OMGSplitters Front Lip

[519.E82]

As you can tell by the title this is featuring the lip from OMGSplitters also known as fmxomar on the forums here.
This is not a DIY but if you do buy this lip i do highly recommend going with support rods (made that mistake once and broke a lip )
and using larger washers when installing all of the hardware.
For reference I went with the APR 8mm support rods (mostly because they were on sale)
but I would recommend going with the 10mm as the 8mm were too short for
how i wanted to mount it (8mm is still shown in the pictures).

Overall I am very happy with the quality of the lip, the fitment is good and is
adjustable to how ever you want to mount it (no pre-drilled holes).
Installation took me maybe around 2 hours with the bumper off the car,
trying to be very precise, and figure out how to drill all of the holes. The
included hardware was a very nice touch to have as well.

The lip fits all of the 1-series bumpers, below I have it shown of the
Aerodynamic performance bumper, and as a result of this combination I am
not currently running my skid plate as i deemed it much easier that way.


And now the pretty pictures: