|
|
|
09-29-2016, 11:43 AM | #1 |
Enlisted Member
10
Rep 45
Posts |
18 x 8.5 ET 35 fit in rear?
Hi, looking at getting new wheels soon
( http://jr-wheels.com/towar.2120.japa...achined.s.html ) But I'm really not good with sizes or anything when it comes to wheels. Would anyone tell me if these are going to fit, 18x8.5 ET35 all round? Currently on stock M Sport suspension but going get order Eibach Pro Springs as well. Thanks |
09-29-2016, 02:45 PM | #2 |
Private First Class
26
Rep 114
Posts |
Ive got 18x9.5 et45 in the rear, havent rubbed once since i put them on 3 months ago. And they look like theyve got tons of room for me to lower the car
|
Appreciate
0
|
09-30-2016, 01:22 PM | #3 |
Second Lieutenant
103
Rep 266
Posts |
I'm on 18" 8.5j ET38 squared.
My tires are MPSS Front 225/40 R18 Rear 245/35 R18 Fitment is perfect IMO. No mods to the suspension except the camber pin removal in the front. My alignment shop may have compensated for this when they tried to bring it back to factory specs. The previous owner had the fenders pulled/rolled a bit and may have lowered the ride height very slightly from what I can tell. ZERO rubbing (with and without load) but this may be the closest you can get. ET35 is a little bit closer (3mm) to the rubbing zone and may make contact depending on the tire. Hope that helps a bit, best of luck! |
Appreciate
0
|
10-07-2016, 04:53 AM | #5 |
Lieutenant
189
Rep 585
Posts |
Should be fine, put the details into http://www.willtheyfit.com]willtheyfit.com
Are you keeping the same tyres? or going wider?
__________________
If its broke.. Mod it! if not, mod it anyway!
|
Appreciate
0
|
10-07-2016, 10:19 AM | #7 |
Lieutenant
189
Rep 585
Posts |
OEM 261Ms on the 135i are 8.5J ET 52 on the rear, OP has said he's looking at 8.5J ET 35, so the rim will sit 17mm further away from the strut etc.
__________________
If its broke.. Mod it! if not, mod it anyway!
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
wheels, wheels 18" |
Thread Tools | Search this Thread |
|
|