M-Tech Body Kits

[yesido]

The supercharger made my 1er driving more fun than before.
http://www.1addicts.com/forums/showthread.php?t=563787

This weekend I took it cruising around town. Now it's easy to have a spirited driving.

After installing s/c kit, I decided to change my front bumper to cover the huge intercooler from ARMA. So I replace with the new M-tech front bumper. Grille changed as well.

How about it?

[RaihaX]

looking good - need some fog light (I assume that is what the holes are for?)

[MPFit]

x2 on the foglights

I like it alot though, it's subtle, almost stock-like and it does its job hiding the intercooler!
Classy mod imo

[strati1]

is that on an n52? if so enlighten me about your setup

[RaihaX]

That is the N46 i think?

[taichi]

Originally Posted by strati1

is that on an n52? if so enlighten me about your setup

I believe it is on an n52, I saw a thread somewhere over at the E90post forum, it's the Arma Supercharger from Taiwan.

Here's some more info you can google:

We are a team of professional supercharger specialists in Taiwan and USA. With more than 20 years accumulated experience in automotive industry, ARMA Supercharger is now here to offer you the most efficient and reliable supercharger systems available on the market.

ARMA supercharger systems do not only provide you the high performance you desire but also maintain the reliability of an OEM vehicle. Team ARMA consists of R&D engineers based in the United States and precise manufacturing factory located in Taiwan. Team ARMA professionals have at least over 10 years in different high performance fields.

In addition, each prototype supercharger unit has been road tested on different applications for 100,000 miles before it can be approved for production. This means our products are most durable and practical for daily usage.

Supercharger Kits for the N52 series engines.

Kits for E90-93 2.3 2.5 2.8 3.0 L

Stage 1 Kit:
Supercharger, mounting brackets, idler pulleys and accessory drive belt, high-flow air filter, supercharger inlet duct, hardware accessories.
Default compression value is set at 0.7BAR(10.15PSI)

Stage 2 Kit:
Supercharger, mounting brackets, idler pulleys and accessory drive belt, high-flow air filter, supercharger inlet duct, hardware accessories, Fuel Management Computer (FMC), fuel injectors, by pass valve, intercooler.
Default compression value is set at 0.5BAR(7.25PSI)





Stage 1 Kit:
Supercharger, mounting brackets, idler pulleys and accessory drive belt, high-flow air filter, supercharger inlet duct, hardware accessories.

Stage 2 Kit:
Supercharger, mounting brackets, idler pulleys and accessory drive belt, high-flow air filter, supercharger inlet duct, hardware accessories, Fuel Management Computer (FMC), fuel injectors, by pass valve, intercooler.


Description

The power performance of BMW 6-cylinder N52 is pretty competitive, but in the realm of BMW, the E9X M3 from the 3-series is always being the leading roll on the street. The 335 Twin-Turbo Superchargers also give very outstanding result. Although it is 6-cylinder engine, but the 3-series without supercharging system, they still can not compete with the M3 and 335 Twin-Turbo of 4.0. ARMA has further boosted the 3-series 6-cylinder autos’ power, and the motorists for this natural inlet motor are able to challenge the 355s. This system is exclusively added the ARMA-developed STAGE-2 mechanical supercharging system. The horsepower testing shows that the N52 323 2.5 engine’s torque can reach to the level at 313PHP 370 NM, and the 325 2.5 can drive to the torque at 350HP 410NM, moreover, the 330s are even comparable to the torque of V8M3 at 425HP 510NM. The Front Mount Air-to-Air Intercooler, exclusive computer and ARMA Exhaust are the indispensables to push the 3-series to the ultimate. To equip the full kit of ARMA Mechanical Supercharging System is the best buy for the 3-series owners.

Stage 1
It is bundled with the basic accessories for supercharging system. The estimated installation time should be only around 6 to 8 hours under normal circumstances.efault compression value is set at 0.7BAR(10.15PSI) It can work right after the kit installation. The cooling and fuel-supply system are not provided, this kit is only for the tuning garage, but not for the common motorists. The kit’s d

Stage 2
This is the most complete SUPERCHARGER Kit. The estimated installation time should be only around 6 to 8 hours under normal circumstances. In addition to the Fuel Management System, the Intercooler and by pass valve are also included. This Intercooler is tailor-made for the mechanical supercharging system, which is not only low pressure loss, but high efficiency of heat conduction and being artistic. ARMA R&D team spent much effort on the design of the kit. The design make the hood looking very dynamic, and the sound volume of the by pass valve is also exceptional. The blow-off sound over 120db will be all the way while running. The throttle is going to retrieve 0.2BAR(2.9PSI) automatically, and at the moment of stepping on the gas, the reaction on supercharging and efficiency are other assets of the ARMA Supercharging System. The detailed installation process is presented in our Installation Guide, and the technical support can be provided by ARMA Team. Not only the do-it-yourself motorists but any auto-tuning garages will find no difficulties to install and enjoy the speed provided by ARMA Supercharger System. The default compression value for this kit is set at 0.5 BAR(7.25PSI).

[Choclove23]

I wanna supercharge my 130i now...

[RaihaX]

Isn't the op car 120 thus not a n52?

[yesido]

It's N46! (120i)

I posted on wrong community?

[RaihaX]

Originally Posted by yesido

It's N46! (120i)

I posted on wrong community?

No I am sure is fine haha

[e90like]

nice front bumper!

[FGT3D]

Hi! I'm a newbie, Can we buy a bumper like that in Hongkong? and where? TIA

[jeycie]

freakin e90 sounds like a jet

[GT1281]

Is that homemade?

[yesido]

Originally Posted by FGT3D

Hi! I'm a newbie, Can we buy a bumper like that in Hongkong? and where? TIA

I don't know that much, this is done by my friend. LOL

[yesido]

Originally Posted by Phil335

Is that homemade?

why do you think that?

[ippykaye]

Nice car and good job with the conversion yesido....
Just one question- you're in HK? How come the car is LHD?

[yesido]

Special ver.
LOL