03-02-2016, 01:26 PM | #1 |
Private
32
Rep 58
Posts |
KW coils and camber plates?
Guys, girls too
I am writing in search of info on how to possibly use the KW V3 suspension with my DS Motorsport camber plates. I bought the camber plates used from a 1M car that was using Öhlins suspension as the seller told me... It just does not make sense - my KW V3 has conical springs and there seems to be no way to use the original upper strut mounts with the camber plates. Must I use the upper spring plate etc from a regular E82 or what would be the solution to fix the spring and also not have the "bush" just be resting on the camber plate studs... ? here is photo of the DS Motorsport camber plate |
03-02-2016, 08:21 PM | #3 |
Colonel
2617
Rep 2,819
Posts
Drives: e82 1M, f87 M2cs
Join Date: Nov 2011
Location: Tri-Cities, Washington
|
I believe KW coilovers are not compatible with the stock mount. Camber plates for most coilovers are different than camber plates designed for use on the OEM struts because most coilovers are not compatible with the OEM strut mounts.
Ohlin's is an EXCEPTION to that. If these camber plates were used with an Ohlin's suspension, they are probably compatible with stock struts, and will not be compatible with KWV3. |
Appreciate
0
|
03-03-2016, 07:49 AM | #5 |
Colonel
2617
Rep 2,819
Posts
Drives: e82 1M, f87 M2cs
Join Date: Nov 2011
Location: Tri-Cities, Washington
|
My point was that if the camber plates you showed above were on a set of Ohlins, they may not be compatible with the KWv3.
|
Appreciate
0
|
04-13-2016, 09:51 PM | #6 |
Supreme Allied Commander
3839
Rep 54,348
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
|
Appreciate
0
|
04-14-2016, 07:26 AM | #7 |
Colonel
2617
Rep 2,819
Posts
Drives: e82 1M, f87 M2cs
Join Date: Nov 2011
Location: Tri-Cities, Washington
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|