|
|
|
12-15-2009, 04:09 PM | #1 |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
HP Autosport Adjustable Swaybar Endlinks
When you lower the vehicle, the swaybar is moved from the ideal factory geometry to an offset that decreases the ability of the swaybar to perform. The swaybar frame mount and the end of the bar should be on the same horizontal plane. The factory end links are a solid piece. When the car is lowered, the OEM links cannot compensate for the longer length needed to keep the swaybar in its ideal location. Get immediate response from your sway bar and precise control over your suspension. What this means to you is tighter, more responsive handling.
HP Autowerks is happy to introduce adjustable end links. With adjustable end links you can return the bar to its ideal leverage point while lowered. They also afford the peace of mind that the links or shock link mount will not fail as is common in factory units, as they will now be adjusted properly. The links are adjustable in length up to an additional 1.25" over stock. HP Autowerks end links are adjustable while on the vehicle. These end links will fit the following vehicles: E9x 3-Series and M3 Front (no-xi) E82 3-Series Front https://hpautosport.com/product/hp-a...ybar-endlinks/ $159.99 pair Is your jam nut constantly coming loose on you? Apply this wicking thread locker will keep the jam nut from coming loose on you: https://www.amazon.com/gp/product/B0...d57dbfab1b5a93 Last edited by HP Autosport; 07-02-2023 at 02:12 PM.. |
04-07-2011, 09:50 PM | #3 |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
If you have lowered your car or using other after anti roll bar with cheap endlinks, you need these!
|
Appreciate
0
|
04-14-2011, 11:03 PM | #4 |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
FK length adjustable endlinks kits are now in stock. No waiting!
|
Appreciate
0
|
08-12-2011, 12:23 AM | #5 |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
All lengths except for FK's are good in stock.
FK's should be back in stock in a week. |
Appreciate
0
|
09-03-2011, 03:15 AM | #8 |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
|
Appreciate
0
|
09-20-2011, 01:22 AM | #10 | |
Major
57
Rep 1,477
Posts |
Quote:
I have run aftermarket adjustable end links in the past and all end up becoming noisy at some point. I would love to keep the stock for that reason but it is not good to pre-load the bar. I hope (and expect) the ones Harold sells to be noise-free even after they are on the car for a while. |
|
Appreciate
0
|
10-01-2011, 11:50 AM | #11 | |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
Quote:
|
|
Appreciate
0
|
10-18-2011, 12:31 AM | #12 |
Captain
55
Rep 941
Posts |
these hook up to the stock sway bar correct?
Also, if i have a 1 inch drop, the proper adjustment for the adjustable end links will be a setting longer than stock correct? If i have a 1" drop should i get the 12" endlinks (min length) ?
__________________
JB4, DCI, Digi boost, CSL eyelids, 5% tint, KW v2's. Bastuck 85mm quad w/ berk resonated mids, LED int ltg, Perf SSK, CF int trim, 19" SF-71 rims, CDV mod, BMS OCC, ER+tial charge pipe. AR DP's, Helix IC,meth, drilled slotted rotors
|
Appreciate
0
|
10-18-2011, 01:10 AM | #13 |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
Yes to the first two questions. On the third you can iether get 11.5"(adjustable up to 1.25" longer) or 12"
|
Appreciate
2
kustom19513.00 |
10-31-2011, 05:24 PM | #14 |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
Adjustable sway bar end links
FK coil over owners...If your FK end links are shot, these are an excellent replacement for them!
|
Appreciate
0
|
05-14-2012, 04:56 PM | #15 |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
FK style links
FK coil over length replacement links are back in stock!
|
Appreciate
0
|
08-10-2014, 01:50 AM | #19 |
Major
1315
Rep 1,183
Posts |
Hey Harold. I got a set from my friend Marco. I have springs 1.5 drop stock dampers for now. Can you tell me what length I should adjust them to be ideal for my current setup ?
Thanks, g |
Appreciate
0
|
08-11-2014, 12:39 PM | #20 |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
From center to center of the joints should be 11.5", you can adjusted for another 1" longer, that should be all you need.
|
Appreciate
0
|
08-11-2014, 09:03 PM | #21 | |
Major
1315
Rep 1,183
Posts |
Quote:
|
|
Appreciate
0
|
08-13-2014, 02:25 AM | #22 |
Supreme Allied Commander
4103
Rep 55,911
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|