|
|
|
11-06-2021, 02:40 PM | #1 |
Colonel
530
Rep 2,083
Posts |
Switched 12V Source Near EKP Module
Anyone know if there is an ignition switched 12v source in the wiring near the EKP fuel pump module? I'm putting a cooling fan on my module and need a constant voltage source that is switched. Prefer not to use the output wires to the pump for 2 reasons. First is that this is a PWM 12V so the average voltage to the fan is lower, meaning it won't run at full speed. And second, this increases the load on the EKP module, further exacerbating the overheating issue. Yes it's only add 0.08A, but there's got to be a better voltage source.
__________________
2013 135is DCT Carbon Black Metallic |
Post Reply |
Bookmarks |
|
|