|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
01-19-2011, 08:09 PM | #1 |
Lieutenant
99
Rep 443
Posts |
✚WHEELSTO | New Product Release - WORK Wheel S1 R & M1 R Meister
1Addicts,
We here at WheelSTO are proud to announce the release of the new WORK Wheels Meister S1-R & M1-R for BMW 5x120 PCD. You might be familiar with the original, cult classic Work Meister S1. The original S1's were spun cast barrel with a cast face available in riveted 3 piece or the 2 piece construction. WORK Wheels have decided to cut the weight down and make the Meister into a competitive 2 piece track wheel. The new WORK Meister S1 R/M1 R was born. WORK Meister R series uses a two piece construction wheel. They have modernized the center disk to a more updated look while saving as much weight as possible without sacrificing the wheel strength while utilizing their patented low pressure cast center disk with a spun forged step rim barrel. Sizing: 18" Sizing only at the moment Sizing ranging from 18 x 8.5 ~ 11.5 wide. Offset increments in (1mm) for a precise specification Construction: Low pressure cast center disk with a spun Forged step rim barrel. Disk Type: (A) Disk for standard, larger factory calipers. (R) Disk for Big brake clearance. (O) Disk for Maximum lip, less brake clearance or smaller brakes. Weights: 18 x 9 ~ approximately 22 lbs 18 x 10 ~ approximately 23 lbs Colors/Finish available: Matte Bronze Anodized Barrel - S1R Feinheit Silver II - S1R Matte Black (MBL) - S1R Bright Buff Finish (BBF) - S1R Matte Bronze Anodized Barrel - M1R Feinheit Silver II - M1R Matte Black (MBL) - M1R Platinum Gold (PG) - M1R |
10-17-2011, 04:14 PM | #8 |
Slo'est E90 around
36
Rep 300
Posts |
Had VS-XX on a previous EVO IX back in 06-08, work makes awesome wheels.
Can you PM me details on price shipped to 80239, also size you would recommend for the most agressive offset front and rear without using a spacer. Don't mind running hubcentric rings, just don't want a spacer and don't want to roll fenders. Matte Black (MBL) - S1R 18" |
Appreciate
0
|
10-17-2011, 05:05 PM | #9 |
aka 1013MM
1243
Rep 9,545
Posts |
what disk would be need for 135i brakes?
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|