|
|
|
05-19-2020, 12:16 PM | #1 |
Private First Class
54
Rep 106
Posts |
How to: 135i (E82) Front Bumper Removal
Hey everyone,
This is a DIY video on how to remove the front bumper on my 2008 135i. It was a pretty straightforward removal and it allows a lot more access for things like intercooler install, oil cooler installation, etc. The only difficult part was getting the clips undone at each end of the bumper but a trim pry tool made quick work of it once we figured out how to undo the clips. Tools needed: -jack/jack stands -8mm socket -10mm socket -Various socket extensions -T30 Torx bit -Trim pry tool Link to video: Hope this helps! -Eric |
05-20-2020, 04:47 AM | #3 | |
Colonel
8209
Rep 2,250
Posts |
Quote:
It took me about 30 minutes to pull mine...and it was the first time I had pulled a BMW Bumper.
__________________
Everybody has a gameplan....until they get punched in the mouth.
|
|
Appreciate
1
yokomo96354.00 |
05-20-2020, 07:59 AM | #4 | |
Private First Class
54
Rep 106
Posts |
Quote:
It was surprisingly easy once I figured out how to get the clips off. we had just done my buddies M4 bumper the day before and it was much harder than the 135i. |
|
Post Reply |
Bookmarks |
|
|