BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      03-15-2024, 12:53 AM   #1057
autobahn_don
Registered
autobahn_don's Avatar
5
Rep
4
Posts

Drives: BMW 128i
Join Date: Mar 2024
Location: Southfield, MI

iTrader: (0)

Woooo, first post here! Long time lurker... Stoked to add to this thread. This is my outgoing set up. Will post my new set up later this season.

Wheels: Kosei K1 - super cheap, super light!!!

Front: 17 x 8.5 +40
Spacer: none

Rear: 17 x 8.5 +40
Spacer: none

Tires: Falken FK510
Front: 225/45R17
Rear: 225/45R17

Suspension/Fender Mods/Camber:

Bilstein B12 ProKit
No fender mods
-3.0 Front camber (M3 LCAs, Turner camber plates)
-1.5 Rear camber

Notes:
This a pretty tame set up. Run it hard at the track with no rubbing issues. I will make a new post when I move to RT660s (likely a 235/45R17).

Also note, the wheels have no issues clearing 135i 6 piston front brake calipers.

Appreciate 2
Geran7.50
      04-04-2024, 09:36 PM   #1058
Childish_cambino
Private
Childish_cambino's Avatar
237
Rep
64
Posts

Drives: BMW 135is
Join Date: Nov 2023
Location: Atlanta

iTrader: (0)

Garage List
2013 BMW 135is  [9.50]
Quote:
Originally Posted by SKI-R View Post
Must have negative camber, probably a front spacer, very likely rear fenders rolled.

For comparison, the ‘existing’ is the biggest factory setup I found listed, new is your setup: https://www.willtheyfit.com/index.ph...h=8&offset2=45

A great reference: https://support.apexraceparts.com/hc...-Fitment-Guide

My 17x8.5 ET40 245/40 do not rub on my lowered car (ever). My 17x9 ET41 255/40 rub in the rear with straight line driving (expansion joint impacts), but not while under cornering load. I need a 5mm spacer in front. I’m heavily cambered -3.6/-2.2 AND rolled fenders in the back. New untested setup for me will be 17x9 ET45 255/40 with a bigger front spacer, the rear SHOULD be rub free.
I just got my new set of 17x8.5 et40 with 245/40 and I’m dealing with some rubbing on the rear at the moment. I’m pretty low and currently -1.5* on the rear (maxed) without rolled fenders. How aggressive of a roll did you have to do to get everything to fit? Just asking because our setups are pretty similar. I’d love to avoid rolling fenders but the e9x hub conversion is way too expensive for it to make sense atm
Appreciate 0
      05-27-2024, 05:13 PM   #1059
dfqnexxus
New Member
0
Rep
10
Posts

Drives: 2008 BMW 135i Conv
Join Date: May 2024
Location: USA Texas

iTrader: (0)

Can u post a couple pic of em i just got the same wheels but with a different offset i think imna rub bad
Appreciate 0
      06-12-2024, 04:15 PM   #1060
organiicG
Registered
2
Rep
2
Posts

Drives: 2011 BMW 128i Cab.
Join Date: Mar 2024
Location: SC

iTrader: (0)

Wheels: BMW Style 230

Front: 19 x 8 +37
Spacer: none

Rear: 19 x 9 +39
Spacer: none

Tires: Michelin Pilot Sport 4S
Front: 225/35R19
Rear: 225/35R19

Suspension/Fender Mods/Camber:
None

No fender mods (yet)
Planning on pulling the fronts out a little bit.

Notes:
I friggin love this set up. This car has been a little project for my gf and I. Believe it or not, pretty minimal rub considering how aggressive the offset is. Really only rubs on BIG bumps, otherwise its quite nice.



Appreciate 1
      06-17-2024, 01:43 PM   #1061
Andrew517
Private
8
Rep
63
Posts

Drives: BMW135
Join Date: Nov 2010
Location: HONG KONG

iTrader: (0)

Currently

Wheels
Front : 18” x 7.5J ET 49
Rear : 18” x 8.5J ET 52

Tyre
Front : 215/40/R18
Rear : 245/35/R18

BMW performance suspension kit

Now I wanner go for BBS Rims that
Front : 18” x 8J ET 45
Rear : 18” x 9J ET50

I plan to keep the same tyre spec. Therefore, I would like to know the new rims will have enough clearance for both calipers, and any chance rear tyres will rub against the fender even heavy load occasionally? Thanks!
Appreciate 0
      08-28-2024, 01:03 PM   #1062
Thraxe
Registered
0
Rep
1
Posts

Drives: BMW 135i
Join Date: Aug 2024
Location: Quebec

iTrader: (0)

Hello guys, trying to find if someone already tried VMR 703
18x8.5 ET35
225/40/18 and 255/35/18OR245/35/18
135i on bilstein b12

Last edited by Thraxe; 08-28-2024 at 01:37 PM..
Appreciate 0
      09-27-2024, 09:44 PM   #1063
chrisman
Registered
0
Rep
3
Posts

Drives: BMW 135i
Join Date: Aug 2024
Location: Los Angeles

iTrader: (0)

Fitment help

Hey guys, was wondering if anyone has done this setup or knew if it would work.

I saw on youtube someone did ST XTA coilovers with the recommended apex fitment and ended up needing to put 10mm spacers all around to make it work so his fitment ended up being Front: 18x8.5 et35, Rear: 18X9.5 et47. So I'm seeing if getting this setup would work:

Apex EC-7 with ST XTA coilovers.

Front: 18x8.5 et35
Rear: 18x9.5 et43

If so, any tire recs?
Appreciate 0
      10-31-2024, 10:20 AM   #1064
mkeiser
Lieutenant
694
Rep
446
Posts

Drives: e82 128i 6mt m sport
Join Date: Jan 2022
Location: Minneapolis, MN

iTrader: (0)

Figured I'd post my winter setup in here.

Style 157's, forged 17x8 et34, 20lbs w/o tires. Tires are Continental VikingContact 7, 225/45r17.

Car is on Koni Yellows w/ H&R Sport springs, running -2.7* camber in front and -2* in rear. I noticed a little rubbing in the rear going in and out of my driveway. Seems like they're rubbing on the fender liner, not the fender itself.

The plan is to use the same Style 157's with 245/40r17 in the summer which will clear my f30 brembo's... may need to roll the rear fender.

View post on imgur.com
__________________
2011 BMW 128i 6MT M Sport - Alpine White on Terracotta w/ Glacier-Silver trim - Koni Yellows w/ H&R Sport Springs, M3 Control Arms, Euro Intake, BMW Performance Exhaust, 3.73 Diff w/ RacingDiffs LSD Conversion, Black Line Taillights, M Performance Grilles, lots-o-maintenance
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:32 PM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST