BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      03-17-2015, 01:38 PM   #1
feeshta
Second Lieutenant
United_States
58
Rep
244
Posts

Drives: 2012 135i 6MT, Alpine White
Join Date: Oct 2008
Location: Aberdeen MD

iTrader: (0)

How does everyone mount their phone in their 1er?

Hello all. Picked up my new(to me) 135i this past saturday, and in my travels I noticed a minor complication. I use my phone for GPS purposes when needed, and often use Waze to help look out for cops on long trips, even when I know exactly where I am going. This means I need to have the phone plugged in, or it kills the battery pretty quickly. In my old 540i, I simply used a suction cup windshield mount with a magnetic mount for the phone to hold my phone and then plugged the lightning cable into a 2 port USB charger in the stock 12V location. I usually mounted my phone on the left side of the steering wheel next to the A-pillar, as that keeps it out of the way and within arm's reach. Center mounting puts it too far away to reach.

Now, in the 135i, the armrest area location of the charge port makes that impossible, at least without a 6 foot cord or something like that, and I really don't feel like snaking a cord all over the interior. As these cars apparently only do Bluetooth for the purposes of phone calls rather than streaming, it is also important to be able to plug the phone into the factory USB for steering wheel track selection and the like.

So what solutions have you guys seen or come up with for your cars? I know I can't be the only one who wants to have a better solution. Is there some way to get a mount to work down in the center console area? Am I missing something with Bluetooth options? I've tried searching both on google and here on the board for E82 phone mount options, and I'm not coming up with much. the only thing I have seen so far is the one that clips over the vent opening, and I don't really care for that option.

So, any ideas guys?
Appreciate 0
      03-17-2015, 02:03 PM   #2
methodz
First Lieutenant
40
Rep
393
Posts

Drives: '12 Le Mans 135i Vert
Join Date: Jun 2013
Location: Hollywood

iTrader: (3)

I don't know how you want to mount it. I haven't found a good place for my phone yet. I did buy this and am figuring out how to mount tablet on in front of my gps display because I never use it:



My car does both calls and streaming so if yours does not you should look into this:
I had it and it was awesome. Auto paired when I entered the car and pauses music on a call and pauses when the car needs to alert you of something like if you have your phone connected to the car and you only use the kinivo for music.


Appreciate 0
      03-17-2015, 02:16 PM   #3
mahlerbeatdown
First Lieutenant
39
Rep
323
Posts

Drives: '09 128i
Join Date: Apr 2014
Location: New York City

iTrader: (6)

I use a magnetic mount....

Works with ANY case and is very strong. Does not interfere w/ data or anything

http://www.amazon.com/Okra-Universal...vent+car+mount
Appreciate 0
      03-17-2015, 02:33 PM   #4
feeshta
Second Lieutenant
United_States
58
Rep
244
Posts

Drives: 2012 135i 6MT, Alpine White
Join Date: Oct 2008
Location: Aberdeen MD

iTrader: (0)

Quote:
Originally Posted by mahlerbeatdown View Post
I use a magnetic mount....

Works with ANY case and is very strong. Does not interfere w/ data or anything

http://www.amazon.com/Okra-Universal...vent+car+mount
I already have a magnetic mount system. Sorry if that was not clear from my original post. It's called the Wallee, and it looks like this.



It's a case that combines with different magnetic mounts for different purposes. I have the car mount pictured, and a couple of the stick-on disc mounts that I could use if there were a convenient location in the car.

The problem is that my car apparently does not have streaming Bluetooth capability, so streaming my music to the car is not possible without connecting to the USB port either with a cord or a wireless adapter. With a wireless adapter, getting power to the phone for longer trips is still an issue due to the placement of the power sources well away from the windscreen.

Ideally I think I need a way to mount the phone in a place where I can get a USB cord attached to the factory USB port. I would be perfectly willing to modify my car mount, etc. Just don't want to tear up the interior of the car if at all avoidable.
Appreciate 0
      03-17-2015, 02:47 PM   #5
MuNkY6913
The Crowing
MuNkY6913's Avatar
United_States
111
Rep
2,005
Posts

Drives: BMW 135i
Join Date: Feb 2010
Location: State College, PA

iTrader: (4)

Garage List
2009 135i  [8.00]
I use mountek ngroove. Its also magnetic and inserts into the CD slot.
__________________

2009 135i : BMS JB4 G5 ISO,CXRacing FMIC Kit,Injen Cold Air Intake,Evolution Raceworks Charge Pipe,Walboro Inline Fuel Pump, E85 BMS Backend Flash w/ 60% E85,BMS Meth injection (trunkmount),BMS dual meth nozzles,Spec stage 2+ clutch w/ steel SWFW,BMS Catless Downpipes,Berk Tech Race Axleback
Appreciate 1
      03-17-2015, 02:51 PM   #6
feeshta
Second Lieutenant
United_States
58
Rep
244
Posts

Drives: 2012 135i 6MT, Alpine White
Join Date: Oct 2008
Location: Aberdeen MD

iTrader: (0)

Quote:
Originally Posted by MuNkY6913 View Post
I use mountek ngroove. Its also magnetic and inserts into the CD slot.
Hmm, that might actually work. I will have to look into that. I'm very unlikely to get all nostalgic and break out the old CD collection.
Appreciate 0
      03-17-2015, 03:07 PM   #7
MuNkY6913
The Crowing
MuNkY6913's Avatar
United_States
111
Rep
2,005
Posts

Drives: BMW 135i
Join Date: Feb 2010
Location: State College, PA

iTrader: (4)

Garage List
2009 135i  [8.00]
The only draw back I've seen is sometimes it can get loose and wiggle around. Easily fixed by tightening it. It does come with plates for phone or tablet. I have both under the cases and it holds.
Mountek nGroove Snap 3 Magnetic CD Slot Car Mount for Smartphones and Phablets https://www.amazon.com/dp/B00MNXAFQ6..._yKicvb1GY1WGY
__________________

2009 135i : BMS JB4 G5 ISO,CXRacing FMIC Kit,Injen Cold Air Intake,Evolution Raceworks Charge Pipe,Walboro Inline Fuel Pump, E85 BMS Backend Flash w/ 60% E85,BMS Meth injection (trunkmount),BMS dual meth nozzles,Spec stage 2+ clutch w/ steel SWFW,BMS Catless Downpipes,Berk Tech Race Axleback
Appreciate 0
      03-17-2015, 03:09 PM   #8
feeshta
Second Lieutenant
United_States
58
Rep
244
Posts

Drives: 2012 135i 6MT, Alpine White
Join Date: Oct 2008
Location: Aberdeen MD

iTrader: (0)

Quote:
Originally Posted by MuNkY6913 View Post
The only draw back I've seen is sometimes it can get loose and wiggle around. Easily fixed by tightening it. It does come with plates for phone or tablet. I have both under the cases and it holds.
Mountek nGroove Snap 3 Magnetic CD Slot Car Mount for Smartphones and Phablets https://www.amazon.com/dp/B00MNXAFQ6..._yKicvb1GY1WGY
The million dollar question for a person like me might be this one. Does it squeak? Rattles and squeaks drive me batty, so I'm hoping it does not do that.
Appreciate 0
      03-17-2015, 03:15 PM   #9
brocklanders
Major
brocklanders's Avatar
106
Rep
1,428
Posts

Drives: the uno, mineral white
Join Date: Mar 2010
Location: houston

iTrader: (3)

Garage List
06 325  [0.00]
I "mount" mine in the removable cup holder.
Appreciate 1
Pyrat 21417.50
      03-17-2015, 04:09 PM   #10
MuNkY6913
The Crowing
MuNkY6913's Avatar
United_States
111
Rep
2,005
Posts

Drives: BMW 135i
Join Date: Feb 2010
Location: State College, PA

iTrader: (4)

Garage List
2009 135i  [8.00]
Quote:
Originally Posted by feeshta View Post
The million dollar question for a person like me might be this one. Does it squeak? Rattles and squeaks drive me batty, so I'm hoping it does not do that.
Never heard a peep over the past year.
__________________

2009 135i : BMS JB4 G5 ISO,CXRacing FMIC Kit,Injen Cold Air Intake,Evolution Raceworks Charge Pipe,Walboro Inline Fuel Pump, E85 BMS Backend Flash w/ 60% E85,BMS Meth injection (trunkmount),BMS dual meth nozzles,Spec stage 2+ clutch w/ steel SWFW,BMS Catless Downpipes,Berk Tech Race Axleback
Appreciate 0
      03-17-2015, 04:17 PM   #11
Gray_Panther
Brigadier General
Gray_Panther's Avatar
1555
Rep
3,234
Posts

Drives: 128i
Join Date: Jun 2012
Location: Upstate NY

iTrader: (0)

Cup holder.
__________________
2012 BMW 128i 6MT Deep Sea Blue Metallic
Appreciate 0
      03-17-2015, 06:32 PM   #12
yakuza70
Private First Class
yakuza70's Avatar
United_States
17
Rep
118
Posts

Drives: 2011 135i coupe
Join Date: Jul 2013
Location: San Mateo, CA

iTrader: (0)

I use the Kenu Airframe mount. It simply fits onto the air vent in the center of the dash.
__________________
2011 135i DCT, M Sport, Deep Sea Blue
Appreciate 0
      03-17-2015, 08:05 PM   #13
631twentyeighteye
Colonel
631twentyeighteye's Avatar
United_States
198
Rep
2,239
Posts

Drives: 08 335i
Join Date: Aug 2012
Location: Long island

iTrader: (7)

A holder that slides into the CD insert slot like this
http://www.amazon.com/Mountek-nGroov.../dp/B004G1L52Q

I don't leave it there since it blocks a decent bit of the radio screen but it works for when i need a GPS. If i were to do it again i'd probably go along the lines that Yakuza did, with one that clips onto the air vent.
__________________
08 e93 335i MT
Appreciate 0
      03-17-2015, 08:22 PM   #14
chris82
Brigadier General
chris82's Avatar
United_States
827
Rep
3,856
Posts

Drives: 128i
Join Date: Aug 2012
Location: NY NY

iTrader: (8)

Garage List
2009 BMW 128i  [9.80]
If you have the smoker's package, you can open the ash tray lid and that leaves an absolutely perfect spot for a phone to lay there sideways. Doesn't move in turns or braking / accel either.
Appreciate 1
      03-18-2015, 09:03 PM   #15
PA135i
Brigadier General
PA135i's Avatar
United_States
968
Rep
3,323
Posts

Drives: 08 135i 08 CR-V
Join Date: Dec 2007
Location: Pennsylvania

iTrader: (0)

I have a vent mount I bought from Griots garage. Works well on the center vent.
__________________
Sparkling Graphite Metallic / 6MT / Terracotta Boston Leather / Sport Package / Comfort Access system / Gray Poplar wood trim / Heated front seats / iPod and USB adapter / HD radio / Premium hi-fi system / OE Tuning / VRSF Intercooler & charge pipe / BMW Performance short shift kit / BMW M Performance Handbrake Handle / BMW Stainless steel pedals / V1 hardwired / rear sun shades Pennsylvania 20 electoral votes
Appreciate 1
      03-18-2015, 09:42 PM   #16
galois
New Member
1
Rep
17
Posts

Drives: 2017 340i xdrive; 2009 135i
Join Date: Apr 2014
Location: Colorado

iTrader: (0)

I have a Kuda mount (link below) which sits nicely just below the vents (doesn't block air!). I already had an HTC car dock for my phone, so I just took off the plastic/suction and screwed it onto the mount.

http://www.kudausa.com/bmw-1-e81e82e...ack-a1345.html (gps thing is not included, it's just the leather covered mounting spot)

I do have bluetooth, but for USB (for power), I've routed the cord past the vents and then tucked it up under the center console so it is out of the way. I think there's a DIY on that in here somewhere (found it, it's for an F20 but same idea: http://f20.1addicts.com/forums/showthread.php?t=702457 )

Works very well, but was admittedly kind of expensive.
Appreciate 0
      03-18-2015, 10:05 PM   #17
E82.Love
Lieutenant
E82.Love's Avatar
United_States
51
Rep
497
Posts

Drives: E82 128i AW
Join Date: Jul 2014
Location: SoCal, Los Angeles

iTrader: (0)

I just throw mine in my cup holder on the side
__________________
E82.Love | Magnaflow | aFe | H
Appreciate 0
      03-18-2015, 10:22 PM   #18
MuNkY6913
The Crowing
MuNkY6913's Avatar
United_States
111
Rep
2,005
Posts

Drives: BMW 135i
Join Date: Feb 2010
Location: State College, PA

iTrader: (4)

Garage List
2009 135i  [8.00]
My g3 doesn't fit in the cup holder. Don't need to see the radio screen. I leave the phone there all the time. Best thing would be for someone to make a tablet trim piece that replaces the radio. Seen one for the 3 series. Not for the 1 though.
__________________

2009 135i : BMS JB4 G5 ISO,CXRacing FMIC Kit,Injen Cold Air Intake,Evolution Raceworks Charge Pipe,Walboro Inline Fuel Pump, E85 BMS Backend Flash w/ 60% E85,BMS Meth injection (trunkmount),BMS dual meth nozzles,Spec stage 2+ clutch w/ steel SWFW,BMS Catless Downpipes,Berk Tech Race Axleback
Appreciate 0
      03-19-2015, 07:55 AM   #19
RoundelM3
Major General
RoundelM3's Avatar
United_States
1837
Rep
6,990
Posts

Drives: 15 F80 M3, 22 G01 X3 30i
Join Date: Apr 2010
Location: Clayton, NC

iTrader: (2)

Garage List
2022 BMW X3  [9.83]
2015 BMW M3  [6.50]
I leave mine in my pocket, where it belongs.
__________________

2015 F80 ///M3 Sedan 7DCT Tanzanite, 2022 X3 sDrive30i 8AT Brooklyn Grey
Appreciate 1
      03-19-2015, 07:56 AM   #20
spinnakerflying
New Member
9
Rep
29
Posts

Drives: 2016 328i, 2010 135i
Join Date: Jun 2013
Location: Raleigh, NC

iTrader: (0)

Quote:
Originally Posted by yakuza70 View Post
I use the Kenu Airframe mount. It simply fits onto the air vent in the center of the dash.
+1
Appreciate 0
      03-19-2015, 08:16 AM   #21
ejm3
Major
United_States
200
Rep
1,075
Posts

Drives: 2012 135 Convertible 6MT
Join Date: Nov 2011
Location: Connecticut

iTrader: (0)

I use some cheapo vent mount thing and it works fine.
__________________
2012 135 Convertible 6MT
2017 Acura MDX
Appreciate 0
      03-19-2015, 04:50 PM   #22
TJ710
Private First Class
TJ710's Avatar
35
Rep
120
Posts

Drives: 2011 135i
Join Date: Apr 2014
Location: Edina, Mn

iTrader: (0)

Quote:
Originally Posted by roundel335
I leave mine in my pocket, where it belongs.
Good answer.
Appreciate 0
Post Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:58 PM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST