-=EMS=- Helix Stepped Core Intercooler For 135

Andrew@ET · 02-06-2009, 02:49 PM

Exquisite MotorSports is proud to present Helix Products !!!
First up:

Helix is proud to introduce the first stepped core intercooler for the BMW 335i/135/535. This intercooler design is unique in that it has a bigger frontal ambient face combined with thicker-than-stock core that seals off to the radiator fan/shroud. The cast end tanks have factory mounting points and factory charge pipe angles. Installation is pretty straight forward and does not require removal of the front bumper.

Install:
Fits in stock location- YES
requires no cutting,removal and/or permanent modification- For the 335 YES (Minor trimming for the 135)
Can it be installed without removing front Bumper- YES
Utilizes factory mounting points- Yes
Design:
More core volume than stock- Yes 56%
More Ambient face than stock- Yes 56%
More charge rows than stock(8)- Yes 13
Bar and Plate construction- Yes
Removes restrictive stock O ring connectors- Yes
Seals to factory radiator fan shroud so air is drawn through when car is not in motion- Yes
Performance:
Helix intercooler at 13.5psi 63 degree ambient temps:
372whp +22whp
turbo outlet temperature 228 degrees F(estimated using a 63 degree ambient and 65% compressor efficiency at 13.5 psi)
AIT temp- 75 degrees F - 54 degree drop over stock
pre and post intercooler temp drop- 153 degrees F
Intercooler efficiency- 93% - 33% improvement in efficiency over stock
Core pressure drop spec is .5psi at 450hp(600cfm) airflow

Price $969

Andrew@ET · 02-07-2009, 08:12 PM

will be instock in 6-8 weeks

993 911 · 02-07-2009, 08:27 PM

So what needs to be trimmed?

Andrew@ET · 02-08-2009, 09:39 PM

Just shaving down a small section of the OEM fmic bracket. Same as all the others

Raflekt · 02-08-2009, 10:40 PM

This is hard my next mod is

My options are

Code 3

And now

Helix

I will pm you soon

Rafael

Andrew@ET · 02-10-2009, 11:47 AM

Cant wait to hear from you

Andrew@ET · 02-10-2009, 01:55 PM

well the dyno was done with a tune obviously with more boost comes more heat if you look at the oem vs helix intercooler air temps if your running a tune the intercooler would show more gains against a stock ecu.

Red135 · 02-10-2009, 04:28 PM

That is not an 'intro' price, correct?

Andrew@ET · 02-10-2009, 04:46 PM

Nope that is the regular price ...

will be in stock in 6-7 weeks

we are taking pre orders supply could be limited

02-06-2009, 02:49 PM	#1
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	-=EMS=- Helix Stepped Core Intercooler For 135 Exquisite MotorSports is proud to present Helix Products !!! First up: Helix is proud to introduce the first stepped core intercooler for the BMW 335i/135/535. This intercooler design is unique in that it has a bigger frontal ambient face combined with thicker-than-stock core that seals off to the radiator fan/shroud. The cast end tanks have factory mounting points and factory charge pipe angles. Installation is pretty straight forward and does not require removal of the front bumper. Install: Fits in stock location- YES requires no cutting,removal and/or permanent modification- For the 335 YES (Minor trimming for the 135) Can it be installed without removing front Bumper- YES Utilizes factory mounting points- Yes Design: More core volume than stock- Yes 56% More Ambient face than stock- Yes 56% More charge rows than stock(8)- Yes 13 Bar and Plate construction- Yes Removes restrictive stock O ring connectors- Yes Seals to factory radiator fan shroud so air is drawn through when car is not in motion- Yes Performance: Helix intercooler at 13.5psi 63 degree ambient temps: 372whp +22whp turbo outlet temperature 228 degrees F(estimated using a 63 degree ambient and 65% compressor efficiency at 13.5 psi) AIT temp- 75 degrees F - 54 degree drop over stock pre and post intercooler temp drop- 153 degrees F Intercooler efficiency- 93% - 33% improvement in efficiency over stock Core pressure drop spec is .5psi at 450hp(600cfm) airflow Price $969
	Appreciate 0 Tweet

02-07-2009, 08:12 PM	#2
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	will be instock in 6-8 weeks
	Appreciate 0

02-07-2009, 08:27 PM	#3
993 911 Captain 47 Rep 882 Posts Drives: Z3M, F31, G07 Join Date: Jan 2007 Location: Portland iTrader: (0)	So what needs to be trimmed?
	Appreciate 0

02-08-2009, 09:39 PM	#4
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	Just shaving down a small section of the OEM fmic bracket. Same as all the others
	Appreciate 0

02-08-2009, 10:40 PM	#5
Raflekt First Lieutenant 20 Rep 354 Posts Drives: 2009 AW 135i fully loaded Join Date: Jan 2009 Location: Mexico iTrader: (0)	This is hard my next mod is My options are Code 3 And now Helix I will pm you soon Rafael __________________ 2009 AW 135i CP-E CATLESS DPS, AFE EXHAUST , OIL COOLER KIT,FORGE DVV,,BMW PERFORMANCE SIDE SKIRTS AND BMW P . PEDALS, BMW PERFORMANCE SPOILER , BMW PERFOMANCE KIDNEY GRILLS, CODE 3 IC, DIREZZA Z1 STAR SPEC
	Appreciate 0

02-10-2009, 11:47 AM	#6
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	Cant wait to hear from you
	Appreciate 0

02-10-2009, 01:55 PM	#7
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	well the dyno was done with a tune obviously with more boost comes more heat if you look at the oem vs helix intercooler air temps if your running a tune the intercooler would show more gains against a stock ecu.
	Appreciate 0

02-10-2009, 04:28 PM	#8
Red135 La Flama Blanca 27 Rep 1,545 Posts Drives: 1-series Join Date: Mar 2008 Location: Abq, NM iTrader: (1)	That is not an 'intro' price, correct?
	Appreciate 0

02-10-2009, 04:46 PM	#9
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	Nope that is the regular price ... will be in stock in 6-7 weeks we are taking pre orders supply could be limited
	Appreciate 0