Are rear control arms direct fit?

[chichicastenango]

I have the opportunity to buy an M3 set for relatively cheap, so I was wondering if it's worth just buying the remaining parts and installing it as an "upgrade".

Was curious which control arms WON'T FIT my 128i 2008 - is it all accept for the Camber Link Arm? Lower purple in the image below.



Are the others direct bolt and then alignment?

[dtla1]

Typical Upgrade kits only include the Wishbone and Guide Rods (as well as the ABS sensor bracket) https://www.ecstuning.com/b-trw-part...3322283547kt4/.

I don't think all of the rest of them are direct bolt on, but might want to check out fe1rx thread to refresh on that.

[chichicastenango]

Originally Posted by dtla1

Typical Upgrade kits only include the Wishbone and Guide Rods (as well as the ABS sensor bracket) https://www.ecstuning.com/b-trw-part...3322283547kt4/.

I don't think all of the rest of them are direct bolt on, but might want to check out fe1rx thread to refresh on that.

Ya, I read his thread, but it was unclear, unless I can't read right.

Would you know the factory part number for these two parts?