10" Rear wheel on a 135i?

FOACAD · 03-11-2012, 12:02 PM

Ok, i searched some and couldnt come up with much, so ill ask here.

I am looking at forgestar f14s and realllllly like the way thee 10" deep concave looks over the 9.5" semi concave.

So is it possible with no fender rolling, on stock everything to run a 10" rear? What ET would it need to be? And what would be the max tire size that could fit back there?

Bahraini135 · 03-11-2012, 04:06 PM

18x10 at the rears, no rubbing on stock fenders. et51

FOACAD · 03-11-2012, 04:59 PM

What is the tire size?

Eyeman · 03-11-2012, 06:28 PM

The way I just read it, the deep concaves come in 9.5" et 42 or 10" et 44 max. Both with require a little work to get them to fit without some rubbing. In my mind you may was well get the 9.5" since that should stick out around 4mm less and the tires are gonna have to be stretched either way, much more so on the 10".

If you are really worried about rubbiing, get the semi-concave at a 50 or so offset. If the deep concave looks that much better to you then just realize you may have to tweak/stretch a little to keep from rubbing. You never really have to roll, it's just one of the options.

bogart · 03-12-2012, 12:02 PM

I'm running BBS 10-inch wheel ET50 with a 10mm spacer, making it ET40. I have 255/35 tires. I rub a little bit on the fender liner and inner fender lip. I cut out some of the fender liner and did a slight roll and pull. Still rub a tad. However, I'm slammed on KW V2, and suspension is set as hard as possible too. Either way, it can definitely be done.

Bahraini135 · 03-12-2012, 12:49 PM

Quote:

Originally Posted by FOACAD

What is the tire size?

255/35 with no issues

ptack · 03-12-2012, 01:27 PM

You might find a 10" wheel with the right offset, but you're probably going to be limited to a 255 tire unless you want to do extra work. Keep in mind that unless you copy exactly what someone else has done, you're doing an experiment that could get pretty expensive because there are a lot a variables here. If that's not what you want to do stick with a narrower wheel. It will be cheaper and fit a 255 tire better.

MikeCOUPE · 03-12-2012, 05:28 PM

I was wondering if these would fit by any chance?
18x8.5 6.25"BS et38
18x10 6" BS et12

Everfly · 03-12-2012, 06:40 PM

Quote:

Originally Posted by MikeCOUPE

I was wondering if these would fit by any chance?
18x8.5 6.25"BS et38
18x10 6" BS et12

On the 1er is NO, for the Z3 M YES

MikeCOUPE · 03-12-2012, 07:34 PM

Damn I wanted to take the wheels off my brothers Z3MC for a little while

damn lol

Everfly · 03-12-2012, 07:44 PM

Quote:

Originally Posted by MikeCOUPE

Damn I wanted to take the wheels off my brothers Z3MC for a little while

damn lol

Very odds ET. It only fit Z3M, u can always take those off and trade for different set

MikeCOUPE · 03-12-2012, 07:56 PM

Quote:

Originally Posted by Everfly

Very odds ET. It only fit Z3M, u can always take those off and trade for different set

Nah his car is at the shop undergoing a turbo build so I figured I would take his wheels until he was done.. So much for that idea lol

03-11-2012, 12:02 PM	#1
FOACAD Airborne! 19 Rep 533 Posts Drives: 2012 AW/CR 135i Msport Join Date: Nov 2011 Location: KC, MO iTrader: (0)	10" Rear wheel on a 135i? Ok, i searched some and couldnt come up with much, so ill ask here. I am looking at forgestar f14s and realllllly like the way thee 10" deep concave looks over the 9.5" semi concave. So is it possible with no fender rolling, on stock everything to run a 10" rear? What ET would it need to be? And what would be the max tire size that could fit back there?
	Appreciate 0 Tweet Quote

03-11-2012, 04:06 PM	#2
Bahraini135 First Lieutenant 28 Rep 340 Posts Drives: 09 M-Packaged 135i Join Date: Sep 2008 iTrader: (0) Garage List 2009 11.85@116.4mph ... [10.00]	18x10 at the rears, no rubbing on stock fenders. et51 __________________ '73 240z Triple-Carbed '03 350z Supercharged '09 135i Twin-Turbocharged *11.85@116.4mph*
	Appreciate 0 Quote

03-11-2012, 04:59 PM	#3
FOACAD Airborne! 19 Rep 533 Posts Drives: 2012 AW/CR 135i Msport Join Date: Nov 2011 Location: KC, MO iTrader: (0)	What is the tire size?
	Appreciate 0 Quote

03-11-2012, 06:28 PM	#4
Eyeman Colonel 121 Rep 2,037 Posts Drives: 2008 135 blk, blk, step Join Date: Jan 2009 Location: Atlanta, GA iTrader: (0) Garage List 1994 Porsche 968 Cab [0.00] 2017 AMG GTS [0.00] 1994 Porsche 968 Coupe [0.00] 1977 Mercedes 450SE ... [0.00] 2008 135 [8.00]	The way I just read it, the deep concaves come in 9.5" et 42 or 10" et 44 max. Both with require a little work to get them to fit without some rubbing. In my mind you may was well get the 9.5" since that should stick out around 4mm less and the tires are gonna have to be stretched either way, much more so on the 10". If you are really worried about rubbiing, get the semi-concave at a 50 or so offset. If the deep concave looks that much better to you then just realize you may have to tweak/stretch a little to keep from rubbing. You never really have to roll, it's just one of the options. __________________ Injen, RR OCC, MadDad Whisper, donut spare, 19x8.5et43fr 19x9.5et45r Volk LE37's, rear fenders rolled/pulled, PSS4S 225/35fr 255/30r, KW V1's, AR coated catless dps, Cross strutbar, CF grills and license plate holder, iCarbon diffuser, ETS black anodized FMIC, M3 control arms, Quaife, ER chargepipe, ForgeDV's, Topspeed Custom Tune, V3sims, Braille, Andrey_GTA rear hub mod, Ebay Mstyle front bumper and performance style side skirts.
	Appreciate 0 Quote

03-12-2012, 12:02 PM	#5
bogart Lieutenant Colonel 116 Rep 1,664 Posts Drives: E82 N55 DCT Join Date: Nov 2010 Location: STL, MO iTrader: (4) Garage List 2011 BMW 135i [7.06]	I'm running BBS 10-inch wheel ET50 with a 10mm spacer, making it ET40. I have 255/35 tires. I rub a little bit on the fender liner and inner fender lip. I cut out some of the fender liner and did a slight roll and pull. Still rub a tad. However, I'm slammed on KW V2, and suspension is set as hard as possible too. Either way, it can definitely be done. __________________
	Appreciate 0 Quote

03-12-2012, 01:27 PM	#7
ptack Brigadier General 269 Rep 4,470 Posts Drives: 135i Join Date: May 2008 Location: NJ iTrader: (0) Garage List 2008 135i [6.50]	You might find a 10" wheel with the right offset, but you're probably going to be limited to a 255 tire unless you want to do extra work. Keep in mind that unless you copy exactly what someone else has done, you're doing an experiment that could get pretty expensive because there are a lot a variables here. If that's not what you want to do stick with a narrower wheel. It will be cheaper and fit a 255 tire better. __________________ 135i, SGM, Coral, Sport Package, Auto, Premium Hifi, USB/ipod, Apex EC-7s, PPK Stage II
	Appreciate 0 Quote

03-12-2012, 05:28 PM	#8
MikeCOUPE Private First Class 7 Rep 124 Posts Drives: Z4M Coupe, E46 M3 Join Date: Jan 2012 Location: Miami/NOLA iTrader: (0)	I was wondering if these would fit by any chance? 18x8.5 6.25"BS et38 18x10 6" BS et12 __________________ Gen IV Viper -- 135i -- FBO Cobb Stg2+ -- E46 M3 -- Z4 M Coupe CTS-V -- Gone -- AP2 S2000 -- Gone -- AP1 S2000 -- Gone
	Appreciate 0 Quote

03-12-2012, 07:34 PM	#10
MikeCOUPE Private First Class 7 Rep 124 Posts Drives: Z4M Coupe, E46 M3 Join Date: Jan 2012 Location: Miami/NOLA iTrader: (0)	Damn I wanted to take the wheels off my brothers Z3MC for a little while damn lol __________________ Gen IV Viper -- 135i -- FBO Cobb Stg2+ -- E46 M3 -- Z4 M Coupe CTS-V -- Gone -- AP2 S2000 -- Gone -- AP1 S2000 -- Gone
	Appreciate 0 Quote