|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
04-13-2018, 05:47 PM | #1 |
General
2038
Rep 25,989
Posts |
Vmr V801 - You Spoke, We Listened – Limited Run, Pre-order Forum Special!
VMR V801 - YOU SPOKE, WE LISTENED – LIMITED RUN, PRE-ORDER FORUM SPECIAL! Generally we recommend 8.5 ET45 / 9.5 ET45-58 for the 1-Series platform. This spec works well for most, but some individuals have been requesting the 19" ET50 rear fitment for the 1er. You spoke, we listened! We currently have a 5 SET LIMITED RUN of our V801 in Anthracite Metallic being produced in the BMW 1-Series specialized fitment of 19x8.5 ET43 / 19x9.5 ET50. This fitment is ideal for those looking to run a wider tire and/or less aggressive fit than our typical 1er fitment. These wheels are compatible with all 1-series trims/model - 128i and 135i Pre-orders for this specialized 1-Series fitment are OPEN with a fully refundable 50% deposit. If at any point you wish to cancel the order before our shipment arrives, this deposit will be returned to your card in full – No “cancellation fee” or anything like that. V801 Anthracite Metallic 19x8.5 ET43 5x120 72.6 @ $340 V801 Anthracite Metallic 19x9.5 ET50 5x120 72.6 @ $340 Total: $1360 + $99 Shipping within Continental US Pre-orders placed NOW through MAY 31 are eligible for FREE SHIPPING. Contact me at 714-442-7916 x108 or via email @ brandon@velocitymotoring.com to reserve your set! Tire packages are available as well, mounted & road-force balanced in-house prior to shipping. BMW 1-Series V801 Fitment – 19x8.5 ET43 / 19x9.5 ET50 Spots 1) (Available) 2) (Available) 3) (Available) 4) (Available) 5) (Available) The flow formed V801 is our newest design that has proven a great match for the 1-Series platform both in terms of performance and appearance. The flow formed manufacturing process provides reduced weight and increased performance while the full face mesh styling stays true to modern BMW design language. **The photos below show what the V801 looks like on the 1-series platform in our 18" 1 Series fitment along with the 19" fitment on a 2 Series. Please note the fitment offered in this thread is 2mm more aggressive in front. This won't have any negative impact on fitment, although it does offer a tad more inner clearance than the ET45.**
__________________
VMR|Wheels | 714.442.7916 |
sales@velocitymotoring.com | www.velocitymotoring.com | facebook | flickr | Instagram |
05-04-2018, 05:08 PM | #2 |
General
2038
Rep 25,989
Posts |
Can't decide between our premium finishes? Why not run both? @joshb2448 (IG) couldn't either, so he decided to run both on his E82! V801's seen here in Titanium Black Shadow (passenger) and Mercury Black Metallic (driver).
__________________
VMR|Wheels | 714.442.7916 |
sales@velocitymotoring.com | www.velocitymotoring.com | facebook | flickr | Instagram |
Appreciate
0
|
05-31-2018, 03:38 PM | #3 |
General
2038
Rep 25,989
Posts |
V801's spotted in our booth at Bimmerfest this past weekend! Thanks to everyone who stopped by the booth to grab some swag!
__________________
VMR|Wheels | 714.442.7916 |
sales@velocitymotoring.com | www.velocitymotoring.com | facebook | flickr | Instagram |
Appreciate
0
|
06-06-2018, 12:17 PM | #4 |
General
2038
Rep 25,989
Posts |
Modified F32 on Anthracite Metallic V801. Check out @roxy_f32 on IG!
__________________
VMR|Wheels | 714.442.7916 |
sales@velocitymotoring.com | www.velocitymotoring.com | facebook | flickr | Instagram |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|