RB Turbo PCV

[drjekl]

Hey guys

I'm ramping up with a list of components for my intake clean with intake profile gaskets, a new valve cover gasket, BMS OCC (which I already have but haven't got around to installing)

One component for which I wish to upgrade is the PCV valve.

Rob Beck from RB Turbos offers a custom PCV valve which basically has been designed to improve upon the existing ventilation system to minimise oil vapour buildup.

http://www.n54tech.com/forums/showthread.php?t=15382





DIY Install instructions:

http://www.n54tech.com/forums/showpo...&postcount=190

RB normally charge $45 per valve + P&H which these days the cheapest option by usps is $23.95 due to their price hike, but Rob is keen to help us guys out downunder and offer me a bulk discount at a reduced price.

The cost will be $45 AUD per valve delivered to your doorstep anywhere in Australia (I will distribute them once they all arrive in Australia).

If you're interested please let me know

For those of you who have minor oil leaks, and would be doing a walnut blast/intake clean the following part #'s are what you would require:


List of part #'s:

Intake manifold profile gaskets: 11 61 7 547 242

Item #2:

Blow by vent hose 11 15 7 553 949 (RB reccomend replacing this item, if you have a OCC you don't need to)



Valve cover kit This is due to a few small minor oil leaks I have found around the engine, which apparently is quite common on the N54

7544369 bolts x 26
11 12 7 565 286 gasket
11 12 7 548 063 bolts x 3
11 12 7 556 977 bolts x 2

These bolts are Al, and its recommended that you replace them, as Al has lower transformation properties in comparison to steel, and thus can fatigue and break off easily upon re torquing or removal.

Gasket:

[JB4-335]

The PCV valve from Rob is a great little product. I installed one on my 135i and I have one for my 335i but just haven't got around to doing it as yet. I also have a spare blow by hose cause its pretty easy to snap the sides of the clip when installing.

Boosted N54's have a real problem with blow by oil. Getting a BMS OCC paired with the upgraded PCV is a must.

[drjekl]

Robs comment over the other thread on e90post:

http://www.e90post.com/forums/showpo...96&postcount=2

[flinchy]

assuming this means you're going to be the point of contact for this bulk order?

put me down for one please

[drjekl]

Originally Posted by flinchy

assuming this means you're going to be the point of contact for a group buy?

put me down for one please

GB is a bit of a dirty word around here

But yes you assumed correct.

[flinchy]

Originally Posted by drjekl

GB is a bit of a dirty word around here

But yes you assumed correct.

fixed haha

awesome

figure i'll need one anyway, and a saving's a saving

[drjekl]

Originally Posted by flinchy

fixed haha

awesome

figure i'll need one anyway, and a saving's a saving

I shall put you down

[flinchy]

Originally Posted by drjekl

I shall put you down

any timeframe ideas at this stage?

[drjekl]

Originally Posted by flinchy

any timeframe ideas at this stage?

Hmm 2-4 weeks hopefully

[Tab135]

Put me down

[Steve500]

Shane,
I'll take one.

[drjekl]

Originally Posted by Steve500

Shane,
I'll take one.

Ha this must be the only mod you haven't done, yet....

[Drawn05]

I'll be in with this too. I am keeping this car for a while so might as well sort this out sooner than later.

[drjekl]

Originally Posted by Drawn05

I'll be in with this too. I am keeping this car for a while so might as well sort this out sooner than later.

Will it fit the TT V8 though? :P

[drjekl]

OK guys, lets get this underway can you please PM me your full name with postal adress, and I will reply with payment details.

Cheers

shane

[drjekl]

Bump, still waiting on a few payments guys

[Drawn05]

Originally Posted by drjekl

Bump, still waiting on a few payments guys

I can drop the cash around today if you want. How much do i owe?

[drjekl]

Originally Posted by Drawn05

I can drop the cash around today if you want. How much do i owe?

No worries mate, you can fix me up when they arrive

[drjekl]

Feel free to drop in Steve today if you're out and about and need your car washed, I'm going to wash the cars today with my snow foam kit and do the 2 bucket wash afterwards and interior cleanup also.

[drjekl]

The majority of payments have been received (thanks guys)

For anyone else interested in purchasing a RB turbo valve, there are still a few remaining

[drjekl]

Update guys!

The valves have been paid for, Rob expects them to be sent out later this week.

If that's the case expect a mid-late June delivery to your doorstep.

[Superdaws]

thanks for the update