E82 N55 DCT Service/Repair Manual

[Genes1s]

Recently acquired 2011 135I DCT with 97K (from this forum actually). Already found a few things that need to be addressed.

Wondering what service/repair manual do you guys use? I've used Bentley for my E36 M3/4/5 but couldn't find one for this E82 platform. Do you guys just do E90 Bentley then? Have you had any experience with this.
https://www.emanualonline.com/Cars/B...BoC6fMQAvD_BwE

Planning to do:
1. Coolant level sensor.
2. DCT complete service with gasket (leak).
3. Rear Diff service (sweating).
4. Refreshed all rubbers and bushings.

Thanks

[dtla1]

I would say most people either used DIY's here/e90post, or used NewTis.info (until it was shut down late last week.

Seems like the best bet is going to be getting setup with ISTA+ and whatever other BMW software tools you can get your hands on. Check BimmerGeeks downloads section for a good starting place or look around the forums. The first post here https://www.e90post.com/forums/showthread.php?t=1764856 and a few subsequent posts can get you started on ISTA I think. I'll be getting myself setup this afternoon i think too.

[Genes1s]

Originally Posted by dtla1

I would say most people either used DIY's here/e90post, or used NewTis.info (until it was shut down late last week.

Seems like the best bet is going to be getting setup with ISTA+ and whatever other BMW software tools you can get your hands on. Check BimmerGeeks downloads section for a good starting place or look around the forums. The first post here https://www.e90post.com/forums/showthread.php?t=1764856 and a few subsequent posts can get you started on ISTA I think. I'll be getting myself setup this afternoon i think too.

Yeah, I think its probably worth getting it along with INPA and NCSExpert as well..