|
|
|
07-28-2017, 09:55 AM | #1 |
New Member
2
Rep 8
Posts |
Bay Area suspensions
Anyone in the Bay Area with TCK or Ohlins coils willing to give a quick ride to someone interested in feeling the characteristics of the suspension? Will trade for $/Beer/Food
I'm currently on H&R coils and looking to upgrade but am torn between TCK and Ohlins for my daily. Read great things about both and want to feel what they're like (if possible) before pulling the trigger. |
07-28-2017, 12:57 PM | #2 | |
Boost
1354
Rep 3,692
Posts
Drives: 135i M-Sport
Join Date: Feb 2014
Location: Valley of Silicon, CA - United States
|
Quote:
I'm in the bay area with this setup - #400/#700 swift springs and the XTA come with the KW clubsport camber plates. They're built in the same plant as the KW V3 and use all KW parts - unless you live in the snow/salt these are perfect for a dual duty car.
__________________
F80 M3 TrackBoi, Z4MC GarageBoi, 1M Clone StreetBoi
|
|
Appreciate
0
|
07-31-2017, 01:01 PM | #3 | |
New Member
2
Rep 8
Posts |
Quote:
That's a good point, I never even looked at ST XTAs but feel like I need to now. The main reason I was considering the TCK coils was that they're Koni-based, more common quicker/cheaper to rebuild when it'll be required in the next few years. There's a lot of hype around the Ohlins and people claiming the valving is fantastic for on-street use as well as track but really, most of my time is spent commuting and some spirited driving around the fun roads we have in the Bay Area so that's not necessary. Thank you for the input! |
|
Appreciate
0
|
07-31-2017, 01:57 PM | #5 |
Boost
1354
Rep 3,692
Posts
Drives: 135i M-Sport
Join Date: Feb 2014
Location: Valley of Silicon, CA - United States
|
No problem, I'm running swift springs so it's probably not an apples to apples comparison to stock XTAs. I'm in San Jose if you'd like to ride around though!
__________________
F80 M3 TrackBoi, Z4MC GarageBoi, 1M Clone StreetBoi
|
Appreciate
0
|
08-07-2017, 04:53 PM | #7 |
Captain
68
Rep 643
Posts |
Ive run both Ohlins AND ST coilovers.
The Ohlins were more money, and offered some adjustment, and the spring rates were not OK for my 135 (IMO) so I changed the rates a little in the rear. Ohlins are NICE STUFF! Believe everything you hear about them! ST coilovers are made by KW, and can be compared directly to KW V1 and V2 as far as I know, just the difference in outer shock case material (only an issue if you live in areas of high corrosion) and the ST's are a LOT less money, but made by KW, a reputable company. I ran the ST's on my BRZ, and what I liked was that the spring rates that came with the ST's were softer than all the other aftermarket kits, stiffer than stock, but softer than any of the others. I messed my other cars up by going too hard on the springs on a street car, ruining the ride. |
Appreciate
1
Rundskop148.00 |
08-23-2017, 12:38 PM | #8 |
New Member
2
Rep 8
Posts |
Thank you for the input!
This is the kind of info I'm looking for, appreciate the willingness to help. Spxxx graciously offered a ride in his 135 so I'll get to experience the XTA+Swift springs first-hand. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|