Help, Cornering bulb socket

[dbiker207]

I have been getting ccid 380 and 381 for faulty cornering lights. I believe that they are the h3 bulbs under the little cover on the top of the headlight assembly. When I took them apart to inspect i found lots of damage to the socket and bulb from arcing and i broke the drivers side one because it was stuck in the housing. I would like to order new bulb sockets but cant seem to find the part number. Can someone point me in the right direction? The only one I can find that looks correct says its for 2011 and newer...

I have a 2009 135i with adaptive xenon lights.

[HIPSI]

I had this issue on my daughters 09 128 and had to replace the entire headlight housing $$

[suspenceful]

Is this the bulb you're talking about?

http://www.1addicts.com/forums/showthread.php?t=1002590

Part number: 63126940665

Or buy it on ECS: https://www.ecstuning.com/ES172889/

[chris82]

Originally Posted by dbiker207

I have been getting ccid 380 and 381 for faulty cornering lights. I believe that they are the h3 bulbs under the little cover on the top of the headlight assembly. When I took them apart to inspect i found lots of damage to the socket and bulb from arcing and i broke the drivers side one because it was stuck in the housing. I would like to order new bulb sockets but cant seem to find the part number. Can someone point me in the right direction? The only one I can find that looks correct says its for 2011 and newer...

I have a 2009 135i with adaptive xenon lights.

I just put in new stock headlamps but unfortunately they didn't have the turn signal socket. I bought 2 of them (They're cheaper from eBay due to free shipping). The part nr posted above is correct, and they are the same for both sides. I only managed to get my left side installed though; my right side is being a little bitch. I have it in correctly and lined up, but it only turns about 2 mm to the right and it needs to turn another 3 or 4 for it to lock in and work. Anyways, good luck