BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read




 

Post Reply
 
Thread Tools Search this Thread
      02-13-2019, 02:33 PM   #1
TheMidnightNarwhal
Colonel
TheMidnightNarwhal's Avatar
Canada
607
Rep
2,733
Posts

Drives: 2011 335is 6 speed
Join Date: Jun 2015
Location: Gatineau, Quebec

iTrader: (0)

Hello 1M community. I have a 335is but I've been told my front end is quite similar and piratically the same as my engine is the N54T as well. So I'm looking if anyone else had this happen and what solution they have taken.

Our cars have a coolant hose that runs from passenger to driver about mid level in terms of height into the auxiliary radiator in the driver side fender. It's secured in place (to not move and crash into the belt or fan I guess) by 3 clips. The clips are mounted on the fan shroud.

Here is the broken clip (the glue stuff is epoxy I tried, but it didn't work)


Part number of the held hose to the fan shroud via clips. Notice it is a one piece to the lower rad hose.
17127602294



As you can see in blue, those clips seem to come with the hose. But those clips I did not break.

I broke the clip that would be where the red circle is, so it means it seems that the clip doesn't come with the hose.

I then looked up the part for the radiator fan shroud and nothing there. I also share the same fan a 1M.

Called my dealer over the phone over 30 mins and they tried really hard but could not locate a PN or prucahsable replacement clip.

So now I am SOL. But I mustn't be the only who had issues with this clip or remove the rad fine because of that hose. Anyone else or found a good solution? Like I can still the car but I'm not flooring it since it's winter. But this summer and once the engine mounts wear a bit I think it could potentially become an issue if it's not secured in place.
Appreciate 0
      02-13-2019, 03:32 PM   #2
ayao
Thread killer
384
Rep
1,655
Posts

Drives: 1M
Join Date: Aug 2011
Location: CA

iTrader: (2)

These probably aren't exactly right but they have a similar appearance:
64216918118
13311738201

Look at this post and the attached .pdf: https://www.e90post.com/forums/showp...48&postcount=4

It looks like it is Part "F" in the PPK retrofit kit.

Last edited by ayao; 02-13-2019 at 03:47 PM.
Appreciate 1
      02-13-2019, 04:19 PM   #3
TheMidnightNarwhal
Colonel
TheMidnightNarwhal's Avatar
Canada
607
Rep
2,733
Posts

Drives: 2011 335is 6 speed
Join Date: Jun 2015
Location: Gatineau, Quebec

iTrader: (0)

Quote:
Originally Posted by ayao View Post
These probably aren't exactly right but they have a similar appearance:
64216918118
13311738201

Look at this post and the attached .pdf: https://www.e90post.com/forums/showp...48&postcount=4

It looks like it is Part "F" in the PPK retrofit kit.
Yeah 1st 2 PN were recommended to me but they're not exactly it and I don't think they will be held in place well in the shroud.

Ahhhhhh yes there we go it would be F. Altough mine is at a 90 degree angle I'm sure would work perfectly fine as well as in the pdf you linked it shows to use part F. That is exactly it. But there is no actual part number in the doc damn. I feel like I'm so close haha.

I google part numbers for the retrofit kit and can't find sub-part numbers under there either for the hose clip hmmm.

Appreciate 0
      02-13-2019, 04:47 PM   #4
ayao
Thread killer
384
Rep
1,655
Posts

Drives: 1M
Join Date: Aug 2011
Location: CA

iTrader: (2)

Slightly closer. The answer is probably out there somewhere...
https://www.1addicts.com/forums/show...1005490&page=1
Appreciate 0
      02-13-2019, 04:50 PM   #5
Dackelone
European Editor
Dackelone's Avatar
Germany
8505
Rep
22,671
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

Arrow Schlauchhalter...

Perhaps the elusive hose clamp holder is this one?...



p/n 64216918118 (#9 in the bottom right corner)



Name:  coolant hose t holder    diag_3bgg.jpg
Views: 61
Size:  76.0 KB

http://www.realoem.com/bmw/enUS/show...77#64216918118




I think I would just go to a dealer with a print out of your PPK aux cooler & hose... and see what they can come up for you.

Good Luck
Dackel
__________________
Appreciate 0
      02-13-2019, 04:56 PM   #6
TheMidnightNarwhal
Colonel
TheMidnightNarwhal's Avatar
Canada
607
Rep
2,733
Posts

Drives: 2011 335is 6 speed
Join Date: Jun 2015
Location: Gatineau, Quebec

iTrader: (0)

Quote:
Originally Posted by ayao View Post
Slightly closer. The answer is probably out there somewhere...
https://www.1addicts.com/forums/show...1005490&page=1


Quote:
Originally Posted by Dackelone View Post
Perhaps the elusive hose clamp holder is this one?...



p/n 64216918118 (#9 in the bottom right corner)



Attachment 1990526

http://www.realoem.com/bmw/enUS/show...77#64216918118




I think I would just go to a dealer with a print out of your PPK aux cooler & hose... and see what they can come up for you.

Good Luck
Dackel
https://www.1addicts.com/forums/newr...ply&p=24376745

Hold on I just realised how simillar the ends that grip on to the cooler hoses that PN is.

But it's werid that PN doesn't have any place or connector that indicates it would sit into a radiator shroud. As if it's missing my broken piece in my pic.
Appreciate 0
      02-13-2019, 04:57 PM   #7
Dackelone
European Editor
Dackelone's Avatar
Germany
8505
Rep
22,671
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

I found these PPK pics that might help you at your dealership...


Name:  PPK  bmw_m_performance_power_kit_stage2_125.jpg
Views: 54
Size:  53.6 KB

Name:  ppk2  b.jpg
Views: 54
Size:  49.3 KB

Name:  ppk2 s.jpg
Views: 55
Size:  46.5 KB

Name:  ppk BMW-Performance-Power-KitVersion2.jpg
Views: 54
Size:  117.8 KB
Attached Images
File Type: pdf power_kit_installation_instr.pdf (2.91 MB, 10 views)
__________________
Appreciate 0
      02-13-2019, 05:07 PM   #8
TheMidnightNarwhal
Colonel
TheMidnightNarwhal's Avatar
Canada
607
Rep
2,733
Posts

Drives: 2011 335is 6 speed
Join Date: Jun 2015
Location: Gatineau, Quebec

iTrader: (0)

Quote:
Originally Posted by Dackelone View Post
I found these PPK pics that might help you at your dealership...
Quote:
Originally Posted by ayao View Post
Slightly closer. The answer is probably out there somewhere...
https://www.1addicts.com/forums/show...1005490&page=1
Holy shit guys I think I've got it!!! Not exactly the same but it's the same as those that are used on the ends of the hose for sure! so just doesn't have a 90 degree under grip to it. Should still do! Thanks ayao I followed your thread link and someone posted the invoice of PN he got from the dealer!

It's not even listed under 335is this is so stupid it's only under 335d and the 1M I think.

PN 13537708472

Appreciate 1
Dackelone8504.50

      02-13-2019, 05:32 PM   #9
Dackelone
European Editor
Dackelone's Avatar
Germany
8505
Rep
22,671
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

Quote:
Originally Posted by TheMidnightNarwhal View Post
Holy shit guys I think I've got it!!!...

It's not even listed under 335is this is so stupid it's only under 335d and the 1M I think.

PN 13537708472
Cool!

Yeah that HD radiator fan was taken from the 335d and used in the 1M and 335is.

Dackel
__________________
Appreciate 0
      02-13-2019, 06:35 PM   #10
TheMidnightNarwhal
Colonel
TheMidnightNarwhal's Avatar
Canada
607
Rep
2,733
Posts

Drives: 2011 335is 6 speed
Join Date: Jun 2015
Location: Gatineau, Quebec

iTrader: (0)

Quote:
Originally Posted by Dackelone View Post
Cool!

Yeah that HD radiator fan was taken from the 335d and used in the 1M and 335is.

Dackel
Ahh ok.

But still realoem should show them for my car.

Notice how it doesn't even show the lower radiator hose WITH the aux hose going into the aux rad? Originally I had no idea what hose it was on my car because I was just looking at the diagram lol.
Appreciate 1
Dackelone8504.50

Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 07:41 AM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST