few of the tracks out here on this very setup.

lowside67 · 07-18-2019, 08:45 PM

Gotcha. I am aiming to run 600/900 so will take a pass but best of luck on the sale.

Cheers
Mark

berns · 07-18-2019, 09:41 PM

Quote:

Originally Posted by lowside67

Gotcha. I am aiming to run 600/900 so will take a pass but best of luck on the sale.

Cheers
Mark

Quite easy to call KW NA and ask if they could revalve for those rates. 1-800-445-3767

Thanks and best of luck to you either way!

07-18-2019, 08:57 AM	#1
berns Captain 1560 Rep 672 Posts Drives: '07 E90 335i Join Date: Feb 2013 Location: Los Angeles, CA iTrader: (1)	FS: KW Clubsport Coilovers w/ SWIFT springs & HPA Perches SOLD __________________ BRG M3 Clubsport Build 600hp 1M-clone Time Attack build Last edited by berns; 07-31-2019 at 09:59 PM..
	Appreciate 0 Tweet Quote

07-18-2019, 10:33 AM	#2
AndyW Supreme Galactic Commander (one galaxy over...) 666 Rep 1,777 Posts Drives: '08 E93, '12 E82, '13 E93 M3 Join Date: Feb 2012 Location: Washington, USA iTrader: (5)	Interested. Sending PM.
	Appreciate 0 Quote

07-18-2019, 01:32 PM	#3
lowside67 First Lieutenant 219 Rep 361 Posts Drives: 2011 BMW 128i Join Date: Apr 2015 Location: Vancouver, Canada iTrader: (0)	Did you have them revalved for the increase in spring rates? I am interested if they can be revalved but thought there was some talk about KW no longer allowing for revalves except for rebuilds to factory spec. Thank you, Mark __________________ 2011 BMW 128i - Check out my STX build thread!
	Appreciate 0 Quote

07-18-2019, 08:45 PM	#5
lowside67 First Lieutenant 219 Rep 361 Posts Drives: 2011 BMW 128i Join Date: Apr 2015 Location: Vancouver, Canada iTrader: (0)	Gotcha. I am aiming to run 600/900 so will take a pass but best of luck on the sale. Cheers Mark __________________ 2011 BMW 128i - Check out my STX build thread!
	Appreciate 0 Quote