|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
01-07-2019, 06:39 PM | #1 |
Private First Class
46
Rep 192
Posts |
2012 N55 Electronic issues after driving in hard rain..Please help!!!
Hello everyone,
So I just started experiencing some issues this weekend after driving my car through some recent rare rainy weather in Socal and starting experiencing some weird issues with my ABS and basically all my lights (run lamps, turn signal, hazard, dome lights etc. This is all started when I first started losing my ABS and brakes were locking up, no lights or any warnings yet. Then the very next day while driving in the freeway all my warning lights came on and a I got a message about driver assist malfunction or something close to that telling me to stop driving the car and take to the dealer immediately. But the car itself was running perfectly normal aside from all the warnings and lights and did not feel at all like it was in limp mode. I get home and do not drive again until the very next morning. So this morning I start the car and everything is back normal again with no warnings, no ABS light all the same as before all the issues started. I get to work and Park thinking maybe the problem fixed itself until I take my car to go get gas on my lunch break and now the Red brake light warning stays on with hand brake released of course along with the ABS light and traction warning light and maintenance required light. I tried to check system controls on Idrive to see what warning or malfunction is going on but the screen is blank. The Cars seems to run fine and does not feel like its in limp mode but my headlights, turn signals, hazard lights and check control systems all do not work. While the car is running, My interior dome lights now stay on even with all the doors completely closed and when I lock and unlock the car I also noticed the beeping noise to let you know your locked/unlocked stopped as well. I'm not sure if any of these problems are related but I'm pretty dumfounded at this point and just hoping anyone might have experienced these symptoms or issues in the past. I have the Carly APP and will run later when I get home but need to update my software but just hoping I could get any input based on these symptoms. Please help! Thank you
__________________
12 135i: DINAN S3, ARM 7" FMIC, MADDAD MIDPIPES, REMUS EXHAUST, INJEN INTAKE, ARM CP
|
01-07-2019, 07:53 PM | #2 |
Sideways and Smiling
3027
Rep 2,860
Posts
Drives: In Exuberance
Join Date: Mar 2017
Location: Rosamond, CA USA
|
Sounds like the Footwell module got wet, and probably because of clogged sunroof drains. It controls things like lights, mirrors, and windows.
__________________
2012 BMW 328i 6-Speed Wagon | Deep Sea Blue with Grey Dakota Leather | Manual Swap, 330i Intake + Tune, 3.15 Helical LSD, Öhlins R&T
(SOLD) 2009 BMW 128i 6-Speed Coupé | Monaco Blue with Black Sensatec | chris_flies' 128i thread |
Appreciate
1
elitesales305383.00 |
01-07-2019, 07:54 PM | #3 |
C2H5OH
3915
Rep 2,144
Posts |
Sounds like kinda random stuff, lights are an unrelated system to ABS, other than being on the same side of the car, but the iDrive stuff is in the rear.
So I'm going with, battery failing. May get lucky and just need a good charge. But I'd say new is a fair bet. |
Appreciate
0
|
01-07-2019, 07:57 PM | #4 |
Brigadier General
1541
Rep 3,071
Posts |
The footwell module = FRM. There was a recall or partial recall on it recently on some models. Could be that, or possibly a bad IBS or low battery? Just guessing here. Pull the codes with Carly & see what comes up.
__________________
2011 135i w/ DCT | ZSP Sport Pkg | PPK | Ohlins R
|
Appreciate
0
|
01-07-2019, 07:59 PM | #5 |
Private First Class
46
Rep 192
Posts |
If that module is damaged from the rain, would that cause the electrical system malfunction message? I'm assuming yes and that is the message that is staying on now. My lights and everything else working fine now but ABS, traction light and red brake light remain on.
__________________
12 135i: DINAN S3, ARM 7" FMIC, MADDAD MIDPIPES, REMUS EXHAUST, INJEN INTAKE, ARM CP
|
Appreciate
0
|
01-07-2019, 08:01 PM | #6 | |
Private First Class
46
Rep 192
Posts |
Quote:
__________________
12 135i: DINAN S3, ARM 7" FMIC, MADDAD MIDPIPES, REMUS EXHAUST, INJEN INTAKE, ARM CP
|
|
Appreciate
0
|
01-07-2019, 08:06 PM | #7 |
Second Lieutenant
116
Rep 264
Posts |
Sounds like the tire pressure module or “RDC” under the car got wet. It’s pretty common for water to get in and short out the CAN bus. First thing I would do is unplug it and see if it happens again.
|
Appreciate
1
MightyMouseTech4337.50 |
01-08-2019, 12:36 PM | #8 |
Private First Class
46
Rep 192
Posts |
Is it possible for this Module to fail intermittently? I ask this because my car was again back to normal this morning on my way to work, No lights, warnings and my check control system says everything is "A" okay now. Not sure how long this will last but I will definitely try unplugging this just to see If I notice the same systems from when it was failing. Very bizarre issue but I guess its not that uncommon for our cars.
__________________
12 135i: DINAN S3, ARM 7" FMIC, MADDAD MIDPIPES, REMUS EXHAUST, INJEN INTAKE, ARM CP
|
Appreciate
0
|
01-08-2019, 01:08 PM | #9 |
Second Lieutenant
116
Rep 264
Posts |
Yes it can fail intermittently. If someone were to scan the car there are probably some K-CAN faults present in the system, and if you unplug the RDC module they should go away.
|
Appreciate
1
MightyMouseTech4337.50 |
01-08-2019, 01:48 PM | #10 |
Private First Class
46
Rep 192
Posts |
Got it, I really appreciate this info. This will be the next test I do once I search where the module is located.
__________________
12 135i: DINAN S3, ARM 7" FMIC, MADDAD MIDPIPES, REMUS EXHAUST, INJEN INTAKE, ARM CP
|
Appreciate
0
|
01-08-2019, 02:24 PM | #11 |
Brigadier General
5150
Rep 3,241
Posts |
Your symptoms are very similar to mine including the iDrive screen going blank with the addition of my entire gauge cluster going dead. The car still drove fine when all of this was happening. And after what seemed to be an eternity, everything came back as normal.
My issue was the junction box in the trunk was under water. What ever it is, there is a high probability something is under water. My BMW tech friend said it's more common than you think with regards to modules shorting out due to water collecting in the various wells in the trunk. He said he usually drills a hole in the trunk floor after replacing the module to minimize the risk of it happening again. |
Appreciate
0
|
01-08-2019, 02:38 PM | #12 | |
Private First Class
46
Rep 192
Posts |
Quote:
__________________
12 135i: DINAN S3, ARM 7" FMIC, MADDAD MIDPIPES, REMUS EXHAUST, INJEN INTAKE, ARM CP
|
|
Appreciate
0
|
01-08-2019, 05:27 PM | #13 |
Private First Class
46
Rep 192
Posts |
Okay so I went out to my car on my lunch break to see if the warning lights came back but everything still normal again except now I got a battery discharging when the car is parked message. My question now is would these malfunctioning modules cause a drain to my battery while the car is off? or could this possibly be a new issue I'm running into with something draining the battery while the car is parked?
__________________
12 135i: DINAN S3, ARM 7" FMIC, MADDAD MIDPIPES, REMUS EXHAUST, INJEN INTAKE, ARM CP
|
Appreciate
0
|
01-11-2019, 02:40 PM | #14 |
Private First Class
46
Rep 192
Posts |
So just to update on my issue, its been about 3 days now and it looks like whatever module that was malfunctioning somehow fixed itself, or I'm assuming maybe whatever water or moisture that was causing this has gone away because now its like nothing ever happened. I'm still going to check out the modules everyone pointed out and unplug them to see if I get a similar reaction and just so I know where they are at next time this happens.
ZX10GUY, Just curious do you happen to have any pics of where to drill in the trunk floor? I want to do this as well and hopefully will prevent this in the future. Also have you seen the issue come back at all since it went away for you? or did you end up replacing the module?
__________________
12 135i: DINAN S3, ARM 7" FMIC, MADDAD MIDPIPES, REMUS EXHAUST, INJEN INTAKE, ARM CP
|
Appreciate
0
|
01-11-2019, 04:59 PM | #15 |
Second Lieutenant
32
Rep 209
Posts |
This thread may help you regarding water in the trunk and how to stop it. I've personally had issues with my RDC and PGS modules.
water in boot https://www.1addicts.com/forums/showthread.php?t=728301 |
Appreciate
1
KRAMCLASSIC45.50 |
01-11-2019, 11:06 PM | #16 | |
Brigadier General
5150
Rep 3,241
Posts |
Quote:
My issue has not come back since when everything went hay wire. Yes, the junction box was replaced by the dealer. I suspect the cause was the dealer's body shop. I had the car at the dealer body shop to paint my rear bumper after a minor mishap. The dealer couldn't figure out where the water came from to saturate the junction box. So they just warranteed the repair and was going to figure out if the charges would be submitted to BMW for reimbursement or the body shop would have to pick up the tab. |
|
Appreciate
0
|
01-12-2019, 07:09 AM | #17 | ||
Major General
4338
Rep 6,196
Posts |
Quote:
|
||
Appreciate
0
|
01-12-2019, 08:26 AM | #18 |
Second Lieutenant
32
Rep 209
Posts |
The tail light gaskets are really finicky. They are supposed to be replaced every time they are removed. Good news is you can DIY very easily.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|