BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      04-28-2020, 03:16 PM   #1783
Gambeez
Private
24
Rep
61
Posts

Drives: 2013 128i M-Sport
Join Date: Mar 2019
Location: Indianapolis, IN

iTrader: (0)

2013 M-Sport 128i.

Finally getting around to doing modifications after many things breaking at once. VC+gasket replaced, all new brakes, radiator replaced + hoses, plugs & coils replaced. It’s been an expensive year thankfully I was able to do all these myself. Recently installed some Depo V2s, 1M bumper, and lip. Waiting for rear 1M bumper to be painted and installing in a couple of days. Hopefully my black lines will show up sometime May and will be swapping out the halogen tail lights. From there I hope to get a custom quad exhaust and install headers + 3 stage intake. So long as nothing else breaks on er’ *knocks on wood*

Initially wasn’t happy with this style of 1M bumper (there are two version I found out after I got it painted). This one is more like the M3 instead of the 1M. But the eBay lip really tied it all together.






Last edited by Gambeez; 05-22-2020 at 11:20 PM..
Appreciate 3
1and11547.00
Esteban4304.00

      04-30-2020, 11:07 AM   #1784
Esteban
Major General
Esteban's Avatar
United_States
4304
Rep
6,571
Posts

Drives: VW GLI
Join Date: Jun 2014
Location: The Golden State

iTrader: (0)

Good looking 1er.
Appreciate 0
      04-30-2020, 04:47 PM   #1785
Gambeez
Private
24
Rep
61
Posts

Drives: 2013 128i M-Sport
Join Date: Mar 2019
Location: Indianapolis, IN

iTrader: (0)

Quote:
Originally Posted by Esteban View Post
Good looking 1er.
Thank you!

1M rear bumper just got home from the shop. Had the diffuser painted gloss black to match the rest of the gloss black trim. Really canít wait to put this sucker on tomorrow but unfortunately the weather is awful where I live today.

Pictures inbound tomorrow after install and possibly getting the quad exhaust done.
Appreciate 0
      04-30-2020, 06:33 PM   #1786
Boosted135i
Private
Boosted135i's Avatar
United_States
41
Rep
67
Posts

Drives: 2009 135i
Join Date: Jan 2016
Location: des moines ia

iTrader: (0)

Quarantine Sunday

Wrapped the roof in Satin Black plus the 2 sections you see on the front bumper.
Also wrapped the horrible chrome trim in Gloss black and finished off with a quick tint on the side markers/turning signals
Attached Images
   
__________________
#TeamPicketts 2009 135i
VRSF DCI
VRSF Charge Pipe w/ HKS SSQV BOV
VRSF 5? Intercooler w/ VRSF lower charge pipe
VRSF Catless DP?s
Appreciate 2
      05-03-2020, 11:20 AM   #1787
kaputt
Lieutenant
533
Rep
530
Posts

Drives: 128i 6MT
Join Date: Sep 2013
Location: TX -> CA

iTrader: (1)

Fresh wash
Attached Images
 
Appreciate 3
1and11547.00
Esteban4304.00

      05-03-2020, 01:13 PM   #1788
1and1
Loves me some MHD!
1and1's Avatar
United_States
1547
Rep
1,459
Posts

Drives: faster than he should...
Join Date: Jul 2016
Location: Tally, FL

iTrader: (1)

Garage List
'09 135i  [5.00]
Always love the Space Gray
__________________
1and1
135i - E82.N54 2009 BSM - MHD / xHP / DCI, PR CP & 7.5" Race IC / N55 mid & Borla
. . WL RSFI, Koni, Eibach & Dinan CP's, M3 CA's / EBC Red's & Firehawk 500's
X1 - E84.N20 2013 MGM - JB4 - The Wife's
Appreciate 1
kaputt533.00

      05-05-2020, 03:46 PM   #1789
gotcha43
130i Performonster
gotcha43's Avatar
Germany
130
Rep
79
Posts

Drives: 2009 E82 130i Performance
Join Date: Apr 2014
Location: Germany, Lower-Saxony

iTrader: (0)

Garage List
2009 BMW 125i  [0.00]
Short drive
Attached Images
 
Appreciate 3
      05-05-2020, 06:08 PM   #1790
christofis135i
Memberberry
christofis135i's Avatar
United_States
221
Rep
269
Posts

Drives: 2011 135i White/Red
Join Date: Jul 2017
Location: Michigan

iTrader: (0)

Corona drive
Attached Images
  
Appreciate 0
      05-05-2020, 06:45 PM   #1791
elitesales305
shmo
elitesales305's Avatar
United_States
356
Rep
1,031
Posts

Drives: honda
Join Date: May 2017
Location: no where

iTrader: (0)

😬
Attached Images
 
__________________
No sig
Appreciate 0
      05-06-2020, 05:05 AM   #1792
bobowar135
Private First Class
bobowar135's Avatar
Australia
257
Rep
138
Posts

Drives: 08' Sedona Red 135i 6MT
Join Date: Jun 2019
Location: Dark Side of the Moon

iTrader: (0)

Quote:
Originally Posted by Suprgnat View Post
Hanging out in the garage.
Can you get that bonnet any shinier?
Appreciate 1
Suprgnat1290.00

      05-06-2020, 05:08 AM   #1793
bobowar135
Private First Class
bobowar135's Avatar
Australia
257
Rep
138
Posts

Drives: 08' Sedona Red 135i 6MT
Join Date: Jun 2019
Location: Dark Side of the Moon

iTrader: (0)

Quote:
Originally Posted by Boosted135i View Post
Wrapped the roof in Satin Black plus the 2 sections you see on the front bumper.
Also wrapped the horrible chrome trim in Gloss black and finished off with a quick tint on the side markers/turning signals
Once again, I love that colour.
Appreciate 0
      05-06-2020, 11:38 AM   #1794
yokomo963
Private
44
Rep
98
Posts

Drives: 135i
Join Date: Mar 2020
Location: greensboro, nc

iTrader: (2)

2008 135i - sparkling graphite metallic
Took the track car out today on double duty for a quarantine grocery trip haha.
Attached Images
 
Appreciate 1
      05-06-2020, 02:27 PM   #1795
wantmymoneyincash
Private
3
Rep
55
Posts

Drives: 2013 135is
Join Date: Jan 2020
Location: CT

iTrader: (0)

Quote:
Originally Posted by Gambeez View Post
2013 M-Sport 128i.

Finally getting around to doing modifications after many things breaking at once. VC+gasket replaced, all new brakes, radiator replaced + hoses, plugs & coils replaced. It’s been an expensive year thankfully I was able to do all these myself. Recently installed some Depo V2s, 1M bumper, and lip. Waiting for rear 1M bumper to be painted and installing in a couple of days. Hopefully my black lines will show up sometime May and will be swapping out the halogen tail lights. From there I hope to get a custom quad exhaust and install headers + 3 stage intake. So long as nothing else breaks on er’ *knocks on wood*

Initially wasn’t happy with this style of 1M bumper (there are two version I found out after I got it painted). This one is more like the M3 instead of the 1M. But the eBay lip really tied it all together.





Sweet ride. How does that front lip fit? was thinking about this one, but yours looks way more aggressive. Wheel and tire specs?https://www.ebay.com/itm/16179387671...chn=ps&lpid=82
Appreciate 0
      05-07-2020, 09:15 PM   #1796
triggergt
Private
United_States
20
Rep
67
Posts

Drives: 2013 135i M package
Join Date: Oct 2008
Location: NE Ohio

iTrader: (0)

Had to get out for a little ride

Name:  20200507_182620.jpg
Views: 324
Size:  496.2 KB
Appreciate 1
      05-10-2020, 06:36 AM   #1797
FredrikM
New Member
FredrikM's Avatar
Sweden
15
Rep
29
Posts

Drives: Jet Black 125iC (272 HP)
Join Date: Feb 2014
Location: Sweden

iTrader: (0)

My 125i.





__________________
2011 125iC - M Chassis - Sport leather seats - Xenon - PDC - Light package
Appreciate 4
      05-12-2020, 10:23 AM   #1798
FredrikM
New Member
FredrikM's Avatar
Sweden
15
Rep
29
Posts

Drives: Jet Black 125iC (272 HP)
Join Date: Feb 2014
Location: Sweden

iTrader: (0)

Quote:
Originally Posted by gotcha43 View Post
Short drive
I love the performance front, do you know anyone in Germany who sells them? They seem to be discontinued at BMW, so i'll guess i have to find a used one or a replica.
__________________
2011 125iC - M Chassis - Sport leather seats - Xenon - PDC - Light package
Appreciate 0
      05-12-2020, 02:39 PM   #1799
Gambeez
Private
24
Rep
61
Posts

Drives: 2013 128i M-Sport
Join Date: Mar 2019
Location: Indianapolis, IN

iTrader: (0)

Quote:
Originally Posted by wantmymoneyincash View Post
Sweet ride. How does that front lip fit? was thinking about this one, but yours looks way more aggressive. Wheel and tire specs?https://www.ebay.com/itm/16179387671...chn=ps&lpid=82
Sorry for the late reply.

Lip is decent. Itís actually for the 1M and didnít realize when I ordered it. But it was only 180 and poly. It also fit up minus the sides so I took a heat gun and remolded the fitment in those areas. Some spots itís off but hardly noticeable unless youíre up close to it. I like it since the 1M rep I purchased didnít sit as low as others do so it gave my car a more lowered look. Overall Iím pretty happy with the looks of it and how it changed the look of the front end.

Tires are Continental DWS Extreme Contact. 18s 215/40 fronts 235/45 rears on Motegi wheels, I believe MR147. Iím not 100% since they came with the car when I purchased it. Iíve meant to swap them for some VMRs but waiting to have to replace the tires since the wheels and tires were brand new when I bought it. Probably will do that at the end of the year since the tires will be heading out by then.
Appreciate 0
      05-12-2020, 03:01 PM   #1800
wantmymoneyincash
Private
3
Rep
55
Posts

Drives: 2013 135is
Join Date: Jan 2020
Location: CT

iTrader: (0)

Quote:
Originally Posted by Gambeez View Post
Sorry for the late reply.

Lip is decent. Itís actually for the 1M and didnít realize when I ordered it. But it was only 180 and poly. It also fit up minus the sides so I took a heat gun and remolded the fitment in those areas. Some spots itís off but hardly noticeable unless youíre up close to it. I like it since the 1M rep I purchased didnít sit as low as others do so it gave my car a more lowered look. Overall Iím pretty happy with the looks of it and how it changed the look of the front end.

Tires are Continental DWS Extreme Contact. 18s 215/40 fronts 235/45 rears on Motegi wheels, I believe MR147. Iím not 100% since they came with the car when I purchased it. Iíve meant to swap them for some VMRs but waiting to have to replace the tires since the wheels and tires were brand new when I bought it. Probably will do that at the end of the year since the tires will be heading out by then.
Nice, I purchased the same bumper you have because I hated the 1m rep that sat too low. I felt like it through the whole proportions off imo did not like the look. But that lip looks so sick, might go after one of them.

Looking for new rims and tires too. Looking at ec7s possibly. I want some concave but its hard to find lol
Appreciate 0
      05-13-2020, 10:38 AM   #1801
Gambeez
Private
24
Rep
61
Posts

Drives: 2013 128i M-Sport
Join Date: Mar 2019
Location: Indianapolis, IN

iTrader: (0)

Quote:
Originally Posted by wantmymoneyincash View Post
Nice, I purchased the same bumper you have because I hated the 1m rep that sat too low. I felt like it through the whole proportions off imo did not like the look. But that lip looks so sick, might go after one of them.

Looking for new rims and tires too. Looking at ec7s possibly. I want some concave but its hard to find lol
I recommend the lip highly. Cheap and don't have to worry about it breaking since it's PPU. Like I said, just have a heat gun and remold the sides where it flares out to the bumper and your solid.

Unfortunately I need to pick up a new one, I'm in no rush. But I some how forgot to install screws in the middle to support it. Just the other day on the highway it got loose and started dragging. It maintained it's shape but the paint scrapped off and has some rash on one side of it. Thankfully I didn't professionally paint it since I was aware something like this could happen and didn't want to drop 150-250 on a professional paint on a lip. But still looks decent, in no rush since I'm more worried about getting my quad tip exhaust finished (hopefully next week) and getting my 3 stage intake and tune completed.



Those would look nice! Concave or flat, that style of wheel looks great on our cars. I cannot wait to pick up a new set even though the Motegi's on it are decent. The girl loves them at least but they've gotten some curb rash from me not paying attention while parallel parking it.
Appreciate 0
      05-13-2020, 12:28 PM   #1802
wantmymoneyincash
Private
3
Rep
55
Posts

Drives: 2013 135is
Join Date: Jan 2020
Location: CT

iTrader: (0)

Quote:
Originally Posted by Gambeez View Post
I recommend the lip highly. Cheap and don't have to worry about it breaking since it's PPU. Like I said, just have a heat gun and remold the sides where it flares out to the bumper and your solid.

Unfortunately I need to pick up a new one, I'm in no rush. But I some how forgot to install screws in the middle to support it. Just the other day on the highway it got loose and started dragging. It maintained it's shape but the paint scrapped off and has some rash on one side of it. Thankfully I didn't professionally paint it since I was aware something like this could happen and didn't want to drop 150-250 on a professional paint on a lip. But still looks decent, in no rush since I'm more worried about getting my quad tip exhaust finished (hopefully next week) and getting my 3 stage intake and tune completed.



Those would look nice! Concave or flat, that style of wheel looks great on our cars. I cannot wait to pick up a new set even though the Motegi's on it are decent. The girl loves them at least but they've gotten some curb rash from me not paying attention while parallel parking it.
Was just thinking the fitment of the lip might be off because the 1M bumper is wider than the 1M rep for the 135. Maybe there is one I can find that is for the 1M rep. Or jus do what you did lol.

Quad tip is going to look awesome man, I got the Remus quad and I love the look.

Never thought the fitment of wheels and tires on this car would drive me up a wall lol. I think im looking at 18x8.5 +35 and 18x9.5 +45 . 235/40 255/35
Appreciate 0
      05-19-2020, 02:42 PM   #1803
iminhell1
C2H5OH
iminhell1's Avatar
United_States
1698
Rep
1,805
Posts

Drives: 2010 SG 135i auto
Join Date: May 2015
Location: Darwin, MN

iTrader: (1)

circa 2018
Attached Images
 
__________________
FBO (RB EVO inlets, Phoenix Racing 7.5" race, CP-e relocate / Tial, 1320 DP's, Berk mids, Custom E tune, XHP Stg III)
11.480 @ 121, 3,600#
2020: Speedtech, BW S366, 7.5"race, VTT DBBL, 2x450's, PR coils, Berk mids, E85
Appreciate 1
Afam28145.50

      05-19-2020, 02:48 PM   #1804
iminhell1
C2H5OH
iminhell1's Avatar
United_States
1698
Rep
1,805
Posts

Drives: 2010 SG 135i auto
Join Date: May 2015
Location: Darwin, MN

iTrader: (1)

2018
Attached Images
 
__________________
FBO (RB EVO inlets, Phoenix Racing 7.5" race, CP-e relocate / Tial, 1320 DP's, Berk mids, Custom E tune, XHP Stg III)
11.480 @ 121, 3,600#
2020: Speedtech, BW S366, 7.5"race, VTT DBBL, 2x450's, PR coils, Berk mids, E85
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:28 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST