BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read




 

Post Reply
 
Thread Tools Search this Thread
      01-15-2019, 10:35 PM   #1
BadakVT
Registered
BadakVT's Avatar
12
Rep
4
Posts

Drives: 2012 BMW 1M AW
Join Date: Nov 2018
Location: -

iTrader: (0)

Upgrading BOV Vacuum Line to 1/4" ID

Hi guys, just wanted to share a non-drilling method to upgrade to a full 1/4" vacuum line to your BOV.

Had to replace my blown OE chargepipe (only 9000km) and decided to go with VRSF +TIAL kit. After reading the forum, I decided to run 1/4" line to eliminate potential problems with surging, etc.

I bought a N20 boost/vacuum adaptor from eBay ($25) and it fits securely on the intake manifold MAP sensor. The vacuum nipple is larger than the stock one, allowing you to secure 1/4" ID silicone line directly (no need to use the brass reducer). The vacuum line can easily be secured with a small clamp or zip tie.

The only modification was to replace the green O-ring on the MAP sensor to a slightly larger o-ring since the hole on the N20 boost adapter is slightly too large. Also added some washer/rings on the screws that came with the adaptor because the screws are too long. Of course you'll have to seal the stock vacuum nipple since it's unused.

I'm running the TIAL with 11 psi spring, no problem with turbo surge or any leaks on the adapter so far. Below are some pictures:
Attached Images
    
__________________
|2012 AW 1M Coupe| |MHD Stg 2| |Ohlins R&T| |VRSF CP| |VRSF 7" HD| |Tial BOV| |Akrapovic Full Evolution Exhaust System + DP| |AP Racing Radical II| |Raceseng Slammer| |Pedalhaus|
Appreciate 0
      01-23-2019, 10:23 PM   #2
lightning
First Lieutenant
Singapore
37
Rep
345
Posts

Drives: 1M Pure S2
Join Date: Sep 2009
Location: Singapore

iTrader: (0)

Thats really really nice!! thank you for this wonderful information

btw can you post the link that you bought this part from on eBay?
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 03:29 AM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST