BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read




 

Post Reply
 
Thread Tools Search this Thread
      03-21-2017, 04:32 PM   #397
buddalun
Lieutenant Colonel
buddalun's Avatar
United_States
543
Rep
1,778
Posts

Drives: '12 ZCP M3 & 911
Join Date: Dec 2014
Location: USA

iTrader: (7)

I found this:

"BMW's newest TwinPower Turbo engine oil is LL01 FE+ certified. It meets BMW's standards for LongLife 2001 ("LL01") and improved fuel economy ("FE+"). The new 0W30 replaces the previous 5W30 oil used in some 4-cylinder, 6-cylinder, and V8 BMW models. As of December 2015, BMW has not backdated the 0W30 for any other engines but the LL01 rating might indicate it will be the new approved oil for most engines (and replace #83212365946 5W30 oil).

Beginning with July 2015 production, new models came with 0W20 or 0W30 BMW oil. However, BMW dealerships continued to sell 5W30 until that stock was depleted. The 5W30 is an acceptable alternative to the 0W20 and 0W30 BMW oil per BMW's service bulletin.

0W30 oil is to be released in 2016.
"
Appreciate 2
Dackelone7943.50
mtl8828.00

      03-21-2017, 10:20 PM   #398
buddalun
Lieutenant Colonel
buddalun's Avatar
United_States
543
Rep
1,778
Posts

Drives: '12 ZCP M3 & 911
Join Date: Dec 2014
Location: USA

iTrader: (7)

FWIW, I am sticking with Redline 5W-30 in my 1M.
Appreciate 1
Dackelone7943.50

      05-14-2018, 03:18 PM   #399
crumbelieve
New Member
1
Rep
29
Posts

Drives: 1M
Join Date: Aug 2011
Location: NYC

iTrader: (0)

Quote:
Originally Posted by vasmir View Post
Dealership telling me BMW 0W-30 replaced the 5W-30 back in the Fall of 2016, and is now their recommended oil for the N54. Service advisors were fully aware of the specific 1M fluids/needs.

BMW 0W-30 Twinpower Longlife Synthetic Oil

New part number: 83-21-2-450-384

As a side note... still no airbag recall parts! (sad face).
Quote:
Originally Posted by buddalun View Post
So the 0W is now recommended for our 1Ms?

Did the dealer provide any insight as to why BMW made the change to the 0W oil? TIA
I just had my oil changed at the dealer and and also received Oil part # 83-21-2-450-384 (LL-01 FE 0W-30) - I was skeptical and worried but the parts department insisted this was correct and that BMW periodically updates parts. Seeing this thread makes me feel better.

However, nobody seems to have mentioned changes in the Oil Filter parts: I received 11-42-7-953-129. ECS tuning shows that it fits N54/55 3.0L engines (https://www.ecstuning.com/b-genuine-...e/11427953129/) but didn't see anyone commenting on this. Anyone else have this issue?

Thanks and hope everyone is still enjoying their 1Ms as much as I am!

Last edited by crumbelieve; 05-14-2018 at 03:39 PM.
Appreciate 0
      05-15-2018, 02:51 PM   #400
///BYU
First Lieutenant
///BYU's Avatar
United_States
82
Rep
386
Posts

Drives: AW 1M
Join Date: Aug 2011
Location: Salt Lake City, UT

iTrader: (1)

Quote:
Originally Posted by crumbelieve View Post
I just had my oil changed at the dealer and and also received Oil part # 83-21-2-450-384 (LL-01 FE 0W-30) - I was skeptical and worried but the parts department insisted this was correct and that BMW periodically updates parts. Seeing this thread makes me feel better.

However, nobody seems to have mentioned changes in the Oil Filter parts: I received 11-42-7-953-129. ECS tuning shows that it fits N54/55 3.0L engines (https://www.ecstuning.com/b-genuine-...e/11427953129/) but didn't see anyone commenting on this. Anyone else have this issue?

Thanks and hope everyone is still enjoying their 1Ms as much as I am!
11-42-7-953-129 is the new part number for the oil filter. realoem and getbmwparts both show this as superseding / replacing 11-42-7-541-827, 11-42-7-566-327, and 11-42-8-683-196.
Appreciate 1
      05-25-2018, 11:05 AM   #401
drivergadgets
New Member
3
Rep
5
Posts

Drives: Ford Ranger 2016
Join Date: May 2018
Location: California

iTrader: (0)

my SA said there are 5 ltrs of lt5 in the whole US or something.
Appreciate 0
      05-25-2018, 05:30 PM   #402
Dackelone
European Editor
Dackelone's Avatar
Germany
7944
Rep
22,386
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

Arrow p/n 11427953129 new oil filter part number...

Quote:
Originally Posted by crumbelieve View Post
I just had my oil changed at the dealer and and also received Oil part # 83-21-2-450-384 (LL-01 FE 0W-30) - I was skeptical and worried but the parts department insisted this was correct and that BMW periodically updates parts. Seeing this thread makes me feel better.

However, nobody seems to have mentioned changes in the Oil Filter parts: I received 11-42-7-953-129. ECS tuning shows that it fits N54/55 3.0L engines (https://www.ecstuning.com/b-genuine-...e/11427953129/) but didn't see anyone commenting on this. Anyone else have this issue?

Thanks and hope everyone is still enjoying their 1Ms as much as I am!
I guess you missed this thread of mine...



Recent DIY oil change... PA or AL... What the heck does this mean?
https://www.1addicts.com/forums/show....php?t=1383391


Name:  oil filters new vs old bmw N54  20170516_160148.jpg
Views: 99
Size:  120.9 KB


as per RealOEM.com ...

Part Cross-reference

p/n 11427953129

Set oil-filter element

From:06/01/2017To:-Price:
Supersedes:
11428683196 (09/01/2016 — 09/21/2017), Exchangeable retrospectively 11427566327 (02/13/2006 — 01/30/2017), Exchangeable retrospectively 11427541827 (09/01/2004 — 03/17/2006)


Part 11427953129 was found on the following vehicles:
1' E81   (02/2006 — 12/2011)
1' E87   (03/2005 — 02/2007)

http://www.realoem.com/bmw/enUS/partxref?q=11427953129
__________________
Appreciate 0
      06-13-2018, 02:38 PM   #403
bbnks2
Captain
407
Rep
911
Posts

Drives: 135i N55
Join Date: Jan 2017
Location: NY

iTrader: (0)

Quote:
Originally Posted by T1M View Post
Alright official word from redline, DCTF is a more suitable substitute for MTF-LT-5 aka Pentosin FFL-3 than either D4 or D6.


Attachment 1319866

specs...
https://www.redlineoil.com/product.aspx?pid=146&pcid=9
I think D4 and D6 contain low levels of friction modifiers as marketed by Redline when they say this fluid has "superior synchronizer performance." The low friction synchros in an N55/1M 45bz box specifically states not to use friction modified fluid in the gearbox.

Shifting was worse for me in my N55 when switching to a D6/MTl mix and 2nd gear synchro started grinding on me at 100k. Seemed like there was too much slip and gears weren't aligning fast enough for quick shifts.

I put straight D4 in my replacement N55 box and it doesn't seem much better. Stock fluid felt best. I think I am going to drain and fill with FFL-3 for piece of mind since this is the OE equivalent fluid that presumably contains a different add-pak then Redline's ATF oriented formulas. The only thing D6 and FFl-3 have in common is the the viscosity is relatively close in the cSt 6.x range. That doesn't say ANYTHING as to what kind of friction modifiers may or may not be added to each product...

I will point out that even if the formula of the Redline DCTF fluid is better suited for use in an N55/1M box, the viscosity is actually much higher then FFL-3. It has a viscosity rating of 8.x cSt. That lands it between the viscosity range of their D4 ATF and MTL fluid and is 2 points higher than OE BMW and FFL-3. I'd expect worse cold start performance out of the DCTF fluid. This is important to me as I daily drive in the New England area.
__________________
135i: E30 map by TwistedTuning, VRSF DP, Kerscher +15mm fenders, Kosei K8R 255/40/17, M3 control arms, UUC trans mounts, DV+, Whiteline RSFB, 5" intercooler, Charge Pipe, PC925 (23lb), UUC SSK, YCW Coilovers 6k/16k, Monroe shock mounts, Diff lockdown, Catch Can, N20 TMAP, 335is clutch, SMFW, 034 engine mounts, M3 Steering rack

Last edited by bbnks2; 06-13-2018 at 02:45 PM.
Appreciate 0
      06-13-2018, 04:21 PM   #404
Dackelone
European Editor
Dackelone's Avatar
Germany
7944
Rep
22,386
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

Quote:
Originally Posted by bbnks2 View Post
I think D4 and D6 contain low levels of friction modifiers as marketed by Redline when they say this fluid has "superior synchronizer performance." The low friction synchros in an N55/1M 45bz box specifically states not to use friction modified fluid in the gearbox...
Once you have grinding of your gears/syncro's... no fluid is gonna help. Sometime's some fluids may cover up the problem... but on a fast hard shift... your gonna get a grind. I can remember using BG's Syncro Shift in past cars... it does cover up worn syncro's - but like I said on a quick shift it will still grind.

All I can say is contact Redine Oils and see which fluid they recommend. I am still using their AFT-D4 in my 135i with 155K kms with no issues. I drive hard on the Autobahns but I don't ever speed shift my gear. Shift quickly, but I don't bang my gears and tear out my motor mounts when shifting.

I have tried Redline's MTL, but I feel that it's quick thicker on cold starts in the winter. In the summer I can't tell/feel any difference.

This thread reminds me I need to change my fluids(trans and diff) again on my next oil change.

Dackel
__________________
Appreciate 0
      07-16-2018, 02:32 PM   #405
jaymcars
Private First Class
jaymcars's Avatar
United_States
38
Rep
197
Posts

Drives: 2011 1M
Join Date: Mar 2010
Location: Florida

iTrader: (0)

Safe to assume after reading through this slightly unclear thread that....



TwinPower 0W-30 is current CORRECT for oil change for a 1m with 27,000 miles on her??
__________________
'08 M5 BSM/Black 6MT- GONE; '03 M3 Jet Black/Black, 6MT- GONE; '03 M5 Carbon Black/Silverstone, GONE; '11 e90 M3, LMB/Ext Black, 6MT- GONE '11 e93 M3, LMB/Ext Black, DCT- GONE; '11 1M BSM/Black, '17 M2 Long Beach Blue/Black, 6MT; '11 1M Valencia Orange/Black
Appreciate 0
      07-16-2018, 05:48 PM   #406
Dackelone
European Editor
Dackelone's Avatar
Germany
7944
Rep
22,386
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

Quote:
Originally Posted by jaymcars View Post
Safe to assume after reading through this slightly unclear thread that....



TwinPower 0W-30 is current CORRECT for oil change for a 1m with 27,000 miles on her??
Yep. Any oil that carries a LL1 or LL4 rating and that is: 0w30, 0w40, 5w30 and 3w40 viscosity is fine to use.

IF you don't live in a cold climate... I would go with TwinPower 5w30 instead of 0w30.

Dackel
__________________
Appreciate 0
      07-16-2018, 09:48 PM   #407
jaymcars
Private First Class
jaymcars's Avatar
United_States
38
Rep
197
Posts

Drives: 2011 1M
Join Date: Mar 2010
Location: Florida

iTrader: (0)

Quote:
Originally Posted by Dackelone View Post
Quote:
Originally Posted by jaymcars View Post
Safe to assume after reading through this slightly unclear thread that....



TwinPower 0W-30 is current CORRECT for oil change for a 1m with 27,000 miles on her??
Yep. Any oil that carries a LL1 or LL4 rating and that is: 0w30, 0w40, 5w30 and 3w40 viscosity is fine to use.

IF you don't live in a cold climate... I would go with TwinPower 5w30 instead of 0w30.

Dackel
Thanks Dackel... it gave me a warning that says "oil at min level please add 1 quart" which I did today of 5w30 and it still says same warning.

I drove it a few miles to see if it would go off. No luck yet. Maybe I need to add more oil
__________________
'08 M5 BSM/Black 6MT- GONE; '03 M3 Jet Black/Black, 6MT- GONE; '03 M5 Carbon Black/Silverstone, GONE; '11 e90 M3, LMB/Ext Black, 6MT- GONE '11 e93 M3, LMB/Ext Black, DCT- GONE; '11 1M BSM/Black, '17 M2 Long Beach Blue/Black, 6MT; '11 1M Valencia Orange/Black
Appreciate 0
      07-17-2018, 05:59 AM   #408
Dackelone
European Editor
Dackelone's Avatar
Germany
7944
Rep
22,386
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

Quote:
Originally Posted by jaymcars View Post
Thanks Dackel... it gave me a warning that says "oil at min level please add 1 quart" which I did today of 5w30 and it still says same warning.

I drove it a few miles to see if it would go off. No luck yet. Maybe I need to add more oil
Drive the car for at least 45 minutes... then see what the oil level says.

IF you do a lot of very short drives... the oil level sensor will not read correctly bc of the high water content in the oil. Go for a long drive and recheck.

Or... just change your oil and then you will KNOW the oil level is correct. You could have a bad oil sensor too. Do you have a code reader like BMW Carly ? You could check for codes that way.

Dack
__________________
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 04:57 PM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST