|
|
|
05-27-2020, 11:16 AM | #1 |
Registered
0
Rep 3
Posts |
Evaporator Core Help
Hey everyone. I am attempting the evaporator core change on my 135i. Cruised along just fine until I got to the crash bar. I have taken out every bolt I see, but the thing won't budge.
The bolts I have removed are: 2 on the end near drive door, and the 1 right below it 2 on the end near passenger door, and 1 behind the glove box 2 on the top of the bar in the center 4 on the mount above the steering column 4 holding the steering column in place 2 at the bottom rails by the transmission tunnel and center console. Does anyone know what I am missing? Thanks in advance |
05-27-2020, 02:03 PM | #2 |
Lieutenant
245
Rep 439
Posts |
https://www.realoem.com/bmw/enUS/sho...diagId=51_6615
Maybe this will help. Also is that a bolt up by the windshield (left half)
__________________
2008 SGM 128i - 3 Stage IM - 130i Tune - Dinan Camber Plates - BMW PE - Injen Intake - 1M Mirrors - LCI Blacklines - M4 Spoiler - Blacked 263's - Aero Bumper - Aero Side Skirts - OMGSplitter - AFE Intake Scoops
|
Appreciate
1
Dackelone10538.50 |
05-29-2020, 11:52 AM | #4 |
Major
785
Rep 1,000
Posts |
This gives me nightmares!
__________________
Official BMWP Whore - BMWP suspension kit w/ M3 arms, BMWP big brake kit, BMWP intake w/Mishimoto tube, BMWP exhaust, BMWP carbon strut brace, BMWP short shifter, and BMWP carbon spoiler. OZ Leggera HLT w/ 245 square setup.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|