|
|
|
04-09-2022, 03:43 PM | #1 |
Captain
1055
Rep 783
Posts
Drives: 2010 328ix E91, 2011 128i E82
Join Date: Feb 2018
Location: Delaware
|
TPMS Inactive after New Wheels/tires/sensors
Car is a 2011 128i and had been running the stock wheels. I just put new wheels, tires, and new sensors (from FCP Euro, HUF-RDE012V21) and am getting the TPMS Inactive warning. I tried the reset/relearn procedure using the B/C button but it just tells me that the system is inactive. I used my scanner to reset the codes and it then told me that the system was active again but after driving a short distance, I got the Inactive warning again.
I thought these sensors were pre-programmed and would be plug-and-play but, apparently, not so much. I have a Schwaben/Foxwell scanner and also Carly but am not knowledgeable about or experienced with the various apps (ISTA, INPA, etc. - I lose track of all the acronym names of these apps) so suggestions to "just code it with (insert name of app here)" are not really helpful. I need more basic help than that. I've been poking around the Interwebs trying to figure this out but not getting much. I see references to "activating" the new sensors rather than "programming" them but never clear how to do this. Any helpful wisdom out there?
__________________
K9Leader 2010 328i x-Drive, E91 - Space Gray/Black 2011 128i E82 6MT - Crimson Red/Black |
04-09-2022, 04:22 PM | #2 |
Brigadier General
2459
Rep 3,585
Posts |
Kind of sounds like the wrong sensors. Maybe the shipped the wrong ones, or maybe your car build date was just on the early side of the change?
|
Appreciate
0
|
04-09-2022, 06:09 PM | #3 | |
Captain
1055
Rep 783
Posts
Drives: 2010 328ix E91, 2011 128i E82
Join Date: Feb 2018
Location: Delaware
|
Quote:
__________________
K9Leader 2010 328i x-Drive, E91 - Space Gray/Black 2011 128i E82 6MT - Crimson Red/Black |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|