Sponsored by The Tire Rack

[_gentry101]

I confirmed today running a factory wheel square set up with Indy 500 255/35r18 will fit without rubbing. (on my vehicle)

135i set up
264 rear wheels on all four corners
Indy 500 255/35r18
Turner 10mm spacers
Eiabach 28mm front sway bar
Factory sport suspension with 70xxx miles

I found while running around town there was no rubbing, I later installed Dinan camber plates and set a conservative front camber setting at -1.7

Completes changes the driving characteristics when autox