TE-37 rep interest

twin fed · 07-23-2012, 10:24 AM

So I have a connect that may be able to produce a TE-37 rep in 1 series fitment, but they would need to see interest. If we could get a list together this might help the cause. We could see about both 18in and 19in fitments. Colors and specific offsets could be discussed later.

1. twin fed
2.
3.
4.
5.

CGMike · 07-23-2012, 12:08 PM

I am interested depending on how close they are and staggered 18s for me

siegester · 07-31-2012, 07:48 PM

What price range?
If these are reasonable and good quality I would be interested in staggered gunmetal 18s. Any chance of a polished lip?

1speedbike · 07-31-2012, 07:56 PM

Them some nice wheels. Gunmetal or black with a polished lip in 18 or 19 would be awesome for me. This all depends on price, though.

BrokenVert · 07-31-2012, 08:51 PM

Price check here too,

Btdubs long time no see. I don't live in Freeport anymore - I miss occasionally seeing your car in the road.

Do you still have the crazy wheels?

Crackerballer · 07-31-2012, 10:48 PM

Yup, as long as they are reasonable price and offset.

twin fed · 08-01-2012, 06:29 AM

I am really trying to gauge interest. I spoke with the guy a few weeks ago and he was a little skeptical about the number of people interested in a 1er fitment. So I put this post up on my own to see if I could genterate interest and then I would pass the info along to him. I have always loved that wheel, just could never justify the cost of the Rays.
Just so that everyone is aware the guy I know is at Konig Wheels (basically the same as ROTA). They always seem to make good quality stuff and I was sponsored by them for a while back when I had my Integra Type R. So lets keep this going and hopefully we can all get what we want.

twin fed · 08-01-2012, 06:30 AM

Quote:

Originally Posted by BrokenVert

Price check here too,

Btdubs long time no see. I don't live in Freeport anymore - I miss occasionally seeing your car in the road.

Do you still have the crazy wheels?

Yeah still around and still rolling with the green wheels, for now. I bought an Audi B8 A4 and have been playing with that.

flinchy · 08-02-2012, 07:42 AM

I'd be keen pending price, and if i could get weird (re: super low - non 1er) offsets

BrokenVert · 08-02-2012, 07:49 AM

Quote:

Originally Posted by twin fed

I am really trying to gauge interest. I spoke with the guy a few weeks ago and he was a little skeptical about the number of people interested in a 1er fitment. So I put this post up on my own to see if I could genterate interest and then I would pass the info along to him. I have always loved that wheel, just could never justify the cost of the Rays.
Just so that everyone is aware the guy I know is at Konig Wheels (basically the same as ROTA). They always seem to make good quality stuff and I was sponsored by them for a while back when I had my Integra Type R. So lets keep this going and hopefully we can all get what we want.

Ohh Konig isnt bad. Lets make them real offsets though. Id love a set of these as track wheels - which is weird because I run track wheels as my street wheels, but whatever!

Quote:

Originally Posted by twin fed

Yeah still around and still rolling with the green wheels, for now. I bought an Audi B8 A4 and have been playing with that.

Lol yep - those crazy green wheels. Miss em. Are you a part of the facebook group? We dont really do meet planning on the forum anymore.

twin fed · 08-02-2012, 01:00 PM

Quote:

Originally Posted by BrokenVert

Ohh Konig isnt bad. Lets make them real offsets though. Id love a set of these as track wheels - which is weird because I run track wheels as my street wheels, but whatever!

Lol yep - those crazy green wheels. Miss em. Are you a part of the facebook group? We dont really do meet planning on the forum anymore.

NO, no facebook for me I am an obstainer. I was wondering why I haven't seen much on here lately.

twin fed · 08-02-2012, 03:24 PM

Quote:

Originally Posted by BrokenVert

haha.

ok. Why not just make a FB of your forum handle then? That way you can at least be part of the planning process

Sorry can't subscribe that whole facebook thing. Just won't do it!!

WhiteTgr135i · 08-03-2012, 02:06 PM

Interested, but need an estimate on the price.

cooler2442 · 08-03-2012, 02:52 PM

I personally don't think the TE37's would look good on our cars since we wouldn't be able to have a sufficient lip size which is what makes them look good on the 1M/M3 but I would love to be proven wrong.

Eyeman · 08-03-2012, 05:38 PM

My offset are listed in my sig. They should be able to make something like this. I agree that they'd look better in a lower offset but I still like them like this. And they are very easy to clean!

siegester · 08-03-2012, 10:02 PM

Quote:

Originally Posted by Eyeman

My offset are listed in my sig. They should be able to make something like this. I agree that they'd look better in a lower offset but I still like them like this. And they are very easy to clean!

An affordable set of those in 18" would be perfect!

twin fed · 08-04-2012, 09:06 AM

I'm liking it. I will try and get some more info in the next week or so and pass it along to you guys.

infinitekidM2C · 08-06-2012, 07:03 PM

lol i love these threads..good luck bro

(no spoilers everyone)

Jophy · 08-12-2012, 03:42 AM

Interested

1speedbike · 08-12-2012, 09:46 PM

Quote:

Originally Posted by twin fed

Sorry can't subscribe that whole facebook thing. Just won't do it!!

Not having a Facebook makes you "suspicious"

NOT HAVING A FACEBOOK MEANS YOU'RE A TERRORIST. REAL MURRICANS HAVE NOTHING TO HIDE

join us join us join us

twin fed · 08-13-2012, 06:55 AM

Quote:

Originally Posted by 1speedbike

Not having a Facebook makes you "suspicious"

NOT HAVING A FACEBOOK MEANS YOU'RE A TERRORIST. REAL MURRICANS HAVE NOTHING TO HIDE

join us join us join us

I know, how crazy is this ^^^^^^

infinitekidM2C · 08-13-2012, 11:09 AM

Quote:

Originally Posted by twin fed

I know, how crazy it this ^^^^^^

i was pressured into fb too; it's basically a cult

07-23-2012, 10:24 AM	#1
twin fed Doc Brown 1176 Rep 2,174 Posts Drives: 2016 MG MT M2 Join Date: May 2008 Location: Isle of Long iTrader: (2)	TE-37 rep interest So I have a connect that may be able to produce a TE-37 rep in 1 series fitment, but they would need to see interest. If we could get a list together this might help the cause. We could see about both 18in and 19in fitments. Colors and specific offsets could be discussed later. 1. twin fed 2. 3. 4. 5. __________________
	Appreciate 0 Tweet Quote

07-23-2012, 12:08 PM	#2
CGMike First Lieutenant 24 Rep 382 Posts Drives: 2011 135i Coupe Sport Join Date: May 2012 Location: Southern CA iTrader: (0)	I am interested depending on how close they are and staggered 18s for me __________________ 2011 Space Grey 135i Sold 06 GTO , 06 WRX, 59 Bug AV cars and Coffee www.facebook.com/Avcarsandcoffee/
	Appreciate 0 Quote

07-31-2012, 07:48 PM	#3
siegester Captain 345 Rep 751 Posts Drives: '20 M340i Join Date: Jan 2011 Location: USA iTrader: (0) Garage List 2020 BMW M340i [0.00]	What price range? If these are reasonable and good quality I would be interested in staggered gunmetal 18s. Any chance of a polished lip?
	Appreciate 0 Quote

07-31-2012, 07:56 PM	#4
1speedbike Brigadier General 732 Rep 3,274 Posts Drives: 2022 X4 M40i, 2008 135i Join Date: Jun 2008 Location: MKE iTrader: (15)	Them some nice wheels. Gunmetal or black with a polished lip in 18 or 19 would be awesome for me. This all depends on price, though. __________________ 2022 X4 M40i - 2008 135i - 2015 F700GS On Order - 2024 i4 M50 Scruffy's gonna die the way he lived... Mmhm.
	Appreciate 0 Quote

07-31-2012, 08:51 PM	#5
BrokenVert Resident Kerbalnaut 477 Rep 10,703 Posts Drives: Topless Brute/Hybrid Boogaloo Join Date: Apr 2009 Location: Fahrvergnügen/NY iTrader: (0)	Price check here too, Btdubs long time no see. I don't live in Freeport anymore - I miss occasionally seeing your car in the road. Do you still have the crazy wheels? __________________
	Appreciate 0 Quote

07-31-2012, 10:48 PM	#6
Crackerballer Macaroni 4 Rep 111 Posts Drives: 2008 AW 135i Join Date: Feb 2012 Location: Durham, NC iTrader: (0)	Yup, as long as they are reasonable price and offset. __________________ --Josh-- 2011 CTS-V Manual, 542rwhp 2015 Lexus GX460 1965 Mustang Fastback
	Appreciate 0 Quote

08-01-2012, 06:29 AM	#7
twin fed Doc Brown 1176 Rep 2,174 Posts Drives: 2016 MG MT M2 Join Date: May 2008 Location: Isle of Long iTrader: (2)	I am really trying to gauge interest. I spoke with the guy a few weeks ago and he was a little skeptical about the number of people interested in a 1er fitment. So I put this post up on my own to see if I could genterate interest and then I would pass the info along to him. I have always loved that wheel, just could never justify the cost of the Rays. Just so that everyone is aware the guy I know is at Konig Wheels (basically the same as ROTA). They always seem to make good quality stuff and I was sponsored by them for a while back when I had my Integra Type R. So lets keep this going and hopefully we can all get what we want. __________________
	Appreciate 0 Quote

08-02-2012, 07:42 AM	#9
flinchy Brigadier General 126 Rep 3,099 Posts Drives: E82 135i Join Date: Nov 2011 Location: QLD, Australia iTrader: (0)	I'd be keen pending price, and if i could get weird (re: super low - non 1er) offsets
	Appreciate 0 Quote

08-03-2012, 02:06 PM	#13
WhiteTgr135i Captain 69 Rep 967 Posts Drives: 2012 BMW 135i Join Date: Jul 2011 Location: City of Rapture iTrader: (5)	Interested, but need an estimate on the price.
	Appreciate 0 Quote

08-03-2012, 02:52 PM	#14
cooler2442 Brigadier General 480 Rep 4,154 Posts Drives: 1/18 Monte Carlo Blue E92 M3 Join Date: Apr 2011 Location: Los Angeles iTrader: (6) Garage List 2016 Porsche GT4 [0.00]	I personally don't think the TE37's would look good on our cars since we wouldn't be able to have a sufficient lip size which is what makes them look good on the 1M/M3 but I would love to be proven wrong.
	Appreciate 0 Quote

08-03-2012, 05:38 PM	#15
Eyeman Colonel 121 Rep 2,037 Posts Drives: 2008 135 blk, blk, step Join Date: Jan 2009 Location: Atlanta, GA iTrader: (0) Garage List 1994 Porsche 968 Cab [0.00] 2017 AMG GTS [0.00] 1994 Porsche 968 Coupe [0.00] 1977 Mercedes 450SE ... [0.00] 2008 135 [8.00]	My offset are listed in my sig. They should be able to make something like this. I agree that they'd look better in a lower offset but I still like them like this. And they are very easy to clean! __________________ Injen, RR OCC, MadDad Whisper, donut spare, 19x8.5et43fr 19x9.5et45r Volk LE37's, rear fenders rolled/pulled, PSS4S 225/35fr 255/30r, KW V1's, AR coated catless dps, Cross strutbar, CF grills and license plate holder, iCarbon diffuser, ETS black anodized FMIC, M3 control arms, Quaife, ER chargepipe, ForgeDV's, Topspeed Custom Tune, V3sims, Braille, Andrey_GTA rear hub mod, Ebay Mstyle front bumper and performance style side skirts.
	Appreciate 0 Quote

08-04-2012, 09:06 AM	#17
twin fed Doc Brown 1176 Rep 2,174 Posts Drives: 2016 MG MT M2 Join Date: May 2008 Location: Isle of Long iTrader: (2)	I'm liking it. I will try and get some more info in the next week or so and pass it along to you guys. __________________
	Appreciate 0 Quote

08-06-2012, 07:03 PM	#18
infinitekidM2C Major General 4207 Rep 5,728 Posts Drives: 2019 M2 Competition Join Date: Nov 2007 Location: Orange County, CA iTrader: (4) Garage List 2019 M2 COMPETITION [9.50] 2008 135i (my old car) [7.39]	lol i love these threads..good luck bro (no spoilers everyone)
	Appreciate 0 Quote

08-12-2012, 03:42 AM	#19
Jophy Private First Class 62 Rep 119 Posts Drives: 2020 M2C Join Date: Dec 2011 Location: Denver, CO iTrader: (0)	Interested __________________ 2020 M2C
	Appreciate 0 Quote