HELP!!! jb4 stag2 n55

[feche]

hello, i bought the car yesterday and this morning i want to put the jb4 than i bought, i saw all videos in Youtube and tutorial on burguer but i dont know how to install this part, can somebody help me???

this is my jb4

https://drive.google.com/file/d/0B5p...ew?usp=sharing

ando i dont know how to conect this part!!!!
https://drive.google.com/file/d/0B5p...ew?usp=sharing

i really need help,

THANKKKKS!

[BoosTonian]

http://www.burgertuning.com/instructions/n55_stage1.pdf

And go to page 10. That will show you how to install this. It's essentially the grounding wires as well as CAN connectors.

[feche]

Originally Posted by BoosTonian

http://www.burgertuning.com/instructions/n55_stage1.pdf

And go to page 10. That will show you how to install this. It's essentially the grounding wires as well as CAN connectors.

in this part shows how to conect the regular wires, this from the another little box, are never show

[BoosTonian]

Originally Posted by feche

in this part shows how to conect the regular wires, this from the another little box, are never show

The big red wire and the black wire closest to the top connect first

The red wire requires you remove the 50 amp fuse in the dme. Put the red wire into where the fuse was, then push the 50 amp fuse back into it.

The black wire needs to be grounded at the ground point next to the dme on the strut tower.

For the green and red wires towards the bottom of the pic you posted, those are the wires that you are going to splice into the CAN wires. Look at page 14-17 to see which wires to splice those into.